Table of Contents
Advertisement
5. INSTALLATION
7
3842M
3843M
4599M
S-1110A
7. Insert the cover (9) of belt cover D
(7) in between the belt cover (2)
and belt cover D (7), and then place
it into the groove of belt cover D (7).
8. Slide the cover (9) down along the
groove of belt cover D (7) as far as
it will go.
9. Pull belt cover D (7) toward you
until there is no clearance between
the belt cover (2) and the cover (9)
of belt cover D (7).
10. Fully tighten the two screws (8).
(Refer to step 6.)
9. Cotton stand
(1) Cotton stand
NOTE:
Securely tighten the nut (4) so that
the two rubber cushions (2) and the
two
washers
(3)
clamped and so that the cotton stand
(1) does not move.
are
securely
Hide quick links:
Advertisement
Table of Contents
