Related Manuals for Zanussi ZD 16/5 R
Summary of Contents for Zanussi ZD 16/5 R
- Page 1 KÜHL-GEFRIER- SCHRANK REFRIGERATEUR- CONGELATEUR TWEEDEURS- KOELKAST FRIDGE-FREEZER ZD 16/5 R BEDIENUNGSANLEITUNG MODE D’EMPLOI GEBRUIKSAANWIJZING INSTRUCTION BOOKLET 2222 088-11...
-
Page 2: Warnings
WARNINGS It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is supplied with the appliance in order that the new owner can be acquainted with the functioning of the appliance and the relevant warnings. -
Page 3: Table Of Contents
which may cause it to explode, resulting in installation instructions. damage to the appliance. Do not use a ¥ Parts which heat up should not be exposed. mechanical device or any artificial means to Wherever possible the back of the product speed up the thawing process other than those should be against a wall. -
Page 4: Fresh Food - Storage Of Frozen Food - Thawing - Ice-Cube Production
Freezing fresh food Cleaning the interior The 4-star compartment is suitable for Before using the appliance for the first time, wash long term storage of commercially frozen food, and the interior and all internal accessories with luke- for freezing fresh food. warm water and some neutral soap so as to remove the typical smell of a brand-new product, then dry To freeze fresh foods It is not necessary to change... -
Page 5: Use / Movable Shelves -Positioning The Door Shelves
Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired. D351 Positioning the door shelves To permit storage of food packages of various sizes, the door shelves can be placed at different heights. To make these adjustments proceed as follows: Gradually pull the shelf in the direction of the arrows until it comes free, then reposition as required. -
Page 6: Hints / Hints For Refrigeration - Hints For Freezing - Hints For Storage Of Frozen Food
HINTS Hints for refrigeration Useful hints: Meat (all types): wrap in polythene bags and place ¥ on the inner door or special card (if supplied) you on the glass shelf above the vegetable drawer. will find sketches of various animals and food types together with the recommended storage For safety, store in this way only one or two days time (in months) from the time of freezing;... -
Page 7: Maintenance / Periodic Cleaning - Periods Of No Operation - Interior Light - Defrosting
MAINTENANCE Periods of non-operation Unplug the appliance before carrying out When the appliance is not in use for long periods, any maintenance operation. take the following precautions: Warning remove the plug from the wall socket; This appliance contains hydrocarbons in its cooling remove all food;... -
Page 8: Customer Service And Spare Parts
2. remove any stored food, wrap it in several layers of newspaper and put it in a cool place; 3. leave the door open, place a basin on the top shelf of the refrigerator compartment, under the drain hole, remove the plug as shown in figure.. 4. -
Page 9: Technical Information / Installation - Location
TECHNICAL INFORMATION Energy Efficiency class Net Fridge Capacity lt. Net Frezer Capacity lt. Energy Consumption kWh/24h 0,72 Energy Consumption kWh/year Freezing Capacity kg Rising time h Dimensions mm High 1240 Width Depth The technical infomation are situated in the rating plate on the internal left side of the appliance . INSTALLATION Location The appliance should be installed well away from... -
Page 10: Installation/ Electrical Connection - Rear Spacers
Electrical connection Before plugging in, ensure that the voltage and frequency shown on the serial number plate correspond to your domestic power supply. Voltage can vary by ±6% of the rated voltage. For operation with different voltages, a suitably sized auto-transformer must be used. -
Page 11: Installation/ Door Reversibility
Door reversibility Unplug the appliance from the power supply before carrying out the below-mentioned operations. 1. Remove the lower hinge (3), the pin (1) and the support foot (2). 2. Unscrew the front left support foot and screw it into the corresponding position on the opposite side.