Table of Contents
Advertisement
Chapter 3
Installing the DPA 7630/7610
Putting the DPA 7630/7610 in a Rack
Step 1
Step 2
Setting the DPA 7630/7610 on a Shelf or Table
78-11069-03
After the brackets are secured to the chassis, you can rack-mount it
Figure 3-3
Mounting the DPA 7630/7610 in a Rack
LI N E C
LI N E B
The second bracket attaches to the rack at the other side of the chassis.
The brackets can also be installed with the front panel forward.
Lift the DPA 7630/7610 and align the mounting holes in the L brackets with the
mounting holes in the rack.
Secure the chassis by inserting the mounting screws through the holes in the
L brackets and into the threaded holes in the mounting posts.
Before setting the DPA 7630/7610 on a desktop, shelf, or other flat, secure
surface, adhere the rubber feet included with the DPA 7630/7610. To attach them
to the chassis, peel the rubber feet from the adhesive strip and place them
adhesive-side down onto the round, recessed areas on the bottom of the chassis.
Place the DPA 7630/7610 right-side up on a flat, smooth, secure surface.
Cisco DPA 7630/7610 Voice Mail Gateways Administration Guide
LI N E A
P O W E
R
Installing the DPA 7630/7610
(Figure
3-3).
19-inch rack
3-7
Advertisement
Chapters
Table of Contents
Troubleshooting
