Contents Thank you for purchasing this PIONEER product. Please read through this manual before using the product for the first time, to en- sure proper use. After reading, please keep the manual in a safe and accessible place for future reference.
Page 3
Contents – Recalling equalizer curves 25 – Advanced operations 33 – Adjusting equalizer curves 26 Available accessories – Fine-adjusting equalizer curve 26 Playing songs on iPod 34 Adjusting loudness 27 – Basic operation 34 Using subwoofer output 27 – Displaying text information on –...
Page 4
Contents – Making a call by entering phone – Storing and recalling broadcast number 42 stations 51 – Clearing memory 42 – Storing the strongest broadcast – Setting automatic rejecting 43 stations sequentially 51 – Setting automatic answering 43 Additional Information –...
Section Before You Start Information to User Also, damage to this unit, smoke, and over- heating could result from contact with liquids. ! Keep this manual handy as a reference for op- Alteration or modifications carried out without erating procedures and precautions. appropriate authorization may invalidate the ! Always keep the volume low enough so that user’s right to operate the equipment.
Page 6
! When using an iPod, iPod Dock Connector to USB Cable is required. iPod ! Pioneer CD-IU50 interface cable is also available. For details, consult your dealer. ! This unit can control previous generations iPod models with a Pioneer iPod adapter (e.g.
Section Before You Start The SAT RADIO READY mark indicates that U.S.A. the Satellite Radio Tuner for Pioneer (i.e., XM Pioneer Electronics (USA) Inc. tuner and Sirius satellite tuner which are sold CUSTOMER SUPPORT DIVISION separately) can be controlled by this unit.
Section Before You Start ! If the front panel is not detached from the head unit within five seconds of turning off the ignition, a warning tone sounds. ! You can turn off the warning tone. See Switching the warning tone on page 29. Important About the demo mode ! Handle gently when removing or attaching...
Section Before You Start WARNING Keep the battery out of the reach of children. Should the battery be swallowed, consult a doc- tor immediately. CAUTION ! Use one CR2025 (3 V) lithium battery. ! Remove the battery if the remote control is not used for a month or longer.
Section Operating this unit 6 EJECT button What’s what Press to eject a disc. 7 DETACH button Head unit Press to remove the front panel from the 1 LIST button head unit. Press to display the disc title list, track title 8 AUX input jack (3.5 mm stereo jack) list, folder list, file list or preset channel list depending on the source.
Section Operating this unit k FUNCTION button Press to select functions. l LIST/ENTER button Press to display the disc title list, track title list, folder list, file list or preset channel list depending on the source. While in the operating menu, press to con- trol functions.
Section Operating this unit (song) indicator Basic Operations Appears when the track (song) name is dis- Power ON/OFF played on the main display section. Appears when song search refinement on Turning the unit on the iPod browsing function is in use. % Press SOURCE to turn the unit on.
# Band can be selected from among FM1, FM2, stop charging. FM3 or AM. ! External unit refers to a Pioneer product (such % Manual tuning (step by step) as ones available in the future) that, although incompatible as a source, enables control of Push MULTI-CONTROL left or right.
Section Operating this unit % Press LOCAL repeatedly to select the Introduction to advanced desired setting. operations FM: OFF—LEVEL 1—LEVEL 2—LEVEL 3— Press MULTI-CONTROL to display the LEVEL 4 main menu. AM: OFF—LEVEL 1—LEVEL 2 The LEVEL 4 setting allows reception of only Use MULTI-CONTROL to select the strongest stations, while lower settings let FUNCTION.
Section Operating this unit % Switch between compressed audio and Built-in CD Player CD-DA Basic Operations Press BAND/ESC. # This operation is available only when playing The built-in CD player can play back audio CD CD-EXTRA or MIXED-MODE CDs. (CD-DA) and compressed audio (WMA/MP3/ # If you have switched between compressed AAC/WAV) recorded on CD-ROM.
Section Operating this unit For CD TEXT discs Press LIST to switch to the track title list Play time—disc title—disc artist name—track mode. title—track artist name Use MULTI-CONTROL to select the de- For WMA/MP3/AAC sired track title. Play time—folder name—file name—track Turn to change the track title.
Section Operating this unit # If you do not operate the list within about 30 # If you select another folder during repeat play, seconds, the display automatically returns to the the repeat play range changes to disc repeat. # Performing track search or fast forward/re- ordinary display.
Section Operating this unit Pausing playback Turn MULTI-CONTROL to select a letter of the alphabet. % Press e (pause) on the remote control # You can also perform the same operations by to turn pause on. pushing MULTI-CONTROL up or down. Playback of the current track pauses.
