Table of Contents
Advertisement
The control panel
Delay start button
Function buttons
Programme selection
buttons
Half load button
Function buttons:
in addition to the selection of the
washing programme and half load option, the following
functions can also be set with the help of these buttons:
- the setting of the water softener,
- the cancelling of a programme in progress.
Programme selection buttons:
washing programme occurs by pressing one of these buttons
(see "Washing programmes chart").
«Half load» button:
this option is useful and economical
when only a few dishes need washing reducing the
consumption of water and energy. This option must be linked
to the selection of a washing programme.
The corresponding indicator light will illuminate.
Load the dishes into both baskets (lower basket and upper
basket).
With the selection of this option, the prewash phase is
automatically excluded with programme 2 (Intensive 70°C). (In
this case the detergent dose for the prewash phase is no
longer necessary).
The duration of the washing phase with programme 5 (Bio
50°C with prewash) will be reduced.
With programmes 1 (Rinse and Hold), 3 (Quick Wash 30
(Auto) and 6 (Delicate 45°C no prewash) it is not possible to
select the half load option (Button deactivated - indicator light
off).
When using this option we recommend to reduce the dose of
detergent that is normally used for a complete load.
«Delay start» button:
programme to be delayed from 1 to 19 hours.
The digital display indicates:
- the level of hardness to which the water softener is set,
- the number corresponding to the selected washing
programme,
- the approximate remaining time of the running programme,
- the countdown of the delay start,
- fault codes concerning malfunction of the dishwasher.
Digital display
Indicator lights
the selection of a
this option allows the start of the
Door handle
Indicator lights:
Wash: illuminates when the washing and rinsing
phases are running.
Dry: illuminates when the drying phase is running.
End of programme: illuminates when the washing
programme has ended.
As soon as you select a washing programme, the phase
indicator lights for that programme will start flashing. As the
programme starts, the phase indicator lights turn off except for
the indicator light of the phase in progress which will remain lit
with a static light.
Salt: salt refilling indicator light, illuminates when the
salt has run out
Rinse-Aid: rinse aid refilling indicator light,
illuminates when the rinse aid has run out
The salt and rinse aid indicator lights are never illuminated
while a washing programme is running even if filling with salt
and rinse aid is necessary.
I
), 4
25
On/Off indicator light
On/Off button
have the following meanings:
- Quick Links:
- Washing Programmes
Hide quick links:
Advertisement
Table of Contents
