Table of Contents
Advertisement
LCD SCREEN
Using the Machine Setting Mode Key
Press
to change the default machine settings (needle stop position, embroidery speed, opening
display, etc.). To display the different settings screens, press
"General settings" or
Memo
• Press
or
Sewing settings
a Select whether to use the sewing speed controller to determine the zigzag width (see page S-39).
b Make adjustments to character or decorative stitch patterns (see page S-82).
c Adjust the presser foot height. (Select the height of the presser foot when the presser foot is raised.)
d Adjust the presser foot pressure. (The higher the number, the greater the pressure will be. Set the pressure at "3"
for normal sewing.) (see page S-17)
If the dual feed foot is installed and its roller is lowered, the pressure setting is fixed at "2" and cannot be changed.
e Fine tune the feed of the dual feed foot (see page B-67).
f Select whether "1-01 Straight stitch (Left)" or "1-03 Straight stitch (Middle)" is the utility stitch that is automatically
selected when the machine is turned on. (see page S-21)
g Select whether "Utility Stitch" or "Quilt Stitch" displayed first on the stitch selection screen when the "Sewing" is
selected.
h You can activate this setting after connecting the optional multi-function foot controller. (These settings are not
operable unless the optional multi-function foot controller is attached to the machine.)
i Change the height of the presser foot when sewing is stopped when the pivot setting is selected (see page S-15).
Adjust the presser foot to one of the three heights (3.2 mm, 5.0 mm and 7.5 mm). (see page S-15)
j Change the height of the presser foot when the machine is set to free motion sewing mode (see page S-40).
k When set to "ON", the thickness of the fabric is automatically detected by an internal sensor while sewing. This
enables the fabric to be fed smoothly (see pages S-8 and S-17).
l Press to save the current settings screen image to USB media (see page B-33)
B-26
for "Embroidery settings".
next to the page numbers, to display a different settings screen.
a
b
c
d
e
l
for "Sewing settings",
f
g
h
l
for
i
j
k
l
Advertisement
Chapters
Table of Contents
Troubleshooting
