Table of Contents
Advertisement
Chapter 3
Managing Cisco SIP IP Phones
Step 5
Highlight and press the Select soft key to configure the parameters shown in
Table 3-5
SIP Configuration Parameters
Parameter
Name
Short Name
Authentication Name
Authentication Password Required when
Display Name
Proxy Address
Proxy Port
Step 6
Press the Back soft key to exit the Line 1 Configuration menu.
Step 7
To configure additional lines on the phone, highlight the next Line x Settings, press the Select soft key
and repeat
In addition to the line settings, you can highlight and press Select to configure the parameters on the SIP
Step 8
Configuration menu shown in
Required or Optional
Required
Number or e-mail address used when registering. When entering a
number, enter the number without any dashes. For example, enter
555-1212 as 5551212. When entering an e-mail address, enter the e-mail
ID without the host name.
Optional
Name or number associated with the linex_name as you want it to display
on the phone's LCD if the linex_name value exceeds the display area. For
example, if the linex_name value is the phone number 111-222-333-4444,
you can specify 34444 for this parameter to have 3444 display on the LCD
instead. Alternatively, if the value for the linex_name parameter is the
e-mail address "username@company.com", you can specify the
"username" to have just the user name appear on the LCD instead. This
parameter is used for display only. If a value is not specified for this
parameter, the value in the Name variable is displayed.
Required when
Name used by the phone for authentication if a registration is challenged
registration is enabled
by the proxy server during initialization.
Password used by the phone for authentication if a registration is
registration is enabled
challenged by the proxy server during initialization. If a value is not
configured for the Authentication Password parameter when registration
is enabled, the default logical password is used. The default logical
password is SIPmacaddress, where macaddress is the MAC address of the
phone.
Optional
Identification as it should appear for caller identification. For example,
instead of jdoe@company.com appearing on phones that have caller ID,
you can specify John Doe in this parameter to have John Doe appear on
the callee end instead. If a value is not specified for this parameter, the
Name value is used.
Required
IP address of the primary SIP proxy server that will be used by the phone.
Enter this address in IP dotted-decimal notation.
Optional
Port number of the primary SIP proxy server. This is the port that the SIP
client will use. The default is 5060.
Step 5
and
Step
6, and then continue with
Table
Step
8.
3-6:
Cisco SIP IP Phone Administrator Guide
Modifying the Phone's SIP Settings
Table
3-5, as necessary:
3-27
- Quick Links:
- Using the Command-Line Interface
Hide quick links:
Advertisement
Table of Contents
