Table of Contents
Advertisement
Port Management
Configuring PoE
STEP 4
Configuring PoE
NOTE
STEP 1
STEP 2
Cisco Small Business SG200 Series 8-port Smart Switches Administration Guide
Click Apply and then click Close. Your changes are saved to the Running
Configuration.
On the SG200-08P, ports 1–4 can operate as a Power-over-Ethernet (PoE) PoE
Power Sourcing Equipment (PSE). A PSE can provide power to connected PoE
Powered Devices (PDs).
On SG200-08P switches, see the following topics for information on the
configuration pages available in the Port Management > PoE menu:
•
Configuring PoE Properties
•
Configuring PoE Port Settings
These configuration pages do not display on switches that do not support PSE
functionality.
Configuring PoE Properties
You can use the Properties page to configure whether the switch generates trap
messages under certain conditions and to view current power settings.
To configure PoE properties:
Click Port Management > PoE > Properties in the navigating window.
Set the following parameters:
•
Power Trap Threshold—Specify a percentage of total available system
power. When the requested power on PoE ports exceeds the threshold, a
trap is generated to the log.
•
Power Management Mode—Select how the switch prioritizes the power
that it provides to multiple ports:
-
Static with Port Priority—Static with priority power management. This
algorithm pre-allocates power based on the configured power limit and
the priority of the port.
5
86
Advertisement
Table of Contents
