Table of Contents
Advertisement
Example:
Press
to shorten the stitch length.
→ The value in the display gets smaller.
Press
to lengthen the stitch length.
→ The value in the display gets bigger.
Memo
• Press
to check changes made to the
stitch.
• Press
after pressing
original setting.
CAUTION
• If the stitches get bunched together, lengthen
the stitch length and continue sewing. Do not
continue sewing without lengthening the stitch
length. Otherwise, the needle may break and
cause injury.
Setting the "L/R SHIFT"
Follow the steps below when you want to change
the placement of the zigzag stitch pattern by
moving it left and right.
Example:
Press
→ The value in the display appears with a minus sign.
Press
left needle position.
to return to the
→ The value in the display appears with a plus sign.
to shift the pattern to the left.
to shift the pattern to the right side of the
Memo
• Press
after pressing
original setting.
Note
• After adjusting the "L/R SHIFT", slowly
rotate the handwheel toward you
(counterclockwise) and check that the
needle does not touch the presser foot. If
the needle hits the presser foot, the needle
may bend or break.
STITCH SETTINGS
S
1
to return to the
Sewing S-11
Advertisement
Chapters
Table of Contents
Troubleshooting
