Table of Contents
Advertisement
Chapter 2: Getting to Know the
Wireless-B Game Adapter
The Game Adapter's Back Panel
The Back Panel, shown in Figure 2-1, is where
you'll connect the Game Adapter and find the
Reset button.
Channel Selector The Channel Selector button
selects the channel, when
using the Game Adapter in Ad-
hoc mode, or Infrastructure
(IN), when using the Game
Adapter
in
mode, for fast setup.
The Reset button resets the
Reset
Game Adapter to its factory
default settings.
X - II
This
switch
Network
crossover
mode
straight-through mode (II). If
you are connecting the Game
Adapter directly to a computer
or to an Uplink port, choose
straight-through (II).
Network
The Network port is where you
will connect the Ethernet net-
work cable.
The Power port is where you
Power
will connect the power adapter.
2
Infrastructure
toggles
the
port
between
(X)
and
Figure 2-1
The Game Adapter's LEDs
The Game Adapter's LEDs,
shown in Figure 2-2, display the
activity on your network.
Green. The Ethernet LED will light up when data is trans-
Ethernet
mitted over the Ethernet cable.
Wireless
Green. The Wireless LED will be lit steadily when the
Game Adapter is connected to the wired network. The LED
will blink when there is network traffic.
Wireless Channel When using the Channel Selector button for fast setup, this
will display the channel on which the Game Adapter is
broadcasting (1 - 13) or indicated Infrastructure (IN), when
using the Game Adapter in Infrastructure mode, for fast
setup.
Figure 2-2
3
Advertisement
Table of Contents
