Pioneer Premier DEH-P410UB Installation Manual
Cd receiver
Hide thumbs
Also See for Premier DEH-P410UB:
- Operation manual (187 pages) ,
- Operation manual (71 pages) ,
- Service manual (75 pages)
Advertisement
CD RECEIVER
AUTORADIO CD
RADIO CD
DEH-P410UB
Installation Manual
Manuel d'installation
Manual de instalación
Printed in China
Imprimé en Chine
<YRD5263-A/S> UC
<KNANX> <08H00000>
Installation
English
2. Secure the mounting sleeve by
Note
using a screwdriver to bend the
• Check all connections and systems before final
metal tabs (90°) into place.
installation.
Mounting sleeve
• Do not use unauthorized parts. The use of
Dashboard
unauthorized parts may cause malfunctions.
• Consult with your dealer if installation requires
182
drilling of holes or other modifications of the
vehicle.
53
• Do not install this unit where:
— it may interfere with operation of the vehicle.
— it may cause injury to a passenger as a result
of a sudden stop.
• The semiconductor laser will be damaged if it
3. Install the unit.
overheats. Install this unit away from hot places
• Use commercially available parts when
such as near the heater outlet.
installing.
• Optimum performance is obtained when the unit
Nut
is installed at an angle of less than 60°.
Filrewall or
metal support
60°
Metal strap
Screw
DIN Front/Rear-mount
Screw (M4 8)
This unit can be properly installed either from
"Front" (conventional DIN Front-mount) or
"Rear" (DIN Rear-mount installation, utilizing
threaded screw holes at the sides of unit
chassis). For details, refer to the following
installation methods.
• Make sure that the unit is installed securely
in place. Unstable installation may cause this
DIN Front-mount
unit to malfunction, such as sound skip.
Removing the Unit
Installation with metal strap and
1. Extend top and bottom of the trim
screws
ring outwards to remove the trim
1. Insert the mounting sleeve into the
ring. When reattaching the trim
dashboard.
ring, push the trim ring onto the
• When installing in a shallow space, use a
unit until it clicks. (If the trim ring is
supplied mounting sleeve. If there is enough
space behind the unit, use factory supplied
attached upside down, the trim ring
mounting sleeve.
will not fit properly.)
• It becomes easy to remove the trim ring if the
front panel is released.
Trim ring
Installation
English
2. Insert the supplied extraction keys
3. Tighten two screws on each side.
• Use either truss screws (5 mm × 8 mm)
into both sides of the unit until
or flush surface screws (5 mm × 9 mm),
they click into place.
depending on the shape of screw holes in the
bracket.
Screw
Dashboard or Console
Factory radio mounting bracket
3. Pull the unit out of the dashboard.
Fastening the front panel
DIN Rear-mount
If you do not plan to detach the front panel,
1. Extend top and bottom of the trim
the front panel can be fastened with supplied
screw.
ring outwards to remove the trim
ring. When reattaching the trim ring,
push the trim ring onto the unit until
it clicks. (If the trim ring is attached
upside down, the trim ring will not
fit properly.)
Screw
• It becomes easy to remove the trim ring if the
front panel is released.
Trim ring
2. Determine the appropriate position
where the holes on the bracket and
the side of the unit match.
Advertisement
Table of Contents
Related Manuals for Pioneer Premier DEH-P410UB
Summary of Contents for Pioneer Premier DEH-P410UB
- Page 1 Installation Note • Check all connections and systems before final installation. CD RECEIVER • Do not use unauthorized parts. The use of unauthorized parts may cause malfunctions. AUTORADIO CD • Consult with your dealer if installation requires RADIO CD drilling of holes or other modifications of the vehicle.
-
Page 2: Installation
Installation Français Installation 2. Fixez le manchon de montage en Remarque utilisant un tournevis pour tordre • Vérifiez toutes les connexions et tous les systèmes les languettes de métal (90°). avant l’installation finale. Manchon de montage • N’utilisez aucune pièce non autorisée.L’utilisation Tableau de bord de pièces non autorisées peut causerun mauvais fonctionnement. -
Page 3: When Not Connecting A Rear Speaker Lead To A Subwoofer
When not connecting a rear speaker lead to a subwoofer 1.5 m (4 ft. 9 in.) 20 cm 50 cm (20 in.) (7-7/8 in.) 1. USB cable Connect to separately sold USB device. 2. This product 3. Rear output 32. To rear output 4. - Page 4 Connecting the units English Connecting the units • Control signal is output through blue/white cable Connection Diagram Note when this unit is powered on. Connect it to an external power amp’s system remote control or When not connecting a rear speak- •...
-
Page 5: Conexión De Las Unidades
Conexión de las unidades Español Conexión de las unidades • La señal de control se emite a través del cable Diagrama de conexión Nota azul/blanco cuando se enciende esta unidad. Conéctelo a un terminal de control de sistema de Cuando no se conecta un cable •...