Table of Contents
Advertisement
UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
e
Align the seam with the center of the zipper,
and then baste the zipper in place.
a
a Wrong side of fabric
b Basting stitching
c Zipper
f
With the pattern selection dial,
select stitch
.
g
Attach the presser foot holder to the right side
of the pin of zipper foot "I".
I
a Right side of the pin
b Needle drop point
• For details, refer to "Replacing the presser
foot" (page 33).
CAUTION
● When using zipper foot "I", be sure to use a
center needle position, and slowly turn the
handwheel toward you to check that the needle
does not touch the presser foot. If a different
stitch is selected and the needle hits the presser
foot, the needle may bend or break.
66
b
c
a
b
h
Topstitch around the zipper.
a
b
a Stitching
b Right side of fabric
c Basting stitching
d End of zipper opening
CAUTION
● When sewing, be sure that the needle does
not touch the zipper, otherwise the needle
may bend or break.
i
Remove the basting stitching.
Inserting a side zipper
Stitching is sewn on only one piece of fabric. Use
this type of zipper for side openings and back
openings.
a
a Stitching
b Right side of fabric
c End of zipper opening
The following procedure will describe how to stitch
on the left side, as shown in the illustration.
c
d
b
c
Advertisement
Table of Contents