Section Operating this unit Playing songs on USB portable Displaying text information of an audio file audio player/USB memory % Press DISP to select the desired text in- For details about the supported device, refer to formation. Portable audio player compatibility on page 6. For WMA/MP3/AAC Play time—folder name—file name—track Basic Operations...
Page 20
Section Operating this unit ! If you perform track search or fast forward/re- Turn MULTI-CONTROL to select the function. verse during TRACK, the repeat play range REPEAT (repeat play)—RANDOM (random changes to FOLDER. ! When FOLDER is selected, it is not possible to play)—SCAN (scan play)—PAUSE (pause)—...
MULTI-CONTROL up or down. ! Read the precautions for iPod on page 56. # You can also select the category by pushing ! While iPod is connected to this unit, PIONEER MULTI-CONTROL right. # To return to the previous list, push (check mark)) is displayed on the iPod.
Section Operating this unit Notes Function name Operation ! You can scroll the text information to the left Refer to Selecting a repeat play range on page 17. by pressing and holding DISP. However, the repeat play ! When Ever Scroll is set to ON at the initial set- ranges you can select are dif- ting, text information scrolls continuously in ferent from that of the built-in...
Section Operating this unit ! ALBUMS – Play back songs from a ran- — iPod nano first generation — iPod fifth generation domly selected album in order. ! OFF – Cancel random play. This unit’s iPod function can be operated from your iPod.
Page 24
Section Operating this unit Use MULTI-CONTROL to select AUDIOBOOKS SPEED in the function menu. Press MULTI-CONTROL to display the setting mode. Use MULTI-CONTROL to select the de- sired setting. Turn to change the setting. ! FASTER – Playback faster than normal speed ! NORMAL –...
Section Audio Adjustments Introduction of audio Using balance adjustment adjustments You can change the fader/balance setting so that it can provide the ideal listening environ- Press MULTI-CONTROL to display the ment in all occupied seats. main menu. Use MULTI-CONTROL to select Use MULTI-CONTROL to select AUDIO.
Section Audio Adjustments Turn MULTI-CONTROL to adjust the Display Equalizer curve level of the equalization band. POWERFUL Powerful +6 to –6 is displayed as the level is increased or decreased. NATURAL Natural # You can also perform the same operations by VOCAL Vocal pushing MULTI-CONTROL up or down.
Section Audio Adjustments Adjusting loudness Adjusting subwoofer settings When the subwoofer output is on, you can ad- Loudness compensates for deficiencies in the just the cut-off frequency and the output level low- and high-sound ranges at low volume. of the subwoofer. ! When the subwoofer output is on, you can Use MULTI-CONTROL to select LOUDNESS in the audio function menu.
Section Audio Adjustments Using the high pass filter dical changes in volume when switching be- tween sources. When you do not want low sounds from the ! Settings are based on the FM volume level, subwoofer output frequency range to play which remains unchanged.
Section Initial Settings Adjusting initial settings Turn MULTI-CONTROL to put a clock right. Press SOURCE and hold until the unit # You can also perform the same operations by turns off. pushing MULTI-CONTROL up or down. Press MULTI-CONTROL and hold until CLOCK SET appears in the display.
Section Initial Settings Press MULTI-CONTROL to turn dimmer Switching the feature demo The feature demo automatically starts when # To turn dimmer off, press MULTI-CONTROL power to this unit is turned off while the igni- again. tion switch is set to ACC or ON. Use MULTI-CONTROL to select DEMO.
Section Initial Settings Press MULTI-CONTROL to turn the Displaying system version of BT AUDIO source on. Bluetooth adapter for repair # To turn the BT AUDIO source off, press Should this unit connecting Bluetooth adapter MULTI-CONTROL again. fails to operate properly and you consult your dealer for repair, you may be asked to indicate the system version and Bluetooth module ver- Entering PIN code for...
Section Other Functions Using the AUX source Selecting AUX as the source % Press SOURCE to select AUX as the Up to two auxiliary devices such as VCR or source. portable devices (sold separately) can be con- # If the auxiliary setting is not turned on, AUX nected to this unit.
Using the external unit Use MULTI-CONTROL to select 1 KEY to 6 KEY. External unit refers to a Pioneer product (such Turn to change 1 KEY to 6 KEY and press. as ones available in the future) that, although incompatible as a source, enables control of Advanced operations basic functions with this unit.
