Operation
3.
Push the power trim and tilt switch "
(down) to lower the outboard motor to
the desired position.
UP
DN
DN
DN
74
ZMU03644
"
EMU28062
EMU32851
Power trim and tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00260
NOTICE
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ZMU01936
ing can result.
EMU32913
Procedure for power trim and tilt models
1.
Place the remote control lever / gear
shift lever in neutral.
ZMU07921
Shallow water