Getting Familiar With Your Phone; Setting Up Your Phone - Cisco SPA303 Setup And Troubleshooting Manual

Hide thumbs Also See for SPA303:

Table of Contents

Phone.com Setup and Troubleshooting Guide

Cisco SPA303 IP Phone

Welcome!

This guide contains instructions to help you set up and use your

Cisco® SPA303 IP Phone. It describes some of the features your

phone and your Phone.com® service provide, so you can take

advantage of what the two together have to offer you. The guide

also provides insight into common network problems and how to

troubleshoot them.

Expect to spend about 15 minutes getting your SPA303 set up and

ready to use. Once it's set up, your phone will work in nearly the

same way as your typical office phone. Some familiarity with

networking may be required, especially if you have to change your

network's configuration or settings.

If you need additional help after reviewing this guide, check out the

Additional Service and Support

section at the end of this guide.

You'll find multiple means of contacting us there.

Getting Familiar With Your Phone

Thoroughly review Cisco's Quick Start Guide to get familiar with the

features and functions of the SPA303. The guide is included in the

box, and is also available on the web

(www.cisco.com/en/US/docs/voice_ip_comm/csbpipp

/ip_phones/quick_start/guide/spa_300_quick_start.pdf).

Before your SPA303 was shipped it was tested with a Phone.com

account to make sure it was working properly. Many configuration

parameters are set by Phone.com so you don't have to.

Revised: May 28, 2014

Page 2 of 11

Table of Contents

Show Quick Links

Table of Contents