Related Manuals for Miele DA 6000 W
Summary of Contents for Miele DA 6000 W
-
Page 1: Operating Instructions
Operating instructions Cooker hood DA 6000 W en - GB To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed or used for the first time. M.-Nr. 09 204 950... -
Page 2: Table Of Contents
Miele|home ........ - Page 3 Contents Installation ............29 Installation diagram .
-
Page 4: Caring For The Environment
Caring for the environment Disposal of the packing material Disposal of your old appliance The transport and protective packing Electrical and electronic appliances has been selected from materials which often contain materials which, if are environmentally friendly for handled or disposed of incorrectly, disposal, and should be recycled. -
Page 5: Warning And Safety Instructions
Any other usage is not supported by requirements. Inappropriate use the manufacturer and could be can, however, lead to personal injury dangerous. Miele cannot be held liable and damage to property. for damage resulting from incorrect or improper use or operation. -
Page 6: Technical Safety
Technical safety Installation, maintenance and repairs may only be carried out by a Before installation, check the cooker Miele authorised person in strict hood for visible signs of damage. accordance with current national and Under no circumstances should you local safety regulations. - Page 7 Warning and Safety instructions Do not connect the appliance to the Using at the same time as other mains electricity supply by a heating appliances that depend on multi-socket unit or an extension lead. the air from the room These do not guarantee the required Warning - danger of toxic fumes safety of the appliance (e.g.
- Page 8 Warning and Safety instructions In order to ensure safe operation, and to prevent gases given off by the heating appliances from being drawn back into the room when the cooker hood and the heating appliance are in operation simultaneously, an underpressure in the room of 0.04 mbar (4 pa) is the maximum permissible.
-
Page 9: Correct Use
Warning and Safety instructions Correct use The cooker hood can get very hot during cooking due to heat rising from Always switch the cooker hood on the hob. when a cooking zone is in use, Do not touch the housing or the grease otherwise condensation may collect in filters until the cooker hood has cooled the hood, which could cause corrosion. - Page 10 Safety regulations prohibit the fitting of a cooker hood over solid fuel stoves. All ducting, pipework and fittings must be of non-flammable material. These can be obtained from the Miele Spare Parts department or from builders' merchants. The appliance must not be connected to a chimney or vent flue which is in use.
-
Page 11: How The Cooker Hood Works
How the cooker hood works When the canopy is tilted forwards, cooking vapours are drawn into the open glass slats, through the grease filters inside the cooker hood and then conducted outside. The re-usable metal grease filters remove solid particles (grease, dust, etc.) from the kitchen vapours, preventing soiling of the cooker hood. -
Page 12: Guide To The Appliance
Guide to the appliance... -
Page 13: Guide To The Appliance
Guide to the appliance a Position when switched off f Sensor for the feature lighting b Position when switched on g Sensor for hob lighting Canopy and slats open This sensor switches the hob lighting c Position for maintenance on and off, and is also a dimmer switch. Position for cleaning inside the cooker h Sensor for switching the fan on hood, for removing the grease filters... -
Page 14: Miele|Home
Miele service technician or suitably (Powerline) c. qualified electrician. Communication module XKM 2000 DA ..M.-Nr. 7 209 000 Control cabling set DA 6000 W ..M.-Nr. 7 707 980... -
Page 15: Operation
Operation If the On/Off sensor s is touched whilst Hinged canopy the canopy is opening, the canopy The cooker hood is operated by stops. opening the hinged canopy. If the On/Off sensor s is touched It opens by touching the On/Off again, the canopy shuts again. -
Page 16: Run-On Option "5M15
Operation Run-on option "5m15" Automatic switch-off of the Intensive setting It is advisable to leave the fan running for a few minutes after cooking has You can set the Intensive setting so that it always only runs for 10 minutes finished to neutralise any lingering before reverting automatically to level 3. -
Page 17: To Switch The Fan Off S
Operation To switch the fan off s Hob lighting n ^ Touch the On/Off sensor s to switch The hob lighting can be switched on the fan off. and off independently of the fan. The canopy and the slats will close. To switch the hob lighting on If the On/Off sensor s is touched whilst ^ Touch the Hob lighting sensor n... -
Page 18: Feature Lighting ]
Operation Operating hours counter l To switch the hob lighting off ^ Touch the Hob lighting sensor n The number of hours the appliance has briefly. The canopy will remain open. been in operation is stored in memory. ^ The light will also switch off if the The operating hours counter tells you canopy is closed by touching the when the grease filters need to be... - Page 19 Operation Reading the grease filter operating Altering the grease filter operating hours counter hours counter To check the percentage of time set You can set the operating hours already used counter to suit the type of cooking you ^ Press the On/Off sensor s to switch the fan on.
