Getting To Know The Cisco Rv180; Front Panel; Back Panel; Cisco Rv180/Rv180W Administration Guide - Cisco RV180 Administration Manual
Vpn router/wireless-n multifunction router
Hide thumbs
Also See for RV180:
- Administrator's manual (183 pages) ,
- Manual (14 pages) ,
- Datasheet (5 pages)
Table of Contents
Advertisement
Introduction
Getting to Know the Cisco RV180
Getting to Know the Cisco RV180
Cisco RV180/RV180W Administration Guide
Front Panel
POWER—The Power LED lights up green to indicate the device is powered on. It
flashes green when the power is coming on or software is being upgraded.
WAN LED—The WAN (Internet) LED lights up green when the device is connected
to your cable or DSL modem. The LED flashes green when the device is sending
or receiving data over the WAN port.
LAN—These four LEDs correspond to the four LAN (Ethernet) ports of the Cisco
RV180. If the LED is continuously lit green, the Cisco RV180 is connected to a
device through the corresponding port (1, 2, 3, or 4). The LED for a port flashes
green when the Cisco RV180 is actively sending or receiving data over that port.
Back Panel
RESET Button—The Reset button has two functions:
•
If the Cisco RV180 is having problems connecting to the Internet, press the
RESET button for less than five seconds with a paper clip or a pencil tip.
This is similar to pressing the reset button on your PC to reboot it.
•
If you are experiencing extreme problems with the Cisco RV180 and have
tried all other troubleshooting measures, press and hold in the RESET
1
4
- Quick Links:
- Product Overview
- Lan Ethernet Interfaces
Hide quick links:
Advertisement
Table of Contents
