Cisco CB21AG Installation And Configuration Manual page 88
Cisco aironet 802.11a/b/g wireless lan client adapters (cb21ag and pi21ag)
Hide thumbs
Also See for CB21AG:
- Installation and configuration manual (226 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Setting Security Parameters
Table 5-4
Security Feature
EAP-TLS authentication
If using ADU to
configure card
If using Windows XP
to configure card
EAP-TLS authentication with WPA or WPA2
If using ADU to
configure card
If using Windows XP
to configure card
PEAP authentication
If using ADU to
configure card
If using Windows XP
to configure card
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
5-22
Client and Access Point Security Settings (continued)
Client Setting
Choose 802.1x and EAP-TLS; then
set EAP-TLS settings
Choose Enable network access
control using IEEE 802.1X and
Smart Card or other Certificate as
the EAP Type
Choose WPA/WPA2/CCKM and
EAP-TLS; then set EAP-TLS
settings
Enable WPA and choose Enable
network access control using IEEE
802.1X and Smart Card or other
Certificate as the EAP Type
Note
WPA2 is not yet available
in the Microsoft Wireless
Configuration Manager in
Windows XP.
Choose 802.1x and PEAP
(EAP-GTC) or PEAP
(EAP-MSCHAP V2); then set
PEAP settings
Choose Enable network access
control using IEEE 802.1X and
PEAP as the EAP Type
Chapter 5
Configuring the Client Adapter
Access Point Setting
Set up and enable WEP and enable
Open with EAP Authentication for
the SSID
Set up and enable WEP and enable
Open with EAP Authentication for
the SSID
For WPA, choose a cipher suite that
includes TKIP; then enable WPA
and Open with EAP Authentication
for the SSID
For WPA2, choose a cipher suite
that includes AES-CCMP; then
enable WPA and Open with EAP
Authentication for the SSID
To allow both WPA and
Note
non-WPA clients to use the
SSID, enable optional
WPA.
For WPA, choose a cipher suite that
includes TKIP; then enable WPA
and Open with EAP Authentication
for the SSID
Note
To allow both WPA and
non-WPA clients to use the
SSID, enable optional
WPA.
Set up and enable WEP and enable
Open with EAP Authentication for
the SSID
Set up and enable WEP and enable
Open with EAP Authentication for
the SSID
OL-4211-03
Advertisement
Table of Contents
Troubleshooting