Turn to change the menu option. Press to se- ! Read the precautions for iPod on page 56. lect. ! While iPod is connected to this unit, PIONEER (check mark)) is displayed on the iPod. Turn MULTI-CONTROL to select the ! If an error message such as ERROR-11 is dis- function.
Section Available accessories ! While you are listening to songs on your Blue- Playing songs in a random tooth audio player, refrain from using on your order (shuffle) cellular phone as much as possible. If you use % Press repeatedly to select the de- your cellular phone, the signal from your cel- sired setting.
Section Available accessories Turn MULTI-CONTROL to select the Press MULTI-CONTROL to open the con- function. nection. CONNECTION OPEN (connection open)— ALWAYS WAITING is displayed. This unit is DISCONNECT AUDIO (disconnect audio)— now on standby for connection from Bluetooth PLAY (Play)—STOP (Stop)—PAUSE (pause)— audio player.
Section Available accessories Displaying BD (Bluetooth Setting up for hands-free phoning Device) address Before you can use the hands-free phoning function you must set up the unit for use with Use MULTI-CONTROL to select your cellular phone. This entails establishing a DEVICE INFO in the function menu.
Section Available accessories % End all calls Making a phone call Push MULTI-CONTROL down. Voice recognition % Switch between callers on hold Press BAND/ESC and hold until Press MULTI-CONTROL. VOICE DIAL appears in the display. # You can also perform this operation by push- VOICE DIAL appears in the display.
Notes complete the connection, check the device ! You can also select the function by pressing name (PIONEER BT UNIT) and enter the link FUNCTION on the remote control. code on your cellular phone. If the connection ! To return to the previous display, press BACK.
Section Available accessories Disconnecting a cellular phone Deleting a registered phone Use MULTI-CONTROL to select Use MULTI-CONTROL to select DISCONNECT PHONE in the function menu. DELETE PHONE in the function menu. Device name of the connected phone appears Press MULTI-CONTROL to display the in the display.
Section Available accessories # You can also perform the same operations by # The display indicates how many entries have pushing MULTI-CONTROL up or down. been transferred and the total number to be # If the assignment is empty, NO DATA is dis- transferred.
Section Available accessories Using the call history Press MULTI-CONTROL to display the number input screen. Important Turn MULTI-CONTROL to select a num- Be sure to park your vehicle and apply the park- ber. ing brake when performing this operation. # You can also perform the same operations by pushing MULTI-CONTROL up or down.
Section Available accessories Press MULTI-CONTROL to clear the XM tuner memory. Listening to XM Satellite Radio While clearing, CLEARING is displayed. After the data on the selected item is cleared, You can use this unit to control an XM satellite CLEARED is displayed.
Section Available accessories Use MULTI-CONTROL to store the se- Selecting a channel in the channel lected station in memory. category Turn to change the preset number. Press and Select the channel select settings to hold to store. MODE CATEGORY. The XM preset number you have selected will Refer to Switching the XM channel select mode flash and then remain lit.
Section Available accessories % Select a channel. # You can also change the station by pushing Push MULTI-CONTROL left or right. MULTI-CONTROL up or down. # If you push and hold MULTI-CONTROL left or # If you do not operate the list within about 30 seconds, the display is automatically returned to right, you can increase or decrease channel num- the ordinary display.
Section Available accessories Selecting the SIRIUS channel Press MULTI-CONTROL to display the setting mode. select mode You have two methods for selecting a channel: Press MULTI-CONTROL to select a de- by number and by category. When selecting sired league. by number, channels in any category can be Turn MULTI-CONTROL to select a de- selected.
Section Available accessories ! If you do not operate the function within Multi-CD Player about 10 seconds, the display is automati- Basic Operations cally returned. You can use this unit to control a multi-CD player, which is sold separately. Displaying game information ! Only functions described in this manual are If games of your selected teams are currently supported by 50-disc multi-CD players.
Section Available accessories Press MULTI-CONTROL to display the Refer to Pausing playback on page PAUSE main menu. Refer to Entering disc titles on Use MULTI-CONTROL to select TITLE INPUT page 18. FUNCTION. Turn to change the menu option. Press to se- lect.
Section Available accessories Using ITS playlists Select the repeat range. ITS (instant track selection) lets you make a Use MULTI-CONTROL to select ITS PLAY playlist of favorite tracks from the multi-CD in the function menu. player magazine. After you have added your fa- vorite tracks to the playlist, you can turn on ITS Press MULTI-CONTROL to turn ITS play play and play just those selections.
Section Available accessories # If there are no tracks from your playlist in the ! After data for 100 discs is stored in mem- current range, EMPTY is displayed and normal ory, data for a new disc will overwrite the playback resumes.
