Related Manuals for Zanussi ZD 19/5 DAC
Summary of Contents for Zanussi ZD 19/5 DAC
- Page 1 REFRIGERATEUR CONGELATEUR FRIDGE-FREEZER ZD 19/5 DAC NOTICE D’UTILISATION INSTRUCTION BOOKLET 2222 298-66...
-
Page 2: Warnings
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. -
Page 3: Table Of Contents
¥ If the appliance has been transported horizontally, Environment Protection it is possible that the oil contained in the compressor flows in the refrigerant circuit. It is This appliance does not contain gasses which could advisable to wait at least two hours before damage the ozone layer, in either its refrigerant circuit connecting the appliance to allow the oil to flow or insulation materials. -
Page 4: Fresh Food Refrigeration
Fresh food refrigeration To obtain the best performance: ¥ do not store warm food or evaporating liquids in the refrigerator; ¥ do cover or wrap the food, particularly if it has a strong flavour. ¥ Position food so that air can circulate freely round Freezing fresh food The 4-star compartment is suitable for... -
Page 5: Air Circulation
Air circulation Inside the appliance, there is a fan (DAC) which is turned on by means of the switch. The pilot light will light up. It is recommended that the fan be used when the ambient temperature is above 25 ¡C with the knob set to the position identified by the symbol (see the diagram). -
Page 6: Hints
HINTS ¥ wrap up the food in aluminium foil or polythene Hints for refrigeration and make sure that the packages are airtight; Useful hints: ¥ do not allow fresh, unfrozen food to touch food which is already frozen, thus avoiding a rise in Meat (all types): wrap in polythene bags and place temperature of the latter;... -
Page 7: Interior Light
Interior light The light bulb inside the refrigerator compartment can be reached as follows: - unscrew the light cover securing screw. - unhook the moving part as shown in the figure. If the light does not come on when the door is open, check that it is screwed into place properly. -
Page 8: Customer Service And Spare Parts
CUSTOMER SERVICE AND SPARE PARTS If the appliance is not functioning properly, check opening is not obstructed (see ÒDefrostingÓ that: section). ¥ the plug is firmly in the wall socket and the mains ¥ If your appliance is still not working properly after power switch is on;... -
Page 9: Installation
INSTALLATION Location The appliance should be installed well away from sources of heat such as radiators, boilers, direct sunlight etc. Ensure that air can circulate freely around the back of the cabinet. To ensure best performance, if the appliance is positioned below an overhanging wall unit, the minimum distance between the top of the cabinet and the wall unit must be at least 100 mm (A). -
Page 10: Door Reversal
Door reversal Unplug the refrigerator from the wall socket before performing the following operations: 1. Remove the lower hinge (1), and the support foot (2). 2. Unscrew the front left support foot and screw it into the corresponding position on the opposite side. - Page 11 B.P. 20139 - 60307 SENLIS Cedex TŽl : 03 44 62 27 78 e-mail : zanussi.frs@notes.electrolux.fr permanence tŽl. du lundi au vendredi de 8 h 30 ˆ 12 h 30 et de 13 h 30 ˆ 18 h 00 Choisir un nouvel appareil et/ou conseils d'utilisation...