Table of Contents
Advertisement
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
Stitch Name
Hand-look
J 17 17 16 16
quilting
Quilting
J 21 21 17 17
stitch
(for stippling)
1
*
Do not use reverse stitching.
The values below "Auto" are set when the pattern is selected. The setting can be adjusted to any value within the range
indicated below "Manual".
CAUTION
● Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if a
button is accidentally pressed and the machine starts sewing.
Appliqué stitching
a
Cut out the appliqué, leaving a seam
allowance of between 3 and 5 mm (1/8 and 3/
16 inch).
a Seam allowance
b
Place a pattern made of thick paper on the
back of the appliqué, and then fold over the
seam allowance using an iron.
72
Pattern No.
Application
Straight stitch quilting
that looks hand-sewn
Quilting background
stitching (stippling)
a
Stitch Width
Stitch Length
[mm (inch)]
[mm (inch)]
Auto
Manual
Auto
0.0
0.0–7.0
2.5
1.0–4.0
(0)
(0–1/4)
(3/32)
(1/16–3/16)
7.0
1.0–-7.0
1.6
1.0–4.0
(1/4)
(1/16–1/4)
(1/16)
(1/16–3/16)
c
Turn the fabric over, and then baste, glue or
pin it onto the fabric that it will be attached
to.
a
a Basting stitching
Turn on the machine.
d
e
With the pattern selection dial,
select stitch
f
Attach zigzag foot "J".
• For details, refer to "Replacing the presser
foot" (page 33).
Reverse/
Reinforcement
Stitching
Manual
No No Reinforcement
No No Reinforcement
or
.
Advertisement
Table of Contents