Section Available accessories TV tuner Use MULTI-CONTROL to select the de- sired station. Basic Operations Turn to change the station. Press to select. # You can also change the station by pushing You can use this unit to control a TV tuner, MULTI-CONTROL up or down.
TRK SKIPPED USB portable When you contact your dealer or your nearest audio player/ Windows Media Pioneer Service Center, be sure to have the USB memory DRM 9/10. contains WMA error message recorded. files that are pro-...
Appendix Additional Information Communication Perform one of the iPod is not Check if the con- charged but op- nection cable for ERROR-19 failure following opera- ERROR-A1 tions. CHECK USB erates correctly iPod shorted out –Turn the ignition (e.g., not caught in switch OFF and metal objects).
Appendix Additional Information ! Store discs in their cases when not in use. Compressed audio ! Avoid leaving discs in excessively hot envir- compatibility onments including under direct sunlight. ! Do not attach labels, write on or apply che- ! Compatible format: WMA encoded by micals to the surface of the discs.
Appendix Additional Information ! Firmly secure the USB portable audio USB audio player/USB memory player/USB memory when driving. Do not USB audio player/USB memory let the USB portable audio player/USB compatibility memory fall onto the floor, where it may be- come jammed under the brake or accelera- ! USB version: 2.0, 1.1 and 1.0 tor pedal.
! For details, refer to the iPod’s manuals. About iPod settings ! You cannot operate the iPod Equalizer on Pioneer products. We recommend that you set the iPod Equalizer to off, before con- Level 1 Level 2 Level 3 Level 4 necting to this unit.
Appendix Additional Information ! Regardless of the length of blank section between the songs of original recording, compressed audio discs play with a short pause between songs. ! File extensions such as .wma, .mp3, .m4a or .wav must be used properly. Example of a hierarchy : Folder : Compressed audio file...
Appendix Additional Information Slope ........–18 dB/oct Specifications Gain ........+6 dB to –24 dB General Phase ........Normal/Reverse Bass boost: Power source ......14.4 V DC (10.8 V to 15.1 V Gain ........+12 dB to 0 dB allowable) Grounding system ....
Page 59
Appendix Additional Information CEA2006 Specifications Power output ......14 W RMS × 4 Channels (4 W and ≦ 1 % THD+N) S/N ratio ........91 dBA (reference: 1 W into 4 W) Note Specifications and the design are subject to mod- ifications without notice due to improvements.
Page 60
TEL: (03) 9586-6300 PIONEER ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R 0P2, Canada TEL: 1-877-283-5901 TEL: 905-479-4411 PIONEER ELECTRONICS DE MEXICO, S.A. de C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 先鋒股份有限公司...
Page 61
CD RECEIVER AUTORADIO CD RADIO CD DEH-P410UB Installation Manual Manuel d’installation Manual de instalación Printed in China Imprimé en Chine <YRD5263-A/S> UC <KNANX> <08H00000>...
Connecting the units English • Control signal is output through blue/white cable Note when this unit is powered on. Connect it to an external power amp’s system remote control or • When this unit is installed in a vehicle without the vehicle’s auto-antenna relay control terminal ACC (accessory) position on the ignition switch, (max.
Installation English 2. Secure the mounting sleeve by Note using a screwdriver to bend the • Check all connections and systems before final metal tabs (90°) into place. installation. Mounting sleeve • Do not use unauthorized parts. The use of Dashboard unauthorized parts may cause malfunctions.
Installation English 2. Insert the supplied extraction keys 3. Tighten two screws on each side. into both sides of the unit until • Use either truss screws (5 mm × 8 mm) or flush surface screws (5 mm × 9 mm), they click into place.
Connecting the units English Connection Diagram 36. Power amp (sold separately) 37. Blue/white When not connecting a rear speak- Connect to system control terminal of the er lead to a Subwoofer (Fig. 1) power amp or auto-antenna relay control terminal (max. 300 mA 12 V DC). When using a Subwoofer without 38.
Page 66
When not connecting a rear speaker lead to a subwoofer 1.5 m (4 ft. 9 in.) 20 cm 50 cm (20 in.) (7-7/8 in.) 1. USB cable 36. Power amp Connect to separately sold USB device. (sold separately) 2. This product 3.
Page 67
When using a subwoofer without using the optional amplifier 50 cm (20 in.) 1.5 m (4 ft. 9 in.) 20 cm (7-7/8 in.) 1. USB cable Connect to separately sold USB device. 3. Rear output 2. This product 4. iPod 10.