Table of Contents
Advertisement
[2] Notes on safety
Use the sewing machine in an area which is free
from sources of strong electrical noise such as
electrical line noise or static electric noise.
Sources of strong electrical noise may cause
problems with correct operation.
Any fluctuations in the power supply voltage
should be within ± 10% of the rated voltage for the
machine.
Voltage fluctuations which are greater than this
may cause problems with correct operation.
The power supply capacity should be greater than
the requirements for the sewing machine's power
consumption.
Insufficient power supply capacity may cause
problems with correct operation.
Machine installation should only be carried out by
a qualified technician.
Contact your Brother dealer or a qualified
electrician for any electrical work that may need to
be done.
The sewing machine weighs approximately 30 kg.
The installation should be carried out by two or
more people.
Do not connent the power cord until installation is
complete. The machine may operate if the treadle
is depressed by mistake, which could result in
injury.
Be sure to connect the ground. If the ground
connection is not secure, you run a high risk of
receiving a serious electric shock, and problems
with correct operation may also occur.
Secure the table so that it will not move when
tilting back the machine head. If the table moves, it
may crush your feet or cause other injuries.
ii
CAUTION
Environmental requirements
Installation
The ambient temperature should be within the
range of 5 ° C to 35 ° C during use.
Temperatures which are lower or higher than this
may cause problems with correct operation.
The relative humidity should be within the range of
45% to 85% during use, and no dew formation
should occur in any devices.
Excessively dry or humid environments and dew
formation
may
operation.
In the event of an electrical storm, turn off the power
and disconnect the power cord from the wall outlet.
Lightning
may
operation.
All cords should be secured at least 25 mm away
from any moving parts. Furthermore, do not
excessively bend the cords or secure them too
firmly with staples, otherwise there is the danger
that fire or electric shocks could occur.
Install the belt covers to the machine head and
motor.
If using a work table which has casters, the casters
should be secured in such a way so that they
cannot move.
Be sure to wear protective goggles and gloves
when handling the lubricating oil, so that it does not
get into your eyes or onto your skin.
If care is not taken, inflammation can result.
Furthermore, do not drink the lubricating oil.
Diarrhea or vomiting may result.
Keep the oil out of the reach of children.
S-1110A
cause
problems
with
cause
problems
with
correct
correct
Hide quick links:
Advertisement
Table of Contents
