D-Link Dap-15 User Manual - D-Link DAP-1522 Xtreme N Duo User Manual

Wireless bridge

Hide thumbs Also See for DAP-1522 Xtreme N Duo:

User manual (108 pages)

Quick installation manual (65 pages)

Configuration (4 pages)

Table Of Contents

Table of Contents

Section 3 - Configuration

Enable Auto

The Auto Channel Scan setting can be selected to allow the DAP-15 to choose the channel with the least amount of interference.

Channel Scan:

Wireless Channel:

Indicates the channel setting for the DAP-15. The Channel can be changed to fit the channel setting for an existing wireless network

or to customize the wireless network. If you enable Auto Channel Scan, this option will be grayed out.

Transmission Rate:

Select the transmit rate. It is strongly suggested to select Best (automatic) for best performance.

Channel Width:

Select the Channel Width:

Auto 0/40 - Select if you are using both 80.11n and non-80.11n wireless devices.

0MHz - Select if you are not using any 80.11n wireless clients.

Visibility Status:

Select Invisible if you do not want the SSID of your wireless network to be broadcasted by the DAP-15. If Invisible is selected, the

SSID of the DAP-15 will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DAP-15 in

order to connect to it.

Security Mode:

Refer to page 63 for more information regarding the wireless security.

Enable:

Enable the Wi-Fi Protected Setup feature.

Lock Wireless

Locking the wireless security settings prevents the settings from being changed by any new external registar using its PIN.

Security Settings:

Devices can still be added to the wireless network using Wi-Fi Protected Setup. It is still possible to change wireless network

settings with Manual Wireless Network Setup, Wireless Network Setup Wizard, or an existing external WLAN Manager

Registar.

Current PIN:

Shows the current value of the access point's PIN.

Generate New

Create a random number that is a valid PIN. This becomes the access point's PIN. You can then copy this PIN to the user

PIN:

interface of the registrar.

Reset PIN to

Restore the default PIN of the access point.

Default:

Reset to

Resets Wi-Fi Protected Status to Not Configured. Vista WPS icon will only be displayed when the Wi-Fi Protected Status is

Unconfigured:

Not Configured.