Thank you for selecting our appliance We wish you lots of enjoyment with your new appliance and we hope that you will consider our brand again when purchasing household appliances. Please read this user manual carefully and keep it throughout the product life cycle as a reference document.
Safety information • Under no circumstances should you attempt In the interest of your safety and to ensure the to repair the machine yourself. Repairs car- correct use, before installing and first using the ried out by inexperienced persons will cause appliance, read this user manual carefully, in- injury or serious malfunctioning.
Installation or if the control panel, work top or plinth area are damaged such that the inside of the ap- • Check your dishwasher for any transport pliance is freely accessible. Contact your damage. Never connect a damaged ma- local Service Force centre, in order to avoid chine.
Control panel On/Off button Programme selection buttons Delay start button Indicator lights Function buttons • Press On/Off button, ALL programme selec- Setting mode tion button lights are illuminated = appliance IMPORTANT! in setting mode. Always remember that when performing oper- •...
Page 6
Function buttons In addition to the dishwashing programme selection, the following functions can also be set with the help of these buttons. – the setting of the water softener, – the cancelling of a programme in progress. Programme selection buttons •...
Page 7
Delay start button This option allows the start of the programme to be delayed by 3 or 6 hours. Before selecting the washing programme, press the On/Off button and then press the delay start button until the light corresponding to 3h or 6h illuminates.
Indicator lights Rinse aid Illuminates when rinse aid needs to be filled. 1) As soon as you select a washing programme, the phase indicator lights for that programme will start flashing. As the programme starts, the phase indicator lights turn off except for the indicator light of the phase in progress which will remain lit with a static light.
Programme Degree of soil Type of load Programme descrip- tion Rinse and Hold Any. 1 cold rinse (to avoid Partial load (to be completed later in the day). food scraps from sticking together). This programme does not require the use of de- tergent.
Page 10
Water hardness Adjusting the water hardness Use of salt setting °dH °TH mmol/l manually electronically 51 - 70 91 - 125 9,1 - 12,5 level 10 43 - 50 76 - 90 7,6 - 8,9 level 9 37 - 42 65 - 75 6,51 - 7,5 level 8...
• The dishwasher must be switched off. • The End of programme light might flash 5 times, Switch on the dishwasher by pressing the On/Off for example. The flashing is repeated every 5 sec- button. onds. • Press and hold simultaneously function buttons B •...
IMPORTANT! Immediately start a complete programme. IMPORTANT! Water will overflow from the container as salt is add- Remove any trace of salt. Replace the cap tightly turning it clockwise until it stops with a click. IMPORTANT! Top up the special salt when the light on the control panel illuminates.
Adjusting the dosage of rinse aid Increase the dose if there are drops of water or Reduce the dose if there are whitish streaks on lime spots on the dishes after washing. the dishes or a bluish film on glassware or knife blades.
Page 14
For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: • Cutlery with wooden, horn, china or mother-of- • Only wash stoneware in the dishwasher if it is spe- pearls handles. cially marked as being dishwasher-safe by the manufacturer.
The two rows of prongs on the lower basket can be easily lowered to allow you to load pots, pans and bowls. Load upper basket. Light For taller items, the cup If plates are to be loaded in the upper basket: load items (plastic bowls etc.) racks can be folded up- them starting from the rear positions;...
To move to the higher position proceed as fol- lows: 1. Pull out the basket until it stops. 2. Carefully lift both sides upwards until the mecha- nism is engaged and the basket is stable. To lower the basket to the original position pro- ceed as follows: 1.
For programmes with When using detergent Close the lid. prewash add an addition- tablets: place detergent al detergent dose in com- tablets in compartment partmentB. "3 in 1 function" This appliance is equipped with the "3 in 1 func- the indicator lights for salt and rinse aid are de- tion", that allows the use of the "3 in 1"...
function "indicator light illuminates. This means 4. To activate the rinse aid dispenser, press that the function is active. button B again, the end of programme in- To deactivate the function press the same but- dicator light illuminates, indicating that the tons again until the indicator light correspond- rinse aid dispenser has been activated.
