Cisco CB21AG Installation And Configuration Manual page 60
Cisco aironet 802.11a/b/g wireless lan client adapters (cb21ag and pi21ag)
Hide thumbs
Also See for CB21AG:
- Installation and configuration manual (226 pages) ,
- Install wizard (34 pages) ,
- User manual (22 pages)
Table of Contents
Advertisement
Creating a New Profile
Figure 4-3
Note
Perform one of the following:
Step 5
•
If you want this profile to use the default values, click OK. The profile is added to the profiles list
on the Cisco Aironet Desktop Utility (Profile Management) window.
•
If you want to change any of the configuration parameter settings, follow the instructions in
Chapter
Management) window.
Note
Go to the
Step 6
selected automatically or go to the
profile.
Cisco Aironet 802.11a/b/g Wireless LAN Client Adapters (CB21AG and PI21AG) Installation and Configuration Guide
4-6
Profile Management (General) Window
If you are creating a profile after scanning for an available network, the SSID of the network
appears in the SSID1 field.
5. The profile is added to the profiles list on the Cisco Aironet Desktop Utility (Profile
The profiles for PC-Cardbus cards are tied to the slot in which the card is inserted. Therefore,
you must always insert your PC-Cardbus card into the same slot, create profiles for both slots,
or export the profiles from one slot and import them for the other slot.
"Including a Profile in Auto Profile Selection" section on page 4-7
"Selecting the Active Profile" section on page 4-9
Chapter 4
Using the Profile Manager
to enable the profile to be
to activate the
OL-4211-03
Advertisement
Table of Contents
Troubleshooting
