Contents For the Installer For the User Technical specifications Safety information Unpacking Description of the appliance - Damages - Rinse conditioner dispenser - Use - Spray arm - Building-in - Coarse filter - Protecting the machine against freezing - Fine filter - Detergent dispenser Installation Controls and programme table...
Safety information Before installing and first using the dishwasher, read this instruction booklet carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the dishwasher are thoroughly familiar with its operation and safety features. Save these instructions and make sure they remain with the dishwasher if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety.
Description of the appliance Rinse conditioner dispenser (1) Coarse filter (3) Use of a rinse conditioner will result in cleaner and faster The purpose of the coarse filter is to catch large objects drying of the load, since it helps water and soil to run off. such as toothpicks and pieces of eggshell.
Controls and programme table - All figures are nominal and vary for example due to temperature variations on the inlet water. - The figures apply to washing up 5 settings. Temperature selector Door lock 55° - Button in Press the handle down and open the door. Avoid opening the door while the machine is running.
Loading How to load the dishes The illustration shows the machine loaded with five stan- dard place settings. Your own dishes are not likely to be identical to this load, but if you follow the advice below we are sure you will be pleased with the results. Always place glasses, cups and bowls upside down.
Using the appliance Starting the programme: 1. Scrape or rinse off solid food remnants. 2. Load the dishwasher. (See the basket and loading). Pour the detergent into the compartment, for a normal load about 1-2 tablespoons. 3. Close the door. 4.
In the event of a fault If water leaks from the machine, turn off the water supply tap or stopcock immediately and isolate the machine from the electrical supply by removing the plug from the wall socket. Check that all seals, seams and connections are watertight. There is always a certain risk of leakages in any machine connected to a water supply, no matter what water safety features it may have.
Service Service and spare parts Servicing and repairs must be carried out by a service company authorized by the supplier. Use only spare parts supplied by these. Before calling service, use the trouble shooting list ”In the event of a fault” to try to attend to the fault yourself. If ser- vice is called in to remedy a problem that is in this list, there is a risk that you will be responsible for the cost.
Unpacking Damages If the dishwasher has been damaged during transport, you should immediately notify the company responsible for delivering it. Check that the dishwasher is undamaged. If you discover any damage, faults or that anything is missing, you should notify the dealer immediately. Never leave packaging material in a place where children may play with it.
Installation Positioning In its standard version the machine is intended for instal- lation on a kitchen sink or worktop. To function properly the machine must be fully level. Its height can be adjusted with the adjustable feet (8 mm each). Water supply The temperature of the water supply should not exceed 65°...