-
Page 20: Sensor Tones
Operation ^ Touch the 1 sensor to select a shorter Sensor tones time and the 4 sensor to select a When selecting a function with the longer time, until the time required sensors, an audible tone will sound has been set. briefly to confirm. -
Page 21: For Your Safety
Operation For your safety Safety switch-off for the glass slats The glass slats are spring loaded. They Safety switch-off for the canopy yield if they are blocked by somone's fingers or another object. If the canopy is prevented from closing dai2517 by someone's hand or an object The extendable slats also have a... -
Page 22: Problem
Operation Problem Safety switch-off after 10 hours If the canopy stops whilst it is being Should the cooker hood be left on, the opened or closed and you hear a long fan will switch off automatically after 10 tone sounding 4 times, this means that hours. -
Page 23: Cleaning And Care
Cleaning and care A range of Miele branded cleaning and cleaning agents. These will damage care products are available to order via the surface material. the internet on www.miele-shop.com. Important for appliances with Halogen lamps get very hot stainless steel surfaces... -
Page 24: Position For Maintenance
Cleaning and care Position for maintenance The canopy a hinges downwards The housing can be opened to clean whilst the filter housing b hinges inside the cooker hood, remove the grease filters and to change the lamps. upwards. The fan and the hob lighting switch off To open the housing and cannot be switched on again whilst ^ Switch the cooker hood on by... -
Page 25: To Close The Housing
Cleaning and care Grease filters To close the housing The grease filters should be cleaned regularly (at least every 3-4 weeks) to avoid a build-up of grease. They should be cleaned immediately if the l sensor lights up. An oversaturated filter is a fire hazard. -
Page 26: Resetting The Grease Filter Operating Hours Counter
4 required. ^ Do not wash at more than 65° C. If a Resetting the grease filter operating Miele dishwasher is being used, hours counter select the Sensor wash programme. ^ Use a mild dishwasher detergent. -
Page 27: Cleaning And Care
Safety Instructions"). Halogen lamps required: 20 W with G 4 connector and side reflector, (can be purchased from Miele). It is important that the halogen lamps have a side reflector. Fit the lamps so that the light is directed through the gap between the first and second glass slats. -
Page 28: After Sales Service
For information on the appliance under guarantee, please contact: guarantee specific to your country – your Miele Dealer please contact Miele. See back cover for contact details. In the U.K. your appliance is – the Miele Customer Contact Centre guaranteed for 2 years from the date of (see back cover for address). -
Page 29: Installation
Installation Before installation it is important to read the information given on the following pages as well as the "Warning and safety" instructions at the beginning of this book. Installation diagram See enclosed Installation diagram for instructions on how to install this appliance. -
Page 30: Appliance Dimensions
Appliance dimensions DER 6000 DA 6000 W 42° S > 350 >120 > 410 max. 20 mm... -
Page 31: Safety Distance Between Hob And Cooker Hood (S)
Appliance dimensions Safety distance between hob and cooker hood (S) The safety distance between the top of a cooker or hob and the bottom of the cooker hood canopy must measure at least 350 mm, unless a greater distance is specified by the manufacturer of your cooking appliance. -
Page 32: Connection For Air Extraction
Connection for air extraction Important: To avoid the danger If the exhaust ducting is secured to of toxic fumes, please observe the the exhaust stub by a hose clip, Warning and Safety instructions. ensure that it is fitted correctly. Do This is especially crucial when using not overtighten. -
Page 33: Condensate Trap
Connection for air extraction Important: If the exhaust ducting is to run through rooms, ceiling space etc. where there may be great variations in temperature between the different areas, the problem of condensation will need to be addressed. The exhaust ducting will need to be suitably insulated. -
Page 34: Electrical Connection
Electrical connection If the switch is not accessible after All electrical work should be installation (depending on country), an undertaken by a suitably qualified additional means of disconnection must and competent person in strict be provided for all poles. accordance with current national For extra safety it is advisable to protect and local safety regulations the appliance with a suitable residual... -
Page 35: Operation With Control Module Dsm 400
Operation with Control module DSM 400 The Miele DSM 400 control module can Installation be used to combine the cooker hood The control module is fitted to the with other components. cooker hood in the area of the fan and... -
Page 36: Technical Data
Technical data Total connected load..504 W – Fan motor ....290 W – Canopy mechanism ..120 + 4 W –... - Page 40 Alteration rights reserved / 3011 M.-Nr. 09 204 950 / 00...