Advertisement
e
This guide explains the usage of and necessary settings for this unit. Please
follow the procedure to complete the settings. Do not lose this guide.
e
Refer to the USER'S MANUAL found on the supplied CD-ROM or on the
Web for details of other settings and uses not explained in this guide.
Refer to
"The
USER'S MANUAL" on the reverse for more details.
e
Some Pioneer products that connect to this product will need to be
configured. Refer to their respective USER'S MANUAL for more details.
e
For technical enquiries regarding this product, refer to
"Please
Read First"
for Support Centre details.
Features
Connect the following Pioneer A V devices using a
Wireless LAN.
AV
RECEIVER
Blu-ray Disc player
Wireless LAN Converter
(this unit)
Connect supported AV devices
easily over a Wireless LAN
using this unit.
Wireless
LAN router
(base)
ADSL modem
ONU (Optical
Network
Unit)
Wired router. etc.
Setup Procedure
STEP3
Check the Base
*
Check that the base has no problem connecting to
the Internet.
Connect the Unit
e
If the base has a WPS button
~Follow
the instructions
in "Step
2
Connect the Unit
(WPS)"
to
connect the unit to the base.
e
If the base does not have a WPS button
~Follow
the instructions in "Step 2 Connect the Unit
(Manual)"
to
connect the unit to the base.
*
If you have problems using the
"WPS
Button."
use the
"Manual"
procedure.
Step 3 Connect AV Devices
Preparation
Prepare the following.
D
Wireless LAN Converter (this unit)
D
LAN/USB feeder cable (included)
*
This cable is a combination of a
LAN cable and a USB feeder cable
that supplies power to the unit
without using an AC adapter.
Use the supplied cable only.
D
Getting Started (this guide)
D
Supported AV device, computer (not included)
D
Internet connection (not included)
Part Names
Front
Back
Side
1
I
CD®®
®®
®
CD
POWER indicator
®
POWER connector
0)
RESET button
®
WPS indicator
@
ETHERNET port
@
WIRELESS indicator
®
WPS button
Before Configuring the Unit
e
If you do not have an Internet connection, subscribe before
configuring the unit.
e
Do not connect the LAN/USB feeder cable to a USB hub.
STEP1
Check the Base
0
Check that the Wireless
LAN
router (base) has no
problem connecting to the Internet.
0
Modem
Wireless LAN
rou•:t:e:r"111•~;;~-
(base)
Computer
This procedure requires a separate Wireless LAN router (base).
If you do not have a base. please prepare one.
Check that the base has a WPS function. Refer to the
Wireless
LAN
router user's manual for details.
WPS is a function that
configures
the base connection and security
using a button.
•
Some bases have WPS written on them.
~
If the base has
a
WPS button
Continue to "Step 2 (WPS)" and
"Step
3"
.
..... If
the base
does not have a WPS button
Continue to
"Step
2 (Manual)" and "Step 3".
Advertisement
Table of Contents
