Table of Contents
Advertisement
Quick Links
DRYER INSTALLATION INSTRUCTIONS
Gas (U.S.A. and Canada) & Electric (Canada Only)
INSTRUCTIONS D'INSTALLATION DE LA SÉCHEUSE
Modèles de 29" et de 27" de largeur
À gaz (É.-U. et Canada) et Électrique (Canada uniquement)
Para obtener acceso al manual de uso y cuidado en español, o para obtener información adicional acerca de su producto, visite:
Tenga listo su número de modelo completo. Puede encontrar el número de modelo y de serie dentro de la cavidad superior de la puerta.
Table of Contents
DRYER SAFETY ................................................................
INSTALLATION REQUIREMENTS ....................................
Tools and Parts .................................................................... 4
Location Requirements ...................................................... 5
ELECTRIC DRYER POWER HOOKUP - CANADA ONLY ......... 7
Electrical Requirements ..................................................... 7
Install Leveling Legs ........................................................... 7
GAS DRYER POWER HOOKUP ................................................. 8
Gas Supply Requirements .................................................. 8
Electrical Requirements ..................................................... 9
VENTING .................................................................................... 10
Venting Requirements ....................................................... 10
Plan Vent System ............................................................... 11
Venting Kits ........................................................................ 11
Install Vent System ............................................................ 12
Make Gas Connection ...................................................... 13
Connect Vent ..................................................................... 13
LEVEL DRYER ........................................................................... 14
COMPLETE INSTALLATION CHECKLIST ............................... 14
REVERSE DOOR SWING (OPTIONAL) .................................... 14
TROUBLESHOOTING ............................................................... 22
INSTALLATION NOTES
_________________________________
Date of purchase:
_______________________________
Date of installation:
________________________________________
Installer:
___________________________________
Model number:
___________________________________
Serial number:
W10115228C
W10115229C-SP
29" and 27" Wide Models
www.whirlpool.com
2
4
Table des matières
SÉCURITÉ DE LA SÉCHEUSE .......................................
EXIGENCES D'INSTALLATION ......................................
Outillage et pièces ............................................................ 25
Exigences d'emplacement ............................................... 26
RACCORDEMENT À L'ALIMENTATION ÉLECTRIQUE
DE LA SÉCHEUSE ÉLECTRIQUE - CANADA SEULEMENT ... 28
Spéci cations électriques ................................................ 28
Installation des pieds de nivellement .............................. 29
RACCORDEMENT D'UNE SÉCHEUSE À GAZ ....................... 29
Spéci cations de l'alimentation en gaz .......................... 29
Spéci cations électriques ................................................ 31
L'ÉVACUATION.......................................................................... 32
Exigences concernant l'évacuation ................................ 32
Plani cation du système d'évacuation ........................... 33
Trousses d'évacuation ...................................................... 33
Installation du circuit d'évacuation ................................. 35
Raccordement au gaz ....................................................... 35
Raccordement du conduit d'évacuation ......................... 36
RÉGLAGE DE L'APLOMB DE LA SÉCHEUSE......................... 36
ACHEVER L'INSTALLATION - LISTE DE VÉRIFICATION ....... 37
INVERSION DU SENS DE L'OUVERTURE DE LA PORTE
(FACULTATIF) ............................................................................. 37
DÉPANNAGE ............................................................................. 47
NOTES CONCERNANT L'INSTALLATION
_____________________________________
Date d'achat :
________________________________
Date d'installation :
______________________________________
Installateur :
________________________________
Numéro de modèle :
__________________________________
Numéro de série :
23
25
1
Advertisement
Table of Contents
Related Manuals for Whirlpool W10115228C
Summary of Contents for Whirlpool W10115228C
-
Page 1: Table Of Contents
NOTES CONCERNANT L’INSTALLATION _________________________________ _____________________________________ Date of purchase: Date d’achat : _______________________________ ________________________________ Date of installation: Date d’installation : ________________________________________ ______________________________________ Installer: Installateur : ___________________________________ ________________________________ Model number: Numéro de modèle : ___________________________________ __________________________________ Serial number: Numéro de série : W10115228C W10115229C-SP... -
Page 2: Dryer Safety
DRYER SAFETY... -
Page 4: Installation Requirements
INSTALLATION REQUIREMENTS Tools and Parts Gather the required tools and parts before starting installation. Tools needed for all installations: Adjustable wrench that Caulking gun and compound opens to 1" (25 mm) or (for installing new exhaust vent) hex-head socket wrench Flat-blade screwdriver #2 Phillips screwdriver Utility knife... -
Page 5: Location Requirements
