hit counter script
Toshiba Satellite P30 Maintenance Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite P30
  6. Maintenance manual
Toshiba Satellite P30 Maintenance Manual

Toshiba Satellite P30 Maintenance Manual

Toshiba personal computer
Hide thumbs Also See for Satellite P30:
Table of Contents

Advertisement

Quick Links

See also: User Manual
Toshiba Personal Computer
Satellite P30
Maintenance Manual
TOSHIBA CORPORATION

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite P30

Summary of Contents for Toshiba Satellite P30

  • Page 1 Toshiba Personal Computer Satellite P30 Maintenance Manual TOSHIBA CORPORATION...
  • Page 2 © 2004 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein.
  • Page 3 Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite SATELLITE P30, referred to as the P30 Series in this manual. The procedures described in this manual are intended to help service technicians isolate faulty Field Replaceable Units (FRUs) and replace them in the field.
  • Page 4 Chapter 4 Replacement Procedures describes the removal and replacement of the FRUs. Appendices The appendices describe the following: Handling the LCD module Board layout Pin assignments Keyboard scan/character codes Key layout Screw torque list Reliability Satellite P30 Maintenance Manual...
  • Page 5 Text that you are instructed to type in is shown in the boldface type below: DISKCOPY A: B: The display Text generated by the computer that appears on its display is presented in the type face below: Format complete System transferred Satellite P30 Maintenance Manual...
  • Page 6 Satellite P30 Maintenance Manual...

  • Page 7: Table Of Contents

    TouchPad Troubleshooting.................... 2-26 2.11 Speaker Troubleshooting ....................2-28 2.12 DVD-ROM and Multi-Drive Troubleshooting.............. 2-29 2.13 Modem Troubleshooting....................2-32 2.14 PCMCIA Troubleshooting..................... 2-34 2.15 IEEE 1394 Troubleshooting ..................2-36 2.16 Wireless LAN Troubleshooting..................2-38 2.17 Bluetooth Troubleshooting .................... 2-40 Satellite P30 Maintenance Manual...
  • Page 8 Keyboard Test ........................3-15 3.13 Mouse (Pad) Test ......................3-17 3.14 LCD Pixels Mode Test ....................3-19 3.15 Lid Switch Test ......................3-20 3.16 HDD R/W Test .......................3-21 3.17 LAN Test........................3-23 3.18 RTC Test ........................3-25 3.19 CD Control Button Test ....................3-26 viii Satellite P30 Maintenance Manual...
  • Page 9 Touch Pad ........................4-34 4.14 Speakers ......................... 4-36 4.15 System Board ......................... 4-37 4.16 Fan, Heat Sink, & CPU....................4-39 4.17 Display Mask ......................... 4-42 4.18 LCD Module ........................4-44 4.19 FL Inverter Board ......................4-47 Satellite P30 Maintenance Manual...
  • Page 10 Handling the LCD Module..................A-1 Appendix B Board Layout....................... B-1 Appendix C Pin Assignments ....................C-1 Appendix D Keyboard Scan/Character Codes.................D-1 Appendix E Key Layout ......................E-1 Appendix F Series Screw Torque List ..................F-1 Appendix G Reliability ......................G-1 Satellite P30 Maintenance Manual...
  • Page 11 Chapter 1 Hardware Overview...
  • Page 12 1 Hardware Overview 1-ii Satellite P30 Series Maintenance Manual...
  • Page 13 DVD-R/-RW Drive ................... 1-10 1.4.2 DVD-ROM Drive..................1-12 1.4.3 DVD+-R/DVD+-RW Drive ..............1-14 1.4.4 DVD Super Multi Drive................1-15 Power Supply ......................1-16 Batteries ........................1-18 1.6.1 Main Battery....................1-18 1.6.2 RTC battery ....................1-19 Satellite P30 Series Maintenance Manual 1-iii...
  • Page 14 1 Hardware Overview 1-iv Satellite P30 Series Maintenance Manual...

  • Page 15: Features

    1.1 Features 1 Hardware Overview Features The Satellite P30 Series Personal Computer uses extensive Large Scale Integration (LSI), and Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight and high reliability. This computer incorporates the following features and benefits: •...
  • Page 16 • 5.25’’ 12.7mm height DVD-ROM device Optional Devices • 128MB/256MB/512MB/1024MB SO-DIMM modules • MINI PCI module (802.11a+b+g Askey wireless LAN module/802.11b+g Askey wireless LAN module) • MDC Modem • Dual-Band build in Antenna for Wireless LAN Communication. Satellite P30 Series Maintenance Manual...
  • Page 17 • SM memory capacity support from 4MB to 128MB • MS memory capacity support from 8MB to 256MB • MS Pro memory capacity support from 256MB to 1GB • xD memory capacity support from 4MB to 512MB Satellite P30 Series Maintenance Manual...
  • Page 18 When system is off, pressing this button will turn on CD Playback mode. Pressing this button again will turn off CD Playback mode. When system is turned on, pressing this button will launch the program which you defined with Programmable Button utility.(The default setting is Windows Media Player) Satellite P30 Series Maintenance Manual...

  • Page 19: System Unit

    25MHZ to 112MHZ per channel. SMsC L PC 47N217 Super I/O with LPC Interface • PC99a, PC2001 • ACPI 2.0 Compli • Serial Ports • One Full Fun ction Serial Port Satellite P30 Series Maintenance Manual...
  • Page 20 Audio & WLP2.0 audio Requirements. • S/PDIF Digital Audio Output. • 3D Stereo Enhancement. • Support double sampling r ate (96KHz) of DVD audio playback. CB714 Card Bus Host Adapter • 3.3V operation with I/O 5V T olerance Satellite P30 Series Maintenance Manual...
  • Page 21 • Supports CLKRUN# protocol • Supports SUSPEND# • Supports PCI PME# fro m D3, D2, D1 and D0 • Supports PCI PME# from D3Cold • Supports Zoomed Video Port • Supports Parallel 4-wire Powe r Switch Interface Satellite P30 Series Maintenance Manual...
  • Page 22 1 Hardware Overview 1.2 System Unit Satellite P30 Series Maintenance Manual...

  • Page 23: Inch Hard Disk Drive

    The internal HDD is a random access non-volatile storage device. It has a non-removable 2.5- inch magnetic disk and mini-Winchester type magnetic heads. The computer supports a 30 / 40 / 60 / 80 / 100GB/120GB HDD. Satellite P30 Series Maintenance Manual...

  • Page 24: Removable Drives

    • DVD-ROM drive CD-RW/DVD-ROM drive • • DVD±R/±RW drive • DVD Super Multi ddrive 1.4.1 DVD-R/-RW Drive The DVD-R/-RW drive (Toshiba SD-R6112) accommodates either 12cm (4.72-inch) or 8cm (3.15-inch) CDs or DVDs. Read speeds DVD-ROM Maximum 8 times faster rotational speed DVD-RAM...
  • Page 25 DVD-RW DVD-R Applicable CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, CD-I, CD-I Bridge (Photo-CD, Video-CD) Multisession CD (Phto-CD, CD-EXTRA, CD-R, Read Disc: CD-RW, Portfolio), CD-R, CD-RW DVD-ROM [DVD-5, DVD-9, DVD-10, DVD-18] DVD-R DVD-RW DVD-RAM Satellite P30 Series Maintenance Manual 1-11...
  • Page 26 1 Hardware Overview 1.4 Removable Drives 1.4.2 DVD-ROM Drive The DVD-ROM drive (Toshiba SD-C2612 or Matsushita SR-8177) accommodates either 12cm (4.72-inch) or 8cm (3.15-inch) CDs or DVDs. Transfer rates Matsushita SR-8177: The DVD-ROM drive is able to read CD-ROM, CD-R data at 10.3X to 24X CAV mode speed and CD-RW data at 5.1X to 12X CAV mode speed.
  • Page 27 1.4 Removable Drives 1 Hardware Overview 1.4.3 CD-RW/DVD-ROM Drive The CD-RW/DVD-ROM combo drive (Toshiba SD-R2412 or TEAC DW-224E-85) is capable of driving either 12cm (4.72-inch) or 8cm (3.15-inch) DVDs and CDs without using an adaptor. Read speeds DVD-ROM Maximum 8 times faster rotational speed...

