Network Setup - Cisco 6921 Administration Manual
Administration guide for cisco unified communications manager 8.6 (sccp and sip)
Hide thumbs
Also See for 6921:
- Administration manual (186 pages) ,
- User manual (124 pages) ,
- Features (29 pages)
Table of Contents
Advertisement
Network Setup
Table 8-1
Item
Boot Load ID
Hardware
Revision
Serial Number
Model Number
Message Waiting Indicates if there is a voice message waiting on the primary line for this phone.
UDI
Time
Time Zone
Date
FIPS Mode
Enabled
Network Setup
The Network Setup on a phone's web page displays network setup information and information about
other phone settings.
You can view and set many of these items from the Network Setup Menu and the Phone Information
Menu on the Cisco Unified IP Phone. For more information, see
Cisco Unified IP Phone."
To display the Network Setup area, access the web page for the phone as described in the
the Web Page for a Phone" section on page
Table 8-2
Network Setup Area Items
Item
DHCP Server
MAC Address
Host Name
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
8-4
Device Information Area Items (continued)
Description
Identifier of the factory-installed load running on the phone
Revision value of the phone hardware
Unique serial number of the phone
Model number of the phone
Displays the following Cisco Unique Device Identifier (UDI) information about
the phone:
Device Type—Indicates hardware type. For example, phone displays for all
•
phone models
Device Description—Displays the name of the phone associated with the
•
indicated model type
•
Product Identifier—Specifies the phone model
Version Identifier—Represents the hardware version of the phone
•
Serial Number—Displays the unique serial number of the phone.
•
Time obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Time zone obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Date obtained from the Date/Time Group in Cisco Unified Communications
Manager to which the phone belongs
Indicates whether the FIPS Mode parameter is enabled.
Table 8-2
describes these items.
Description
IP address of the Dynamic Host Configuration Protocol (DHCP) server from which the phone
obtains its IP address.
Media Access Control (MAC) address of the phone.
Host name that the DHCP server assigned to the phone.
Chapter 4, "Configuring Settings on the
8-2, and then click the Network Setup hyperlink.
Chapter
"Accessing
OL-24567-01
- Quick Links:
- Configuring Telephony Features
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
