Download Print this page

Stackwise Adapter Blanks; Sfp And Sfp+ Module Cable Specifications - Cisco Catalyst 3650 Series Manual

Hide thumbs Also See for Catalyst 3650 Series:

Appendix B

Connector and Cable Specifications

StackWise Adapter Blanks

A StackWise adapter blank is installed in the stacking port if stacking is not specified at the time of

ordering the switch. The StackWise adapter blank is screwed into the stacking port and must be removed

and replaced by a StackWise adapter if the port is to be used for stacking.

StackWise adapter blank.

Figure B-12

Each port must match the wave-length specifications on each end of the cable, and the cable must not

exceed the stipulated cable length. Copper 1000BASE-T SFP module transceivers use standard four

twisted-pair, Category 5 cable at lengths up to 328 feet (100 meters).

For cabling specifications, refer to the Cisco Transceiver Modules data sheet at:

http://www.cisco.com/en/US/products/hw/modules/ps5455/products_data_sheets_list.html

OL-29734-01

StackWise Adapter Blank

StackWise adapter blank

Assembly screw

Cisco label

Catalyst 3650 Switch Hardware Installation Guide

Cable and Adapter Specifications

Figure B-12

shows a

B-7

Table of Contents