  • Page 28: Dvd-R/-Rw Drive

    1 Hardware Overview 1.5 Power Supply 1.4.4 DVD±R/±RW Drive The DVD±R/±RW drive (Toshiba SD-R2412 or TEAC DW-224E-85) is capable of driving either 12cm (4.72-inch) or 8cm (3.15-inch) DVDs and CDs without using an adaptor. Read speeds DVD-ROM Maximum 8 times faster rotational speed...

  • Page 29: Dvd Super Multi Drive

    1.5 Power Supply 1 Hardware Overview 1.4.5 DVD Super Multi Drive The DVD Super Multi Drive (Toshiba SD-R2412 or TEAC DW-224E-85) is capable of driving either 12cm (4.72-inch) or 8cm (3.15-inch) DVDs and CDs without using an adaptor. Read speeds...

  • Page 30: Power Supply

    The EC controls the following two kinds of LED DC IN LED (one color: green) • Green = indicates AC adaptor is connected Battery LED (two colors: orange and green) • Green solid = The battery is fully charged. 1-16 Satellite P30 Series Maintenance Manual...
  • Page 31 When a new battery is installed, the EC communicates with the E PROM in the battery to read information of the newly installed battery. 10. Battery capacity calculation The EC reads battery remaining and percentage capacity from the battery through SMBus. Satellite P30 Series Maintenance Manual 1-17...

  • Page 32: Batteries

    The times required for charges are listed in the table below. Status Charging time Normal charge (power on) 12 hours or longer Quick charge (power off) About 4 hours 1-18 Satellite P30 Series Maintenance Manual...

  • Page 33: Rtc Battery

    RTC battery. The RTC battery is charged by the adaptor or main battery, while the computer is powered on. Status Time Charging Time (power on) About 48 hours Data preservation period (full charge) 2 month Satellite P30 Series Maintenance Manual 1-19...
  • Page 34 1 Hardware Overview 1.6 Batteries 1-20 Satellite P30 Series Maintenance Manual...

  • Page 35: Troubleshooting Procedures

    Chapter 2 Troubleshooting Procedures Version 1.0 Aug. 13 2004 released...
  • Page 36 2 Troubleshooting Procedures 2-ii Satellite P30 Series Maintenance Manual...

  • Page 37: Troubleshooting Flowchart

    5 IN 1 Failure Troubleshooting................2-24 2.10 Touch Pad Troubleshooting..................2-26 2.11 Speaker Troubleshooting ..................2-28 2.12 DVD-ROM and Multi-Drive Troubleshooting............2-29 2.13 Modem Troubleshooting..................2-32 2.14 PCMCIA Troubleshooting..................2-34 2.15 IEEE1394 Troubleshooting………………………………………………………...2-36 2.16 Wireless LAN Troubleshooting................2-38 Satellite P30 Series Maintenance Manual 2-iii...
  • Page 38 Figure 2-12 Modem troubleshooting process ..............2-32 Figure 2-13 PCMCIA troubleshooting process..............2-34 Figure 2-14 IEEE 1394 troubleshooting process .............2-36 Figure 2-15 Wireless LAN troubleshooting process............2-38 Tables Table 2-1 Battery LED ....................2-8 Table 2-2 DC-IN LED ....................2-9 2-iv Satellite P30 Series Maintenance Manual...
  • Page 39 Use the flowchart in Figure 2-1 as a guide for determining which troubleshooting procedures to execute. Before going through the flowchart steps, verify the following: Ask the user if a password is registered and, if it is, ask him or her to enter the password. Satellite P30/P35 Series Maintenance Manual...
  • Page 40 2 Troubleshooting Procedures 2.3 Power Supply Troubleshooting Verify with the customer that Toshiba Windows XP is installed on the hard disk. Operating systems that were not preinstalled by Toshiba can cause the computer to malfunction. Make sure all optional equipment is removed from the computer.

  • Page 41: Figure 2-1 Troubleshooting Flowchart (1/2)

    Is T o sh ib a W in d o w s b e in g lo a d e d ? R u n C M 1 6 5 .E X E an d sele ct th e H A R D D IS K item . Y es Figure 2-1 Troubleshooting flowchart (1/2) Satellite P30/P35 Series Maintenance Manual...

  • Page 42: Figure 2-1 Troubleshooting Flowchart (2/2)

    After confirming which diagnostics test has detected Is an error detected by any of the an error, perform the diagnostics tests? appropriate procedure as outlined below. System is normal Figure 2-1 Troubleshooting flowchart (2/2) Satellite P30/P35 Series Maintenance Manual...
  • Page 43 7. If an error is detected by the modem test, perform the Modem Troubleshooting Procedures in Section 2.13. 8. If an error is detected by the Touch Pad test, perform the Touch Pad Troubleshooting procedures in Section 2.10. Satellite P30/P35 Series Maintenance Manual...
  • Page 44 6. If an error is detected when using the IEEE1394 device, perform the IEEE1394 device Troubleshooting procedures in Section 2.15. 7. If an error is detected when using the Wireless LAN, perform the Wireless LAN Troubleshooting procedures in Section 2.16. Satellite P30/P35 Series Maintenance Manual...

  • Page 45: Figure 2-2 Power Supply Troubleshooting Process

    (P rocedure 4) P erform internal connection A re the internal power check connections secure? (P rocedure 5) Y es R eplace system board E N D Figure 2-2 Power Supply Troubleshooting Process Satellite P30/P35 Series Maintenance Manual...

  • Page 46: Dc-In Led

    The system is (LED on for 1 second protected and cannot be re-powered on every 2 seconds) without the AC power connected. Amber color off Battery not in low or critical low state; It’s in discharging state Satellite P30/P35 Series Maintenance Manual...
  • Page 47 A faulty adaptor may not supply power or may not charge the battery. Perform Check 1. Check 1 Connect a new AC adaptor. If the problem is not resolved, go to Check 2. Check 2 Insert a new battery. If the problem is still not resolved, go to Procedure 3. Satellite P30/P35 Series Maintenance Manual...
  • Page 48 • If the battery LED does not light, go to Check 6. Check 6 Make sure the battery pack is installed in the computer correctly. If the battery is properly installed and the battery LED still does not light, go to Procedure 4. 2-10 Satellite P30/P35 Series Maintenance Manual...

  • Page 49: Procedure 5 Replacement Check

    Make sure that the battery cable is firmly connected to the system board. If it is connected firmly, go to Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite P30/P35 Series Maintenance Manual 2-11...