Care and cleaning Cleaning the filters IMPORTANT! NEVER use the dishwasher without filters. In- correct repositioning and fitting of the filters will produce poor washing results. Clean filters A, B and C Turn the handle about 1/4 Remove filter A from the thoroughly under running turn anticlockwise and base of the washing...
abrasive products, scouring pads or solvent Frost precautions (acetone, trichloroethylene etc..). Avoid placing the machine in a location where the temperature is below 0°C. If this is unavoid- Internal cleaning able, empty the machine, close the appliance Ensure that the seals around the door, the de- door, disconnect the water inlet pipe and empty tergent and rinse aid dispensers are cleaned regularly with a damp cloth.
caused by inappropriate waste handling of this local council, your household waste disposal product. For more detailed information about service or the shop where you purchased the recycling of this product, please contact your product. Something not working The dishwasher will not start or stops during Switch off the dishwasher, open the door and operation.
Page 22
Fault code and malfunction Possible cause and solution • The programme does not start. • The dishwasher door has not been properly closed. Close the door. • The main plug is not plugged in. Insert the mains plug. • The fuse has blown in the household fuse box. Replace the fuse.
The wash results are not satisfactory The dishes are wet and dull • Rinse aid was not used. • The rinse aid dispenser is empty. There are streaks, milky spots or a bluish coating on • Decrease rinse aid dosing. glasses and dishes Water drops have dries onto glasses and dishes •...
Consumption values Programme Programme duration Energy consumption Water (litres) (in minutes) (in kWh) Eat-Load-Run BIO 50° (Test pro- 1,05 gramme for Test Insti- tutes) Rinse and Hold Hints for test institutes Testing in accordance with EN 60704 must be aid dispenser have been filled with salt and carried out with appliance fully loaded and us- rinse aid respectively and using the test pro- ing the test programme (see "Consumption...
cup racks: position A Installation (max. 60°) or cold water. Nevertheless we ad- WARNING! vise you a cold water supply. Any electrical and/or plumbing work required to install this appliance should be carried out by a WARNING! qualified electrician and/or plumber or compe- Only use, for connection to the water mains, tent person.
Drain hose Connect drain hose to Required height: 30 to Ensure that the hoses When connecting the the sink. Secure it with 100 cm above bottom of are not kinked, crushed drain hose to an under the supplied hose clamp. the dishwasher.
Fitting under a counter Be sure that once the appliance has been in- stalled, it is easily accessible for the service By removing the dishwasher s worktop, you engineer in the event that a repair is required. can install it under a close fitting sink unit or a pre-existing top.
Page 28
livered to the first end user. These guar- nance or failure to respect the assembly antee terms do not apply in the event of instructions or directions for use. use for professional or equivalent purpo- Defects that result from repairs or meas- ses.
15. Except in the event where liability is legally cerned and that they can withstand the local imposed, this declaration of guarantee climatic and environmental conditions. For ap- terms excludes any compensation for pliances purchased abroad, the user must first damage outside the appliance for which ensure that they meet the qualifications re- quired in Belgium.
Page 30
Slavonska avenija 3, 10000 Za- greb Ireland +353 1 40 90 753 Long Mile Road Dublin 12 Italia +39 (0) 434 558500 C.so Lino Zanussi, 26 - 33080 Por- cia (PN) Latvija +37 17 84 59 34 Kr. Barona iela 130/2, LV-1012, Riga...
Page 31
Lietuva +370 5 2780609 Ozo 10A, LT 08200 Vilnius Luxembourg +352 42 431 301 Rue de Bitbourg, 7, L-1273 Hamm Magyarország +36 1 252 1773 H-1142 Budapest XIV, Erzsébet királyné útja 87 Nederland +31 17 24 68 300 Vennootsweg 1, 2404 CG - Alphen aan den Rijn Norge +47 81 5 30 222...
Page 32
www.electrolux.com 156995210-00-21032007 Subject to change without notice...