Reception Into Memory; Printing A Fax From Memory - Brother MFC-9660 Owner's Manual
Hide thumbs
Also See for MFC-9660:
- Owner's manual (179 pages) ,
- Quick setup manual (4 pages) ,
- Service manual (239 pages)
Table of Contents
Advertisement
Reception into Memory
As soon as the paper tray becomes empty during fax reception, the screen will display "CHECK
PAPER"; please put some paper in the paper tray.
If the MEMORY RECEPTION switch is ON at this time...
The current fax reception will continue, with the remaining page(s) being stored in memory, subject
to available memory. Subsequent incoming faxes will also be stored into memory until the memory
is full, following with no further incoming fax calls will be automatically answered. To print all data,
put fresh paper in the paper tray.
If the MEMORY RECEPTION switch is OFF at this time...
The current fax reception will continue, with the remaining page(s) being stored in memory, subject
to available memory. Subsequent incoming fax calls will not be automatically answered until fresh
paper is put in the paper tray. To print the last fax received, put paper in the paper tray.
1
Press Menu, 2, 1, 6.
2
Use
or
to select ON (or OFF), and press Set when the screen displays your selection.
3
Press Stop/Exit.
Printing a Fax from Memory
If you have fax storage ON for remote retrieval or fax forwarding, you can still print a fax from the
machine's memory when you are at the machine: (See Setting Fax Storage, page 46)
1
Press Menu, 2, 5, 4.
2
Press Fax Start.
3
After all the data saved in the memory is printed out, press Stop/Exit.
27
Chapter 3
Advertisement
Table of Contents