  • Page 50: Figure 2-3 Display Troubleshooting Process

    ( P r o c e d u r e 3 ) R e p la c e s y s te m b o a r d E N D Figure 2-3 Display troubleshooting process 2-12 Satellite P30/P35 Series Maintenance Manual...
  • Page 51 Refer to Chapter 3, Tests and Diagnostics for details. If an error is detected, go to Procedure 3. If an error is not detected, the display is functioning properly. Satellite P30/P35 Series Maintenance Manual 2-13...
  • Page 52 Check 5. Check 5 Replace the CPU with another of the same specifications. If the problem still exists, perform Check 6. Check 6 The system board may be damaged. Replace it with a new one. 2-14 Satellite P30/P35 Series Maintenance Manual...

  • Page 53: Figure 2-4 Fdd Troubleshooting Process

    ( P r o c e d u r e 3 ) R e p la c e s y s te m b o a r d E N D Figure 2-4 FDD troubleshooting process Satellite P30/P35 Series Maintenance Manual 2-15...

  • Page 54: Procedure 3 Connector Check And Replacement Check

    Chapter 4. If the FDD is still not functioning properly, perform Check 3. Check 3 Replace the system board with a new one following the steps in Chapter 4. 2-16 Satellite P30/P35 Series Maintenance Manual...

  • Page 55: Figure 2-5 Keyboard Troubleshooting Process

    ( P r o c e d u r e 3 ) R e p la c e s y s te m b o a r d E N D Figure 2-5 Keyboard troubleshooting process Satellite P30/P35 Series Maintenance Manual 2-17...

  • Page 56: Procedure 1 External Keyboard Check

    Chapter 3, Tests and Diagnostics for more information on how to run the program. If an error is located, go to Procedure 3. If an error does not occur, the keyboard is functioning properly. 2-18 Satellite P30/P35 Series Maintenance Manual...
  • Page 57 The keyboard may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 3. Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite P30/P35 Series Maintenance Manual 2-19...

  • Page 58: Figure 2-6 External Usb Device Troubleshooting Process

    R e p la c e s y s te m b o a r d ( P r o c e d u r e 2 ) E N D Figure 2-6 External USB device troubleshooting process 2-20 Satellite P30/P35 Series Maintenance Manual...
  • Page 59 Go to Procedure 2. Procedure 2 Replace system board If the error persists, the system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite P30/P35 Series Maintenance Manual 2-21...

  • Page 60: Figure 2-7 Tv-Out Troubleshooting Process

    T V fu n c tio n in g o k ? s e t Y es R e p la c e s y s te m b o a rd E N D Figure 2-7 TV-out troubleshooting process 2-22 Satellite P30/P35 Series Maintenance Manual...
  • Page 61 Try connecting a different television to the computer. If the replacement television works, the original set may be damaged. If the replacement set does not work the system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite P30/P35 Series Maintenance Manual 2-23...

  • Page 62: Figure 2-8 5 In 1 Card Troubleshooting Process

    5IN1 (XD, SD, MS, SM, MMC) Failure Troubleshooting START Perform 5 IN 1 card test (Procedure 1) Do errors occur during 5IN1 unit is not 5IN1 card test? faulty. Replace system board Figure 2-8 5 IN 1 card troubleshooting process 2-24 Satellite P30/P35 Series Maintenance Manual...
  • Page 63 If an error occurs during the 5IN1 (XD, SD, MS, SM, MMC) card test, Replace the system board with a new one following the steps in Chapter 4. If no error occurs, it is likely that the original 5IN1 card was faulty. Satellite P30/P35 Series Maintenance Manual 2-25...

  • Page 64: Figure 2-9 Touch Pad Troubleshooting Process

    2 Troubleshooting Procedures 2.10 Touch Pad Troubleshooting 2.10 Touch Pad Troubleshooting START Touch Pad connection check (Procedure 1) Touch Pad replacement check (Procedure 2) Replace system board Figure 2-9 Touch Pad troubleshooting process 2-26 Satellite P30/P35 Series Maintenance Manual...
  • Page 65 The Touch Pad unit or FPC may be defective or damaged. Replace each with a new one following the steps in Chapter 4. If the FDD is still not functioning properly, replace the system board with a new one following the steps in Chapter 4. Satellite P30/P35 Series Maintenance Manual 2-27...

  • Page 66: Figure 2-10 Speaker Troubleshooting Process

    - see Figure 2-1 Perform earphone test (Procedure 2) Do earphones function correctly? Perform connection check (Procedure 3) Perform replacement check (Procedure 4) Replace system board Figure 2-10 Speaker troubleshooting process 2-28 Satellite P30/P35 Series Maintenance Manual...

  • Page 67: Procedure 3 Connection Check

    If the stereo speakers don't sound properly, the stereo speakers may be defective or damaged. Replace them with new ones. If the stereo speakers still do not work properly, try replacing in turn the audio board and system board. Satellite P30/P35 Series Maintenance Manual 2-29...

  • Page 68: Figure 2-11 Dvd-Rom / Multi-Drive Troubleshooting Process

    Audio CD functions ok? cleaning check (Procedure 2) Perform software check (Procedure 3) Perform diagnostic test (Procedure 4) Perform connection and replacement check (Procedure 5) Replace system board Figure 2-11 DVD-ROM / Multi-Drive troubleshooting process Satellite P30 Series Maintenance Manual 2-29...
  • Page 69 The audio test program stored in the Diagnostics Disk will test the drive’s ability to play an audio CD. See Chapter 3 for details. If any errors occur while executing the diagnostic program, go to Procedure 5. 2-30 Satellite P30 Series Maintenance Manual...
  • Page 70 Chapter 4, Replacement Procedures. If the drive is still not functioning properly, perform Check 3. Check 3 The system board may be damaged. Replace it with new one following the instructions in Chapter 4, Replacement Procedures. Satellite P30 Series Maintenance Manual 2-31...

  • Page 71: Figure 2-12 Modem Troubleshooting Process

    (Procedure 1) Check / replace Computer unable to telephone line and detect telephone signal? connections Perform connection check (Procedure 2) Perform replacement check (Procedure 3) Replace system board Figure 2-12 Modem troubleshooting process 2-32 Satellite P30 Series Maintenance Manual...
  • Page 72 The modem card or RJ-11 jack may be faulty. Try replacing them. If the problem persists, the system board may be defective or damaged. Replace the System Board with a new one following the steps in Chapter 4, Replacement Procedures. Satellite P30 Series Maintenance Manual 2-33...

  • Page 73: Figure 2-13 Pcmcia Troubleshooting Process

    2.14 PCMCIA Troubleshooting START Perform SYCARD test (Procedure 1) Do errors occur during PCMCIA unit is SYCARD test? not faulty. Perform PCMCIA socket replacement check (Procedure 2) Replace system board Figure 2-13 PCMCIA troubleshooting process 2-34 Satellite P30 Series Maintenance Manual...
  • Page 74 Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and replace the socket. If the problem persists, the system board may be defective or damaged. Replace the system board with a new one following the steps in Chapter 4. Satellite P30 Series Maintenance Manual 2-35...

  • Page 75: Figure 2-14 Ieee 1394 Troubleshooting Process

    IEEE 1394 port and transmission are not Was an IEEE 1394 problem detected? faulty. Continue troubleshooting - refer to Figure 2.1 Perform connection and replacement check (Procedure 3) Replace system board Figure 2-14 IEEE 1394 troubleshooting process 2-36 Satellite P30 Series Maintenance Manual...
  • Page 76 The transmission cable may be damaged. Replace with a good cable. If the malfunction persists, go to Check 4 Check 4 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite P30 Series Maintenance Manual 2-37...

