Table of Contents
Advertisement
For your safety
Safety switch-off for the canopy
If the canopy is prevented from closing
by someone's hand or an object
blocking it, it will be released from the
upper locking mechanism, spring open
and stop closing.
A long audible tone will sound four
times.
The canopy is now in the "maintenance"
position (see "Cleaning and care").
^ Once the obstruction has been
removed, the canopy housing must
be closed up again (see "Cleaning
and care - To close the housing").
^ Then switch the cooker hood on
again by touching the On/Off
sensor s. Wait until the glass slats
have reopened correctly.
^ Finally, switch the cooker hood off
again by touching the On/Off
sensor s.
The canopy and the slats will close.
Safety switch-off for the glass slats
The glass slats are spring loaded. They
yield if they are blocked by somone's
fingers or another object.
dai2517
The extendable slats also have a
release mechanism. If there is a
blockage, they might get stuck in the
open or shut position.
^ Remove the cause of the blockage.
The glass slats will automatically
correct themselves when the canopy is
opened and shut.
^ To do this, switch the cooker hood on
again by touching the On/Off
sensor s. Wait until the canopy has
opened and the fan is running.
^ Then switch the cooker hood off again
by touching the On/Off sensor s.
The canopy will close.
If the glass slats have not corrected
themselves, switch the cooker hood on
and then off again.
Operation
21
- Quick Links:
- Guide to the Appliance
Hide quick links:
Advertisement
Table of Contents
