Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Zanussi ZWS 181
Summary of Contents for Zanussi ZWS 181
- Page 1 User manual Washing Machine ZWS 181...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8 Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Before first use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9 Technical information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3... -
Page 3: Environment Concerns
• Do not replace or change the mains cable. Contact the Water connection service centre. • Do not connect the appliance with old hoses already • Make sure not to cause damage to the mains plug and used. Only use new hoses. cable. -
Page 4: Product Description
Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 10 bar (1 MPa) Cold water Water supply Maximum load Cotton 5 kg Spin speed Maximum 800 rpm 1) Connect the water inlet hose to a water tap with a 3/4'' thread. Product description Worktop Feet for the appliance level... -
Page 5: Control Panel
Control panel Programme knob Extra rinse button Start button Prewash button Easy iron button Use this function for persons allergic to detergents and in Programme knob areas where the water is soft. Turn this knob to set a programme. Prewash button Start button Press this button to add a prewash phase at 40°... -
Page 6: Programmes
Programmes Programme Type of load and soil Programme Possible Temperature Weight of load phases functions White cotton with heavy soil. This pro- Wash grammes add also the phase of hygiene Rinses Cottons to the laundry. Spin phase at the maxi- 90°... - Page 7 Programme Type of load and soil Programme Possible Temperature Weight of load phases functions Quick wash of cotton, synthetic, delicate Wash or mixed fabric items with light level of Rinses Quick wash soil or worn once. Spin phase at the maxi- 35°...
-
Page 8: Hints And Tips
Hints and tips The laundry load Detergents and additives • Divide the laundry in: white, coloured, synthetics, deli- • Only use detergents and additives specially made for cates and wool. washing machines. • Obey the washing instructions that are on the laundry •... -
Page 9: Before First Use
Before first use To activate the drain system, put 2 litre of water in start a programme for cotton at the highest tempera- the main wash compartment of the detergent dis- ture without laundry. This removes all possible dirt penser. from the drum and the tub. - Page 10 Open the door Using the liquid detergent While a programme operates, the appliance door is • Pull out the detergent locked. dispenser until it stops. To open the appliance door: • Pull out the detergent Turn the programme knob to to deactivate the divider from its posi- appliance.
-
Page 11: Care And Cleaning
Turn the programme knob to to deactivate the appliance. Care and cleaning Door seal Warning! Disconnect the appliance from the mains supply before Regularly examine the seal you clean it. and remove all objects External cleaning from the inner part. Clean the appliance only with soap and warm water. - Page 12 Drain pump Remove fluff and ob- Regularly examine the drain pump and make sure jects from the pump. that it is clean. Clean the pump if: • The appliance does not drain the water. • The drum cannot turn. • The appliance makes an unusual noise because of the blockage of the drain pump.
-
Page 13: Troubleshooting
Put 2 litres of water in the main wash compartment • Clean the filter in the valve with a stiff brush or a of the detergent dispenser. towel. Start the programme to drain the water. Frost precautions If the appliance is installed in an area where the tempera- ture can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. - Page 14 Problem Possible cause Possible solution The water inlet hose is damaged. Make sure that the water inlet hose has no dam- ages. The filter in the water inlet hose is Clean the filter. Refer to 'Care and cleaning'. blocked . The water tap is blocked or there is Clean the water tap.
-
Page 15: Installation
Problem Possible cause Possible solution The appliance fills with wa- The end of the drain hose is too low. Make sure that the drain hose is in the correct ter and drain immediately. position. Refer to 'Installation'. The washing results are not The detergent you used was not suf- Increase the detergent quantity or use a different satisfactory. - Page 16 Remove the polystyrene packaging materials. Open the door and remove all the items from the drum. Put the front piece on the floor behind the appli- ance. Carefully put down the appliance with the rear side on it. Make sure not to damage the ho- ses.
- Page 17 Remove the polystyrene protection from the bot- Remove the four bolts with a key. Pull out the tom. plastic spacers. Remove the power supply cable and the drain hose from the hose holders. Install the plastic cover (A), removed from the top of the packaging, to the bottom of the appliance.
- Page 18 Positioning and levelling The inlet hose • Install the appliance on a flat hard floor. • Make sure that carpets do not stop the air circulation below the appliance. • Make sure that the appliance does not touch the wall or other units •...
- Page 19 Without the plastic hose guide • On the edge of a sink. Make sure that the plastic guide cannot move when • To a sink spigot. the appliance drains. Attach the guide to the water Refer to the illustration. Put the drain hose in the tap or the wall.
- Page 20 www.zanussi.com/shop...