  • Page 77: Figure 2-15 Wireless Lan Troubleshooting Process

    Continue Was a wireless LAN problem delected? troubleshooting - refer to Figure 2.1 Perform connector and replacement check (Procedure 2) Replace wireless LAN antenna/unit Replace system board Figure 2-15 Wireless LAN troubleshooting process 2-38 Satellite P30 Series Maintenance Manual...
  • Page 78 The wireless LAN unit may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 4. Check 4 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite P30 Series Maintenance Manual 2-39...

  • Page 79: Bluetooth Troubleshooting

    (P roce dure 2) Re pla ce Blue tooth a nte nna m oudle . Re pla ce s ys te m boa rd Figure 2-16 Bluetooth troubleshooting process 2-40 Satellite P30 Series Maintenance Manual...
  • Page 80 The Bluetooth module may be damaged. Replace it with a new one following the instructions in Chapter 4. If the problem still exists, perform Check 4. Check 4 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4. Satellite P30 Series Maintenance Manual 2-41...

  • Page 81: Test And Diagnostic Operation Handbook

    Chapter 3 Test and Diagnostic Operation Handbook Version 1.0 Aug. 13 2004 released...
  • Page 82 2.9. Mouse (Pad) Test ......................16 2.10. LCD Pixels Mode Test ....................18 2.11. Lid Switch Test ......................19 2.12. HDD R/W Test ......................20 2.13. LAN Test ........................22 2.14. RTC Test........................24 2.15. CD Control Button Test………...…………………………………………………...25 3-ii Satellite P30 Series T&D Operation Handbook...

  • Page 83: The Diagnostic Test

    A formatted working diskette for the floppy disk drive test (Floppy Disk Drive Test) A data CD disc (CD-ROM Test) A LAN loopback connector (LAN Test) The following sections explain how to execute the Test & Diagnostic Program and detail the tests within the program. Satellite P30 Series T&D Operation Handbook...

  • Page 84: Executing The Diagnostic Test

    Tests and Diagnostics Operation 2. Executing the Diagnostic Test Toshiba MS-DOS is required to run the DIAGNOSTICS PROGRAM. To start the DIAGNOSTIC PROGRAM, follow these steps: 1. Insert the diagnostics diskette #1 in the floppy disk drive and turn on the computer.
  • Page 85 Test and Diagnostic Operation If the test result passes, the following display will show up: If an error is detected and a test fails, the following message displays: Satellite P30 Series T&D Operation Handbook...
  • Page 86 It will skip this process if “N” key pressed. And then it will check if it’s necessary to leave this program. Program will quit when “Y” key pressed and it will go back main menu for next test if “N” key pressed. Satellite P30 Series T&D Operation Handbook...
  • Page 87 Test and Diagnostic Operation NOTE: Press Pause to pause a test and Enter to resume. Satellite P30 Series T&D Operation Handbook...

  • Page 88: Config Check Test

    NOTE: To execute this test, you must input unit Part Number as “Uppercase Character”. Then it will show its configuration is correct (in green color) or failed (in color). The screen should display as below, indicating whether the test is passed or failed after comparison. Satellite P30 Series T&D Operation Handbook...

  • Page 89: Dmi Check Test

    SKU data. NOTE: To execute this test, you must input unit Part Number as “Uppercase Character”. The screen should display as below, indicating whether the test is passed or failed after comparison. Satellite P30 Series T&D Operation Handbook...

  • Page 90: Speaker Audio Test

    OK within 3 times “Beep” sound generated. NOTE: Remember to tune up the volume as “Maximum” before this test starts. The screen should display as below, indicating whether the test is passed or failed after the question. Satellite P30 Series T&D Operation Handbook...

  • Page 91: Fan On/Off Test

    The computer will stop the fan working after any key pressed. Listen to check if the fan is “OFF” – it means no rotating sound. The screen should display as below, indicating whether the test is passed or failed after the question. Satellite P30 Series T&D Operation Handbook...

  • Page 92: Main Battery Charge Test

    Remain charge capacity (0 ~ 100%) Charge function (PASS/FAIL) - “Battery Is Full” showed when “remain charge capacity” is 100% The screen should display as below, indicating whether the test is passed or failed when finished. 3-10 Satellite P30 Series T&D Operation Handbook...

  • Page 93: Fdd Test

    NOTE: The write-protected device of this formatted diskette should be “Disable”. The subtests run automatically. NOTE: Press “Esc” key can skip the current subtest. The screen should display as below, indicating whether the subtests pass or fail when finished. Satellite P30 Series T&D Operation Handbook 3-11...

  • Page 94: Cd-Rom Test

    Each item can be chosen by manual. When each test item finished, the CD-ROM tray will open. Check whether the tray can open automatically. NOTE: Press “Esc” key can skip the current subtest. The screen should display as below, indicating whether the subtests pass or fail when finished. 3-12 Satellite P30 Series T&D Operation Handbook...

  • Page 95: Keyboard Test

    NOTE: The “Fn” key cannot be tested in the keyboard test. To determine whether the “Fn” key is working correctly, press “Fn+F6 ” or “Fn+F7 ” keys to check if LCD display brightness change gradually. Satellite P30 Series T&D Operation Handbook 3-13...
  • Page 96 Test and Diagnostic Operation 3-14 Satellite P30 Series T&D Operation Handbook...
  • Page 97 Pressing a key also reveals that key’s scan codes in the upper right hand corner of the screen. When the key is depressed, its make code is displayed. When the key is released, the break code is shown. Satellite P30 Series T&D Operation Handbook 3-15...

  • Page 98: Mouse (Pad) Test

    After checking T/Pad buttons and cursor’s function, use “Tab” key or use T/Pad cursor to click the “OK” column will end this test. 3-16 Satellite P30 Series T&D Operation Handbook...
  • Page 99 It will indicate whether the subtests pass or fail after three questions. NOTE: The above figure has three compartments although the Touch Pad installed may only have two buttons. In this case, the central compartment in the figure does not correspond to any button. Satellite P30 Series T&D Operation Handbook 3-17...

  • Page 100: Lcd Pixels Mode Test

    - including 320*200 (4/16/256 colors), 640*200 (2/16 colors), 640*350 (2/16 colors), 640*480 (2/16/256 colors), 800*600 (256 colors) and 1024*768 (256 colors). The screen should display as below, indicating whether the test is passed or failed after the question. 3-18 Satellite P30 Series T&D Operation Handbook...

  • Page 101: Lid Switch Test

    Follow below steps to run this test: 1. Close the LCD cover. 2. Heard 3 “Beep” sound happened during LCD closed. 3. Open the LCD. Then it will indicate whether the test is passed or failed. Satellite P30 Series T&D Operation Handbook 3-19...

  • Page 102: Hdd R/W Test

    2. 12. HDD R/W Test The HDD R/W test allows the user to test aurally HDD read/write function. For data security concern, it is necessary to input password - “TOSHIBA” before HDD write test starts. The HDD test includes three subtests of the: 1.
  • Page 103 NOTE: Press “Ctrl + Break” keys can terminate the current subtest. The screen should display as previous picture, indicating whether the subtest is passed or failed when finished. NOTE: The AC adaptor should be connected to successfully run this test. Satellite P30 Series T&D Operation Handbook 3-21...

