Figure 48
Figure 49
Understanding External Antenna Deployments
All Cisco antenna connectors are labeled; "A," "B," "C," and so on. "A" has a higher priority than "B"
or "C/D" so, if the AP supports say 3 or 4 antennas and you only have 2 antennas, you can use them on
ports "A" and "B" for a short term until you install the additional antennas.
Radiation Patterns for the AP 1600i @ 2.4 GHz
Radiation Patterns for the AP 1600i @ 5 GHz
Cisco Aironet Series 2700/3700 Access Points Deployment Guide
Cisco Aironet Series 3700 Access Point
35