Table of Contents
Advertisement
2.
Slowly turn the LEVEL potentiometer until the picture
on the monitor is as clear as possible and is not too
bright.
Video Drive (VSD) Lens
Set the VSD/DC switch on the rear of the camera (see
Figure
3) to VSD.
Exposure Mode
Automatic Exposure Mode
The Electronic Exposure feature compensates for
excessive light levels by automatically adjusting the shutter
speed of the camera. Set the EE/ME switch to EE
(recommended setting).
Manual Exposure Mode
Set the EE/ME switch to ME. This setting is typically used
only in machine vision applications. The table below gives
the shutter speeds for the switch settings.
EE
ME
AES
AI
OFF
BLC
OFF
FL
OFF
AGC
OFF
WB3
OFF
WB2
OFF
WB1
= ON
LEGEND
= OFF
Caution
Before you adjust the shutter speed, it is
important that you understand how the settings
can affect the scene detail.
Rev 3
Shutter
speed(s)
1/50 (PAL)
1/60 (NTSC)
1/100 (PAL)
1/120 (NTSC)
1/250
1/500
1/1000
1/2000
1/4000
1/10000
Switch Label
FL
BLC
OFF
ON
ON
ON
OFF
OFF
ON
OFF
OFF
ON
ON
ON
OFF
OFF
ON
OFF
5
AES/AI
OFF
OFF
OFF
OFF
ON
ON
ON
ON
G-113077-001
02/07
- Quick Links:
- Camera Settings
Hide quick links:
Advertisement
Table of Contents