  • Page 104: Lan Test

    The LAN test includes two subtests of the: 1. Speed100 - including Ethernet_802.2, Ethernet_II, Ethernet_SNAP and Ethernet_802.3. All test items are in LSB mode. 2. Speed10 including Ethernet_802.2 in LSB mode. The subtests run automatically. 3-22 Satellite P30 Series T&D Operation Handbook...
  • Page 105 Test and Diagnostic Operation The screen should display as below, indicating whether the subtests pass or fail when finished. Satellite P30 Series T&D Operation Handbook 3-23...

  • Page 106: Rtc Test

    Checks the computer’s RTC (Real Time Clock) and calendar functions by comparing the DOS and CMOS values. The test runs automatically. The screen should display as below, indicating whether the test is passed or failed when finished. 3-24 Satellite P30 Series T&D Operation Handbook...

  • Page 107: Cd Control Button Test

    Press each of the buttons on the front panel in turn. A yellow bar will appear on the relevant section of the figure if the button passes the test. Press Esc to quit the test. Satellite P30 Series T&D Operation Handbook 3-25...
  • Page 108 Chapter 4 Replacement Procedures...
  • Page 109 4 Replacement Procedures 4-ii Satellite P30 Series Maintenance Manual...
  • Page 110 Touch Pad ........................4-31 4.14 Speakers ......................... 4-33 4.15 System Board ......................... 4-34 4.16 Fan, Heat Sink, & CPU....................4-36 4.17 Display Mask ......................... 4-39 4.18 LCD Module ........................4-41 4.19 FL Inverter Board ......................4-43 Satellite P30 Series Maintenance Manual 4-iii...
  • Page 111 Figure 4-21 Pulling the wireless LAN antenna wires.............4-27 Figure 4-22 Removing the top cover-1...................4-29 Figure 4-23 Removing the top cover-2...................4-30 Figure 4-24 Removing the touch pad LED board..............4-31 Figure 4-25 Removing the touch pad ..................4-32 4-iv Satellite P30 Series Maintenance Manual...
  • Page 112 Removing the CPU..................... 4-38 Figure 4-33 Removing the display mask................4-39 Figure 4-34 Removing the LCD module-1 ................4-41 Figure 4-35 Removing the LCD module-2 ................4-42 Figure 4-36 Removing the FL inverter board ................ 4-43 Satellite P30 Series Maintenance Manual...

  • Page 113: General

    Refer to the example on the following page. Battery pack Keyboard Wireless LAN Expansion Memory Module Modem Display Assembly Top Cover Display Mask LCD Module System Board Direct Play Speakers Touch Pad Fan & Heat Sink Button Board FL Inverter Board Satellite P30 Series Maintenance Manual...
  • Page 114 Always starts the disassembly process by removing the battery pack. Battery pack Keyboard Wireless LAN Expansion Memory Module Modem Display Assembly Top Cover Display Mask LCD Module System Board Direct Play Speakers Touch Pad Fan & Heat Sink Button Board FL Inverter Board Satellite P30 Seri es Maintenance Manual...

  • Page 115: Safety Precautions

    DANGER: Always use the lithium ion battery pack or backup battery that is authorized by Toshiba or compatible with the unit. Since other battery packs have different specifications, they may be incompatible with the unit, and may burst or explode.

  • Page 116: Battery

    The computer contains many sharp edges and corners, so be careful not to injure yourself. 10. After you have replaced an FRU, make sure the computer is functioning properly by performing the appropriate test on the FRU you have fixed or replaced. Satellite P30 Series Maintenance Manual...

  • Page 117: Disassembly Procedures

    FRU. After installing an FRU in the computer, confirm that the FRU and the computer are functioning properly. Satellite P30 Series Maintenance Manual...

  • Page 118: Tools And Equipment

    Tweezers, to lift out screws that you cannot grasp with your fingers. ESD mats for the floor and the table you are working on. ESD wrist strap or heel grounder. Anti-static carpeting or flooring. Air-ionizers in highly static sensitive areas. Satellite P30 Series Maintenance Manual...

  • Page 119: Battery

    WARNING: The battery is a lithium ion battery and can explode if not properly replaced, used, handled or disposed of. Use only batteries recommended by Toshiba as replacements. Slide the battery pack into the battery bay. The battery bay latch will click automatically.

  • Page 120: Pc Card

    2. Push the eject button once more to pop the PC Card out slightly. 3. Grasp the PC Card and remove it. 4. Push the eject button back into place, if necessary. Figure 4-2 Pressing the eject button Satellite P30 Series Maintenance Manual...
  • Page 121 To install the PC Card, follow the steps below and refer to the figures in the preceding section. Make sure the eject button does not stick out. Insert the PC Card and press gently to ensure a firm connection. Figure 4-3 Installing the PC card Satellite P30 Series Maintenance Manual...

  • Page 122: Hdd

    Turn the computer upside down Remove two black M2.5x5 screws to release the HDD door. Pull on the tab to remove the HDD unit. Figure 4-5 Removing the HDD door 4. Remove the HDD from the HDD case. 4-10 Satellite P30 Series Maintenance Manual...

  • Page 123: Installing The Hdd

    To take apart the HDD, first remove it from the computer as described earlier. 1. Remove four M2.5x3 screws securing the HDD mounting brackets to the HDD. There are two on each side. Figure 4-6 Removing the HDD bracket Satellite P30 Series Maintenance Manual 4-11...

  • Page 124: Optical Drive Module

    To install a device in the optical drive module bay, follow the steps below and refer to the figure in the preceding section. 1. Slide the device into the optical drive module bay. 2. Use one M2.5x5 screw to secure it in position. 4-12 Satellite P30 Series Maintenance Manual...

  • Page 125: Optical Drive

    1. Position the optical drive bracket plate to the rear panel of optical drive. 2. Secure the optical drive bracket plate with two black M2×3 screws. 3. Install the optical drive module into the bay and secure with one M2.5x5 screw. Satellite P30 Series Maintenance Manual 4-13...

  • Page 126: Wireless Lan Unit

    Remove the embedded screw M2.5x6 securing the Mini PCI bracket. Note: If your wireless LAN unit is an ‘A’ type card, then the screw will be a safety screw. Detach the two ends of the wireless LAN antenna. 4-14 Satellite P30 Series Maintenance Manual...
  • Page 127 Grasp the wireless LAN unit and pull it out. Figure 4-10 Removing the wireless LAN unit CAUTION: Do not touch the connectors on the wireless LAN unit or on the computer. Debris on the connectors may cause malfunction. Satellite P30 Series Maintenance Manual 4-15...
  • Page 128 Use the screw M2.5x6 to secure the Mini PCI bracket. Note: If your wireless LAN unit is an ‘A’ type card, then the screw will be a safety screw. Seat the wireless LAN compartment cover and secure it with the embedded security screw. 4-16 Satellite P30 Series Maintenance Manual...

  • Page 129: Expansion Memory

    Seat the cover and secure its screws. Replace the battery. Figure 4-11 Removing the expansion memory CAUTION: Do not touch the connectors on the expansion memory or on the computer. Debris on the connectors may cause memory access problems. Satellite P30 Series Maintenance Manual 4-17...
  • Page 130 Slide your fingernail or a thin object under the cover and lift it off. Figure 4-12 Removing the expansion memory cover Fit the module's connectors into the computer's connectors at about a 45-degree angle and press the module carefully to ensure a firm connection. 4-18 Satellite P30 Series Maintenance Manual...
  • Page 131 4 Replacement Procedures Push the module down so it lies flat. Latches on either side will click into place to secure the module. Figure 4-13 Installing the expansion memory Satellite P30 Series Maintenance Manual 4-19...

