Power Settings; Internet Connection Type - Cisco SPA301 Administration Manual
Hide thumbs
Also See for SPA301:
- Setup and troubleshooting manual (8 pages) ,
- Datasheet (6 pages) ,
- Administration manual (332 pages)
Table of Contents
Advertisement
Cisco SPA IP Phone Field Reference
System Tab
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
Power Settings
Parameter
PoE Power Required
Internet Connection Type
Parameter
Connection Type
Use Backup IP
(Cisco SPA 30X and
Cisco SPA5XX only)
Description
Specifies the PoE power setting: Normal (default)
or Maximum.
When one or more attendant consoles are
attached to the phone, use Maximum to advertise
to a PoE switch that the phone will consume up to
12 watts.
When no attendant consoles are attached, use
Minimum to advertise a required power budget
of 6.5 watts.
This parameter is not applicable to Cisco SPA301
or SPA303 as they do not have Cisco Attendant
Console support.
Description
Choose the type of internet connection:
•
DHCP
•
Static IP
•
PPPoE (not applicable to
When this field is set to yes, the IP phone does not
renew its IP address when the DHCP server is not
reachable during the phone's startup sequence,
but uses the last-known IP address. If set to no,
the phone keeps retrying the DHCP server to
obtain a new IP address. This field is set to yes by
default.
A
Cisco WIP310
)
246
- Quick Links:
- Overview of the Phones
Hide quick links:
Advertisement
Table of Contents
