WASHING MACHINE S T I R A L X N A Q M A { I N A F C S 7 2 0 C I N ST R UCTI ON- A ND I N S TA LL A TI O N BO O K L ET RUKOWODSTWO PO USTANOWKE I |KSPLUATACII 822 90 14-97...
Contents For the User For the Installer Safety information Technical specifications Description of the appliance Unpacking the machine -Machine front, Machine rear -If the machine is damaged -Control panel -When lifting the machine -Transit locking devices Programme chart -Identification of materials General washing information Installation 15-16...
Safety information Before installing and first using the washing machine, read the instruction booklet carefully, including its hints and warnings. Doing so will ensure that your machine will perform properly and to best advantage. Anyone using the machine should be thoroughly familiar with its instructions for use and safety features. Save these instructions and make sure they remain with the machine if it is moved or sold, so that everyone using it through its life can be properly informed on appliance use and safety.
Description of the appliance Machine front Control panel Door Door latch All feet adjustable Machine rear Transit locking Electrical lead devices Discharge hose Inlet hose - 4 -...
The control panel Pushbuttons Knob controls and detergent dispenser – After selecting the wash programme Temperature control – For setting tempera- and temperature, push this button in to start tures between and 90°. Follow care label the machine. (See also, Indicator light). recommendations.
Programme chart Cotton (dry load weight: 3.0 kg) Load Degree of Progr. Temp. Programme Progr. type soiling selection setting (C) content time (min.) 90° C programme with White Heavily pre-wash. ~ 147 articles soiled 3 rinses and spin at 700 rpm/min. 90°...
Page 7
Synthetics and Delicate (dry load weight: 1.5 kg) Wool (dry load weight: 1.0 kg) Load Degree of Progr. Temp. Progr. Programme type soiling selection setting (C) time (min.) content 60° C programme Normally without pre-wash. ~ 74 Synthetics soiled 3 rinses and spin at 600 rpm/min.
General washing information Detergent and fabric conditioner Liquid detergent The type and the quantity of detergent you use both A suitable liquid detergent can be used instead of have an impact on the results you achieve with your powder detergent for programmes with low or medium washing machine.
Using your appliance The very first time that the machine is used you should run a wash programme with no load in the drum, to clear any residues which may have been left by the manufac-turing process. Pour approx. 100 ml of detergent straight into the drum and run programme G, 40°...
Maintenance The cabinet Clean the outside surfaces of the machine using a mild (non-abrasive) household cleaning product. Finish by removing remaining traces of the product with a damp cloth. Do not use cleaning products which contain alcohol (spirits), thinners and similar substances. The detergent dispenser In time, residues of detergent and fabric conditioner are likely to build up inside the detergent dispenser.
Descaling If your water supply is harder than 7° dH, you should descale your washing machine at least once every three months. Use approx. 150 ml of citric acid instead of detergent and run a wash programme at the highest temperature with no wash load in the machine.
If the machine is not working Symptom Check The machine will not start. Have you pressed the ON/OFF button? Is there power to the machine? Has the fuse blow? Is the door closed properly? Have you set the programme control knob properly? Is the water tap turned on? Is the water tap turned on?
Service Service and spare parts Servicing and possible repairs must be carried out by a service company authorized by the supplier. Use only spare parts supplied by these. Before calling service, use the trouble shooting table ”If the machine is not working” to try to attend to the fault yourself.
Unpacking the machine If the machine is damaged If the machine has been damaged during transportation, you should immediately notify the company responsible for delivering it. Check that the washing machine is undamaged. If you discover any damage, faults or that anything is missing, you should notify the seller immediately.
Installation Levelling the machine The machine must be installed on a sound and firm surface and must not be touching walls or furniture. Adjust the feet to level the machine. Make sure the machine is resting on all four feet (Fig. 1). Some vibration is normal and unavoidable when the machine is spinning the load, particularly if the floor is not a concrete one.
Installation Water discharge These three alternatives are possible for the dis- charge hose: Over the top edge of a washtub: If you intend the drain hose from the machine to empty into a sink, make sure that the hose will not move when the machine is emptying.