  • Page 132: Keyboard

    2. Insert a thin tool into the gap between the strip cover and keyboard to lever the strip cover up and then release the strip cover. Figure 4-14 Removing the strip cover 3. Remove two M2.5×3 black screws securing the keyboard. 4-20 Satellite P30 Series Maintenance Manual...
  • Page 133 4. After removing the screws, flip the keyboard latch with either a screwdriver or a fingernail. 5. Lift the keyboard out of its bay, revealing the keyboard cable. 6. Disconnect the keyboard cable and remove the keyboard from the computer entirely. Satellite P30 Series Maintenance Manual 4-21...

  • Page 134: Installing The Keyboard

    2. Set the keyboard in place and secure it with two M2.5x3 black screws. 3. Engage the flip latch with either a screwdriver or a fingernail. 4. Set the strip cover and press down to secure the strip cover latches engage. 4-22 Satellite P30 Series Maintenance Manual...

  • Page 135: Modem

    1. Remove two black M2.5x3 screws securing the modem module 2. Carefully lift the unit off its connector 3. Disconnect the modem cable from the modem module. Figure 4-17 Removing the modem module Satellite P30 Series Maintenance Manual 4-23...
  • Page 136 1. Fit the modem onto its connector and secure it with two black M2.5x3 screws. 2. Connect the modem cable to the modem module. 3. Replace the keyboard and strip cover as mentioned in 4.9 Keyboard. 4-24 Satellite P30 Series Maintenance Manual...

  • Page 137: Display Assembly

    1. Turn the computer upside down and remove two black M2.5x18 screws. Figure 4-18 Removing the display assembly screws Turn the computer right side up again, and then remove the two black M2.5x5 screws securing the hinge bracket Satellite P30 Series Maintenance Manual 4-25...
  • Page 138 4 Replacement Procedures Figure 4-19 Removing the display assembly screws 3. Disconnect the LCD power cable from the top chassis. 4-26 Satellite P30 Series Maintenance Manual...
  • Page 139 4. Pull the wireless LAN module’s antenna wires through the small hole beside the LCD display cable connector. Figure 4-21 Pulling the wireless LAN antenna wires 5. Lift the display assembly from the computer’s chassis. Satellite P30 Series Maintenance Manual 4-27...

  • Page 140: Installing The Display Assembly

    Connect the LCD power cable to the top chassis. Reinstall the keyboard and wireless LAN module. Secure the hinge bracket with two black M2.5x5 screws Turn the computer upside down and secure two black M2.5x18 screws 4-28 Satellite P30 Series Maintenance Manual...

  • Page 141: Top Cover

    HDD, memory module and wireless LAN as described in the preceding sections, then follow the steps below: 1. Remove two black M2.5x18 black screws and four black M2.5x3 screws securing the top half of the cover: Figure 4-22 Removing the top cover-1 Satellite P30 Series Maintenance Manual 4-29...

  • Page 142: Installing The Top Cover

    Seat the top cover and secure the upper FFC cable. Secure the top cover with two black M2.5x18 black screws and four black M2.5x3 screws. Turn the computer upside down and secure twelve black M2.5x18 screws and four black M2.5x5 screws. 4-30 Satellite P30 Series Maintenance Manual...

  • Page 143: Touch Pad

    Touch Pad, and then detach it. Note: One screw is under the mylar flap. 2. Remove one M2.5x3 screw securing the Touch Pad Bracket and then slide it out. Figure 4-24 Removing the Touch Pad LED board Satellite P30 Series Maintenance Manual 4-31...

  • Page 144: Installing The Touch Pad

    To install the Touch Pad, follow the steps below and refer to the figures in the preceding section: 1. Secure Touch Pad Bracket with one M2.5x3 screw. 2. Connect the Touch Pad LED board FFC cable to the Touch Pad, and then secure it with two black M2.5x3 screws. 4-32 Satellite P30 Series Maintenance Manual...

  • Page 145: Speakers

    To install the speakers, follow the steps below and refer to the figure in the preceding section: 1. Seat each speaker. 2. Secure each speaker with two special screws. 3. Attached the left and right speaker cables to the system board. Satellite P30 Series Maintenance Manual 4-33...

  • Page 146: System Board

    2. Remove the two silver hex screws securing the system board to the back chassis. Figure 4-28 Removing the hexagonal screws 3. Pry the backside of the chassis out, then remove the system board. 4-34 Satellite P30 Series Maintenance Manual...

  • Page 147: Installing The System Board

    To install the system board, follow the steps below and refer to the figures in the preceding section. 1. Seat the system board in the chassis 2. Secure it to the back chassis with two silver hex screws. 3. Secure it to the bottom cover with three black M2.5x5 screws. Satellite P30 Series Maintenance Manual 4-35...

  • Page 148: Fan, Heat Sink, & Cpu

    CAUTION: If you remove the heat sink, you should use the CPU grease tool to remove the grease on the CPU and heat sink. On the topside of the system board, remove four M2x5 screws securing the fan module. Figure 4-29 Removing the fan module screws 4-36 Satellite P30 Series Maintenance Manual...
  • Page 149 Remove the four embedded screws securing the heat sink in the order indicated on the heat sink. Lift out the heat sink while preventing stress to the CPU below. Figure 4-31 Removing the heat sink Satellite P30 Series Maintenance Manual 4-37...

  • Page 150: Installing The Cpu

    Seat the heat sink over the CPU and secure with the four embedded screws in the order indicated on the heat sink. Seat the fan module. Attach the two fan connectors to the system board. Secure the fan module to the topside of the system board with four M2x5 screws. 4-38 Satellite P30 Series Maintenance Manual...

  • Page 151: Display Mask

    Start with the four snaps at the top of the display mask. Continue unsnapping the display mask along the two sides and the bottom edge to remove display. Figure 4-33 Removing the display mask Satellite P30 Series Maintenance Manual 4-39...

  • Page 152: Installing The Display Mask

    To install the display mask, follow the steps below and refer to the figures in the preceding section. Seat the display mask and secure the snaps on each side. Secure the display mask with four M2.5x5 screws at the corners. Cover the screws with mask seals. 4-40 Satellite P30 Series Maintenance Manual...

  • Page 153: Lcd Module

    Disconnect the LCD cable from the FL inverter board. Remove six M2.5x5 black screws securing the LCD module bracket to LCD cover. Figure 4-34 Removing the LCD module-1 Remove eight M2x3 screws securing LCD module bracket to the LCD module. Satellite P30 Series Maintenance Manual 4-41...

  • Page 154: Fl Inverter Board

    3. Secure the LCD module bracket to LCD cover with six black M2.5x5 screws. 4. Connect the LCD cable to the FL inverter board. 5. Secure the FL inverter board with one black M2x3 screw and the LCD cable with one black M2.5x3 screw. 4-42 Satellite P30 Series Maintenance Manual...

  • Page 155: Fl Inverter Board

    To install the FL inverter board, follow the steps below and refer to the figure in the preceding section. 1. Secure one M2x3 black screw connecting the FL inverter board to the LCD display assembly. 2. Reassemble the computer. Satellite P30 Series Maintenance Manual 4-43...

  • Page 156: Appendices

    Appendices...
  • Page 157 Appendices App-ii Satellite P10 Series Maintenance Manual...

