Advertisement
Available languages
Available languages
3) Connect the main unit of the printer to the multi purpose drawer.
<1>Attach the rear mounting plates using a supplied screw for each.
Rear mounting plate
Tray frame
Caution: Insert the mounting plate under the desk frame.
<2>Pull out the paper tray of the multi purpose drawer until it stops and
attach the front mounting plates using a supplied screw for each.
Then, remove the lock of the paper tray and close the tray.
Front mounting plate
Screw
<3>Reattach the paper tray of the main unit of the printer.
4) Remove the multi rear cabinet.
<1>Remove the two screws that secure the multi rear cabinet.
Rear mounting plate
Screw
Screw
Mounting
plate
Front
mounting plate
Screw
Screw
Multi rear cabinet
Screw
AR-D28/D27/MU2 UNPACKING AND INSTALLATION
<2>Remove the two screws that secure the Harness protection sheet.
<3> Remove the filament tape that secure the the power supply I/F harness.
5) Connect the harness to the main unit of the printer.
<1>Remove the screw that fixes the harness cover of the main unit of
the printer and then slide the harness cover up to remove it.
Process the harness cover as shown in the illustration.
Cut out.
<2>Connect the connector of the relay harness of the multi purpose
drawer to the connector of the PCU PWB of the main unit of the printer.
4 – 5
Screw
Harness cover
CN10
Connector
Advertisement
Chapters
