Table of Contents
Advertisement
Product Overview
1
2
3
4
5
6
7
1 The chassis is delivered with blank panels where the optional port cards can be installed.
2 Power supplies that are ordered are installed in the switch. If the second power supply is not ordered, a blank panel is installed.
Related Topics
SFP and SFP+ Transceiver Module Ports, on page 3
Half-Wide Modular Slots, on page 4
Power Supply Slots, on page 6
Management Port, on page 7
USB Port Type B, on page 7
USB Type A Port, on page 7
Console Port, on page 8
System Reset Button, on page 8
Blue Beacon Switch
Fan Tray, on page 8
SFP and SFP+ Transceiver Module Ports
The chassis contain 16 ports of 10-Gigabit Ethernet SFP+ or 100BASE-FX fiber-optic transceiver modules.
All ports support 1-Gigabit SFP, 10-Gigabit SFP+, or 100BASE-FX fiber-optic SFP modules.
The ports also support Cisco Trust Security (CTS) and virtual switch link (VSL) and can operate as an Instant
Access (AI) Parent in both 1-Gigabit and 10-Gigabit modes.
The SFP and SFP+ transceiver modules provide copper or fiber-optic connections to other devices. These
transceiver modules are field-replaceable and provide the uplink interfaces when installed in an SFP module
slot. The SFP transceiver modules have LC connectors for fiber-optic connections or RJ-45 connectors for
copper connections.
For a list of supported SFP and SFP+ modules, see the switch data sheet:
products/collateral/switches/catalyst-6880-x-switch/data_sheet_c78-728228.html.
OL-30827-02
16 SFP+ ports or 100BaseFX fiber-optic ports
Four half-wide port card modular slots
1
Two power supply slots
2
Management port (mgmt0)
USB port (disk0)
Console port (RJ-45 con0)
Reset button
SFP and SFP+ Transceiver Module Ports
8
System ID (blue beacon LED)
9
USB port (console port con0)
10
USB LED
11
Status LED
12
Fan tray
13
Handle to hold chassis
http://www.cisco.com/c/en/us/
Catalyst 6880-X Switch Hardware Installation Guide
3
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