  • Page 158: Appendix A Handling The Lcd Module

    Appendix Contents Appendix A Handling the LCD Module................A-1 Appendix B Board Layout..................... B-1 System Board (FRDSY*) Bottom View................. B-1 System Board (FRDSY*) Top View ................B-2 Appendix C Pin Assignments ....................C-1 JP24/JP26 SODIMM I/F (200-PIN) ................C-1 JP12 RGB I/F pin assignments (15-pin) ................. C-5 JP29 HDD I/F pin assignments (44-pin).................
  • Page 159 Appendices Figures Figure B-1 System board (FRDSY*) layout (Bottom)............B-1 Figure B.2 System board (FRDSY*) layout (Top) ............... B-2 Figure E-1 US keyboard ......................E-1 Figure E-2 UK keyboard ....................... E-1 Figure E-3 SP keyboard......................E-2 Figure E-4 JA keyboard......................E-2 Figure E-5 KO keyboard .......................

  • Page 160: Table

    Tables Table B-1 System board ICs (top and bottom) ..............B-3 Table B-2 System board connectors (top and bottom) ............B-4 Table C-1 SODIMM I/F pin assignments (200-PIN) ............C-1 Table C-2 LCD I/F pin assignments (22-pin) ..............C-5 Table C-3 RGB I/F pin assignments (15-pin)..............

  • Page 161: Appendix A Handling The Lcd Module

    Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assembly or disassembly. Therefore, please observe the following precautions when handling it: 1. When installing the LCD module in the LCD cover, be sure to seat it so that it is properly aligned and maximum visibility of the display is maintained.
  • Page 162 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent. Apply the agent to a cloth and then wipe the panel’s surface.
  • Page 163 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge.
  • Page 164 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. 9.
  • Page 165 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These materials can release gas that can damage the panel’s polarization. Satellite A70 Series Maintenance Manual...
  • Page 166 Satellite A70 Series Maintenance Manual...

  • Page 167: Appendix B Board Layout

    Appendix B Appendix B Board Layout B.1 System Board (FRDSY*) Bottom View Figure B-1 System board (FRDSY*) layout (Bottom) Satellite P30 Series Maintenance Manual...
  • Page 168 B.2 System Board (FRDSY*) Top View Figure B-2 System board (FRDSY*) layout (Top) Satellite P30 Series Maintenance Manual...
  • Page 169 Table B-1 System board ICs (top and bottom) Mark Number Name ATI_RC300ML / RX3000ML ATI_M11P ICS951402AGT ATI_IXP150 KB910 RTL8100CL VIA_VT6301S U10,U17,U37,U43 VGA RAM 1MB Flash ROM ALC250 CB714 Satellite A70 Series Maintenance Manual...
  • Page 170 RJ11/RJ45 JP18 JP19 Microphone in jack JP20 Headphone out jack JP22 1394 JP23 MINI PCI JP24 DDR-SODIMM SLOT1 JP25 USB PORT JP26 DDR-SODIMM SLOT0 JP29 JP32 5 in 1 JCPU1 CPU Socket PJP1 AC IN Satellite P30 Series Maintenance Manual...
  • Page 171 PJP2 Battery LID Switch Mode Key Power Bottom Rev Bottom Frd Bottom Play Bottom Stop Bottom Kill Switch Audio Amp : TPA6010A4PWP LAN : RTL8100CL VGA RAM (NB) : ATI RX300ML for EFQ00 K/B : KB910 VGA RAM (SB) : ATI IXP150_A46 1MB Flash ROM VGA RAM VGA Chip : ATI M11P...
  • Page 172 Satellite P30 Series Maintenance Manual...

  • Page 173: Appendix C Pin Assignments

    Pin No. Signal name Pin No. Signal Name VREF VREF 25VDD 2.5VDD DQS0 DQ12 2.5VDD 2.5VDD DQ13 DQS1 DQ10 DQ14 DQ11 DQ15 2.5VDD 2.5VDD 2.5VDD CK0# DQ16 DQ20 DQ17 DQ21 2.5VDD 2.5VDD DQS2 DQ18 DQ22 Satellite P30 Series Maintenance Manual...
  • Page 174 Signal name Pin No. Signal Name DQ19 DQ23 DQ24 DQ28 2.5VDD 2.5VDD DQ25 DQ29 DQS3 DQ26 DQ30 DQ27 DQ31 2.5VDD 2.5VDD DQS8 2.5VDD 2.5VDD DU/RESET# CK2# 2.5VDD 2.5VDD 2.5VDD CKE1 CKE0 DU/A13 DU/BA2 2.5VDD 2.5VDD Satellite P30 Series Maintenance Manual...
  • Page 175 DQS4 DQ34 DQ38 DQ35 DQ39 DQ40 DQ44 2.5VDD 2.5VDD DQ41 DQ45 DQS5 DQ42 DQ46 DQ43 DQ47 2.5VDD 2.5VDD 2.5VDD CK1# DQ48 DQ52 DQ49 DQ53 2.5VDD 2.5VDD DQS6 DQ50 DQ54 DQ51 DQ55 DQ56 DQ60 2.5VDD 2.5VDD Satellite P30 Series Maintenance Manual...
  • Page 176 Table C-1 SODIMM I/F pin assignments (200-PIN) (4/4) Pin No. Signal name Pin No. Signal Name DQ57 DQ61 DQS7 DQ58 DQ62 DQ59 DQ63 2.5VDD 2.5VDD 3.3VDD_SPD VDD_ID Satellite P30 Series Maintenance Manual...
  • Page 177 JP12 Table C-2 RGB I/F pin assignments (15-pin) Pin No. Signal name Pin No. Signal Name CRT_R CRT_G CRT_B +CRT_VCC DDC_DATA DACA_HSYNC DACA_VSYNC DDC_CLK Satellite P30 Series Maintenance Manual...
  • Page 178 Pin No. Signal Name PIDE-RST# PDD7 PDD8 PDD6 PDD9 PDD5 PDD10 PDD4 PDD11 PDD3 PDD12 PDD2 PDD13 PDD1 PDD14 PDD0 PDD15 PDDREQ PDIOW# PDIOR# PDIORDY PCSEL PDDACK# IRQ14 PDA1 PDA0 PDA2 PDCS1# PDCS3# PHDD_LED# +5VS +5VS Satellite P30 Series Maintenance Manual...
  • Page 179 SIDE_RST# SDD8 SDD7 SDD9 SDD6 SDD10 SDD5 SDD11 SDD4 SDD12 SDD3 SDD13 SDD2 SDD14 SDD1 SDD15 SDD0 SDDREQ SDIOR# SDIOW# SIORDY SDDACK# IRQ15 SDA1 +5VCD SDA0 SDA2 SDCS1# SDCS3# SHDD_LED# +5VCD +5VCD +5VCD +5VCD +5VCD Satellite P30 Series Maintenance Manual...
  • Page 180 Satellite P30 Series Maintenance Manual...
  • Page 181 S1_A18 S1_A14 S1_A19 S1_WE# S1_A20 S1_RDY# S1_A21 +S1_VCC +S1_VCC +S1_VPP +S1_VPP S1_A16 S1_A22 S1_A15 S1_A23 S1_A12 S1_A24 S1_A7 S1_A25 S1_A6 S1_VS2 S1_A5 S1_RST S1_A4 S1_WAIT# S1_A3 S1_INPACK# S1_A2 S1_REG# S1_A1 S1_BVD2 S1_A0 S1_BVD1 S1_D0 S1_D8 Satellite P30 Series Maintenance Manual...
  • Page 182 Table C-5 PC Card I/F pin assignments (84-pin) (2/2) Pin No. Signal name Pin No. Signal Name S1_D1 S1_D9 S1_D2 S1_D10 S1_WP S1_CD2# C-10 Satellite P30 Series Maintenance Manual...
  • Page 183 Signal Name SWITCH PIRQH# +5VS_MINIPCI +3.3V PIRQG# +3.3V PCICLK PCIRST# +3.3V REQ1# GNT1# +3.3V AD31 WLANME# AD29 AD30 AD27 +3.3V AD25 AD28 AD26 CBE3# AD24 AD23 MINI_IDSEL AD21 AD22 AD19 AD20 AD17 AD18 CBE2# AD16 Satellite P30 Series Maintenance Manual C-11...
  • Page 184 Signal Name IRDY# +3.3V FRAME# PM_CLKRUN# TRDY# PCI_SERR# STOP# +3.3V PCI_PERR# DEVSEL# C/BE1# AD14 AD15 AD13 AD12 AD11 AD10 AD09 AD08 C/BE0# AD07 +3.3V +3.3V AD06 AD05 AD04 AD02 AD03 AD00 +5VS_MINIPCI AD01 +5VS_MINIPCI +3.3V C-12 Satellite P30 Series Maintenance Manual...
  • Page 185 Negative LVDS differential data input (Even), [B2-B5, HS, VS, DE] EIN2+ Positive LVDS differential data input (Even), [B2-B5, HS, VS, DE] ECLKIN- Negative LVDS differential clock input (Even) ECLKIN+ Positive LVDS differential clock input (Even) Satellite P30 Series Maintenance Manual C-13...
  • Page 186 SD-DAT1 #S.M/xD-CE SD-DAT0 S.M/xD-VCC SD-CLK #S.M-CD SD-VCC S.M/xD-03 SD-CMD S.M/xD-02 SD-DAT3 S.M/xD-01 SD-DAT2 S.M-D0 M5-B5 S.M/xD-WP-IN MS-DATA1 #S.M/xD-WE MS-DATA0 #S.M/xD-ALE MS-DATA2 #S.M/xD-CLE MS-INS xD-CD MS-DATA3 xD-VCC MS-SCLK SD-CD-COM MS-VCC SD-CD-SW S.M/xD-04 SM-WP-SW S.M/xD-05 5in1-GND C-14 Satellite P30 Series Maintenance Manual...
  • Page 187 Table C-9-2 JP30 Fan I/F pin assignments (3-pin) Pin No. Signal name Pin No. Signal Name FAN2 FAN-SPEED2 C.10 PJP1 Table C-10 AC Adaptor Connector pin assignments (3-pin) Pin No. Signal name Pin No. Signal Name Satellite P30 Series Maintenance Manual C-15...
  • Page 188 Table C-11 Microphone I/F pin assignments (6-pin) Pin No. Signal name Pin No. Signal Name ANGND BIAS ANGND C.12 JP20 Table C-12 Headphone Connector pin assignments (6-pin) Pin No. Signal name Pin No. Signal Name ANGND INTSPK_L1 INTSPK_R1 NBA_PLUG ANGND C-16 Satellite P30 Series Maintenance Manual...