Parts supplied: If you are using power supply cord, a grounded electrical outlet located within 2 ft. (610 mm) of either side of dryer. See “Electrical Requirements.” A sturdy oor to support dryer and a total weight (dryer and load) of 200 lbs. (90.7 kg). The combined weight of a companion appliance should also be considered. -
Page 6: Dryer Dimensions
Installation clearances: The location must be large enough to allow the dryer door to open fully. Most installations require a minimum 5½" (140 mm) clearance behind the dryer for the exhaust vent with elbow. See “Venting Requirements.” 29" Wide Models 27"... -
Page 7: Electric Dryer Power Hookup - Canada Only
ELECTRIC DRYER POWER GROUNDING INSTRUCTIONS HOOKUP – CANADA ONLY For a grounded, cord-connected dryer: This dryer must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electric shock Electrical Requirements by providing a path of least resistance for electric current. This dryer is equipped with a cord having an equipment- grounding conductor and a grounding plug. -
Page 8: Gas Dryer Power Hookup
Gas type Screw in leveling legs Natural gas: This dryer is equipped for use with Natural Gas. It is design- diamond certi ed by CSA International for LP (propane or butane) gases marking with appropriate conversion. Your dryer must have the correct burner for the type of gas in your home. -
Page 9: Electrical Requirements
Option 1 (Recommended Method) Elevations above 10,000 ft. (3,048 m): Flexible stainless steel gas connector: When installed above 10,000 ft. (3,048 m) a 4% reduction of the burner B.T.U. rating shown on the model/serial If local codes permit, use a new exible stainless steel gas number plate is required for each 1,000 ft. -
Page 10: Venting
VENTING Exhaust hoods: Venting Requirements Must be at least 12" (305 mm) from ground or any object that may obstruct exhaust (such as owers, rocks, bushes, or snow). Recommended Styles: Louvered hood Box hood Acceptable Style: WARNING: To reduce the risk of re, this dryer MUST BE EXHAUSTED OUTDOORS. -
Page 11: Plan Vent System
Alternate installations for close clearances Plan Vent System Venting systems come in many varieties. Select the type best for your installation. Two close-clearance installations are shown. Recommended exhaust installations Refer to the manufacturer’s instructions. Typical installations vent the dryer from the rear of the dryer. Other installations are possible. -
Page 12: Install Vent System
Special provisions for mobile home installations: The “Vent System Chart” provides venting requirements that will help achieve best drying performance. The exhaust vent must be securely fastened to a noncombustible portion of the mobile home structure and must not terminate Vent System Chart beneath the mobile home. -
Page 13: Make Gas Connection
Connect vent to exhaust hood Open shut-off valve Closed valve Open valve Open shut-off valve in supply line; valve is open when handle is parallel to gas pipe. Then, test all connections by brushing Vent must t over the exhaust hood. Secure vent to exhaust on an approved noncorrosive leak-detection solution. -
Page 14: Level Dryer
If the dryer will not start, check the following: Level Dryer Dryer is plugged into a grounded 3-prong outlet. Electrical supply is connected. Level dryer Household fuse is intact and tight, or circuit breaker has not tripped. Dryer door is closed. When the dryer has been running for 5 minutes, open the dryer door and feel for heat. - Page 15 29" Wide Model Large Side-Swing Door Remove and transfer hinge hole plugs Place towel on dryer Use a small, at-blade screwdriver to gently remove 4 hinge hole plugs on left side of dryer cabinet. Insert plugs into hinge holes on opposite side of dryer cabinet. Place towel on top of dryer to avoid damaging the surface.
- Page 16 29" Super Wide Side-Swing Door Remove screws from hinges Place towel on dryer Remove screws attaching hinges to door. Place towel on top of dryer to avoid damaging the surface. Remove screws from door Remove bottom screws Remove screws at top, bottom, and side of door (4 screws). Keep door screws separate from hinge screws as they are different sizes.
- Page 17 Flip door over Remove door strike Flip door over so handle side is down. Attach door hinges Remove door strike from dryer cabinet and set aside. Remove and transfer hinge hole plugs Use a small, at-blade screwdriver to gently remove 4 hinge hole plugs on left side of dryer cabinet.
- Page 18 Remove door strike plug Remove bottom screws Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer Remove door strike plug. Insert the door strike removed in cabinet side of hinges. Step 9 into hole and secure with screw.
- Page 19 Remove screws from door Attach door hinges Remove screws at top, bottom, and side of door (6 screws). Keep door screws separate from hinge screws as they are different sizes. Holding door over towel on dryer, grasp sides of outer door and lift to separate it from inner door.
- Page 20 Insert screws in hinge holes on Remove bottom screws dryer cabinet Open dryer door. Remove bottom screws from dryer cabinet side of hinges. Loosen (do not remove) top screws from dryer NOTE: 2 people may be needed to reinstall door. cabinet side of hinges.
- Page 21 Flip door over Rotate outer door Flip door over so handle side is down. Take outer door and rotate it 180º and set it back down on inner door. Be certain to keep cardboard spacer centered between doors. Reattach outer door panel to inner door Remove screws from door panel so handle is on the side where hinges were just removed.
-
Page 22: Troubleshooting
Remove door strike Remove door strike plug Remove door strike from dryer cabinet and set aside. Remove door strike plug. Insert the door strike removed in Step 10 into hole and secure with screw. Insert door strike Remove and transfer plugs plug into original door strike hole and secure with screw.