2.
After stopping the engine, disconnect
the fuel hose from the fuel joint on the
outboard motor by turning it counter-
clockwise.
1
1. Fuel joint
2. Fuel hose
3.
Install the fuel joint cap on the outboard
motor.
1. Fuel joint cap
4.
Disconnect the fuel hose from the fuel
joint on the fuel tank by turning it coun-
terclockwise.
1. Fuel joint
2. Fuel hose
5.
Tighten the air vent screw by turning it
clockwise.
2
ZMU07458
1. Air vent screw
6.
Remove the key if the boat will be left un-
attended.
TIP:
1
The engine can also be stopped by pulling
the cord and removing the clip from the en-
gine shut-off switch, then turning the main
switch to "
ZMU07459
Operation
1
1
" (off).
2
ZMU07443
ZMU07444
69