Table of Contents
Advertisement
Compact USB 2.0 10/100 Network Adapter
Chapter 3: Driver Installation for the Compact USB 2.0
10/100 Network Adapter
Overview
This chapter will take you through all the steps necessary to install the driver for the Compact USB 2.0 10/100
Network Adapter. After physically connecting the Adapter to your computer's USB port or hub, follow these
instructions to install the hardware device driver. The installation procedures for the hardware device driver vary
depending on your PC's operating system, so make sure to follow the instructions for your operating system. The
instructions also may vary slightly depending on your current operating system's configuration. If at any time
during the installation you encounter problems, consult "Appendix A: Troubleshooting."
Driver Installation for Windows XP
NOTE: Do not click Cancel at any time during the installation
process. Doing so will prevent your driver from being properly
1. If you haven't already, start your computer.
installed on your PC.
2. Windows XP will automatically detect the Adapter connected to your computer and display the Welcome to
the Found New Hardware Wizard screen. Select Install from a list or specific location (Advanced), and
insert the Driver CD into the CD-ROM drive. Then click the Next button.
3. Select Search for the best driver in these locations. Only select Include this location in the search:, and
enter D:\winxp in the field provided. Then click the Next button.
NOTE: Throughout this user guide, it is assumed that "D" is the
letter of your CD-ROM drive.
Chapter 3: Driver Installation for the Compact USB 2.0 10/100 Network Adapter
Overview
Figure 3-1: Welcome
Figure 3-2: Choose your Search and Installation
Options
6
- Quick Links:
- Chapter 2: Getting to Know and...
Hide quick links:
Advertisement
Table of Contents