  • Page 189: Appendix D Keyboard Scan/Character Codes

    Appendix D Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Keytop Note Make Break Make Break ‘ ~ 7 & BkSp SatelliteA70 Series Maintenance Manual...
  • Page 190 Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Caps Lock ‘ “ Enter Shift (L) No.102 , < . > Shift (R) Satellite A70 Series Maintenance Manual...
  • Page 191 Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Ctrl(L) Alt (L) Space ALT (R) Ctrl(R) ← Home ↑ ↓ PgUp PgDn → Satellite A70 Series Maintenance Manual...
  • Page 192 Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Keytop Note Make Break Make Break PrintSc Pause — — — — Notes: 1. * Scan codes differ by mode. 2. * Scan codes differ by overlay function. 3.
  • Page 193 Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Make Break Make Break E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 E0 AA E0 53 E0 D3 E0 2A E0 F0...
  • Page 194 Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Make Break Make Break E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 E0 F0 12 E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 E0 F0 12...
  • Page 195 Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Keytop Make Break Make Break (–) Table D-6 No.124 key scan code Code set 1 Code set 2 Shift Make Break Make Break Prt Sc Common Ctrl + Shift + Alt + Satellite A70 Series Maintenance Manual...
  • Page 196 Table D-7 No.126 key scan code Key top Shift Code set 1 Code set 2 Make Make Pause Common Ctrl *: This key generates only make codes. Satellite A70 Series Maintenance Manual...

  • Page 197: Appendix E Key Layout

    Appendix E Appendix E Key Layout United States (US) Keyboard Figure E-1 US keyboard United Kingdom (UK) Keyboard Figure E-2 UK keyboard Satellite A70 Series Maintenance Manual...
  • Page 198 Spanish (SP) Keyboard Figure E-3 SP keyboard Japanese (JA) Keyboard Figure E-4 JA keyboard Satellite A70 Series Maintenance Manual...
  • Page 199 Korean (KO) Keyboard Figure E-5 KO keyboard Korean (CF) Keyboard Figure E-6 CF keyboard Satellite A70 Series Maintenance Manual...
  • Page 200 Portuguese-ALPS Keyboard Figure E-7 Portuguese-ALPS keyboard US-INTE_ALPS Keyboard Figure E-8 US-INTE_ALPS Keyboard Satellite A70 Series Maintenance Manual...
  • Page 201 Greece(GR) Keyboard Figure E-9 GR keyboard E.10 France (FR) Keyboard Figure E-10 FR keyboard Satellite A70 Series Maintenance Manual...
  • Page 202 E.11 Chinese (CH) Keyboard Figure E-11 CH keyboard E.12 Swissc-Darfon Keyboard Figure E-12 Swissc-Darfon keyboard Satellite A70 Series Maintenance Manual...
  • Page 203 E.13 IT new Keyboard Figure E-13 IT new keyboard Satellite A70 Series Maintenance Manual...
  • Page 204 Satellite A70 Series Maintenance Manual...

  • Page 205: Appendix F Series Screw Torque List

    Appendix F Series Screw Torque List Table F-1 Series Screw Torque List SCREW SCREW P/N SCREW SPEC Q'ty LOCATION TORQUE LCD HINGE ASSY MMCK20030Z0 M2*3 1.2~1.5kg L&R TO LCD 17.0” 170” LCD HINGEs MMCK25050Z0 M2.5*5 TO COVER SUB ASSY INVERTER TO MMCK20030Z0 M2*3 COVER SUB ASSY...
  • Page 206 SCREW SCREW P/N SCREW SPEC Q'ty LOCATION TORQUE MAC925003Z0 M2.5*3 LU TO LL TOP SIDE LL TO LU BOTTOM MAC925018Z0 M2.5*18 SIDE LL TO LU BOTTOM MMCK25050Z0 M2.5*5 SIDE LCD ASSY TO MAC925018Z0 M2.5*18 LOGIC TOP SIDE LCD ASSY TO MMCK25050Z0 M2.5*5 LOGIC TOP SIDE...

  • Page 207: Appendix G Reliability

    Appendix G Reliability The following table shows MTBF (Mean Time Between Failures) for each component. Table G-1 MTBF Component Time (hours) 50,000 Keyboard 40,000 300,000 Removable FDD 30,000 Optical (DVD/CD) drive 60,000 AC adaptor 60,000 Satellite P30 Series Maintenance Manual...
  • Page 208 Satellite P30 Series Maintenance Manual...

Table of Contents