Contents Safety instructions Disposal Economical and ecological dishwashing Installation instructions Fitting under a counter Levelling Water supply connections Water outlet hose connection Electrical connection Description of the appliance The control panel Prior to using for the first time The water softener Filling with dishwasher salt Rinse aid In daily use...
Safety instructions It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner, or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to know the functioning of the appliance and the relevant safety information.
Installation instructions Any electrical and/or plumbing work required to install The water pressure must be within the limits given in the this appliance should be carried out by a qualified "Technical specifications". Your local Water Authority will electrician and/or plumber or competent person. advise you on the average mains pressure in your area.
Electrical connection Information concerning the electrical connection is given on the rating plate on the edge of the dishwasher’s door. Before plugging the appliance into the wall socket, make sure that: 1. The mains voltage and current rating at the site of installation match the nominal voltage and current rating given on the rating plate.
The control panel Function buttons On/Off indicator light Phase indicator lights On/Off button Programme selection buttons "Salt" and "rinse aid" indicator lights Programme guide Function buttons: Salt and rinse aid indicator lights in addition to the dishwashing programme selected, the following functions can also be set Salt refilling indicator light: illuminates when the with the help of these buttons: salt has run out.
Prior to using for the first time Before using your dishwasher for the first time: b) Setting electronically (The dishwasher must be switched off) 1. Ensure that the electrical and water connections comply with the installation instructions The dishwasher is factory set at level 5. 2.
Filling with dishwasher salt Rinse aid Only use salt specifically designed for use in Rinse aid is automatically added during the last rinse, ensuring dishwashers. thorough rinsing, and spot and streak free drying. All other types of salt not specifically designed for use in The dispenser, which is positioned inside the door, holds about a dishwasher, especially table salt, will damage the water 110 ml of rinse aid, which is sufficient for between 16 and 40...
In daily use Check if it’s necessary to refill with dishwasher salt or rinse Loading cutlery and dishes Sponges, household cloths and any object that can Load cutlery and dishes into the dishwasher. absorb water may not be washed in the dishwasher. Fill with dishwasher detergent .
The upper basket Use of detergent The upper basket is designed for plates (dessert plates, Only use detergents specifically designed for use in saucers, dinner plates of up to 24 cm in diameter), salad dishwashers. bowls, cups and glasses. Using no more than the correct amount of detergent Arrange items on and underneath the cup racks so that water contributes to reducing pollution.
Different kinds of detergent Detergent tablets Detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals.
Washing programmes Programme Degree of soil Position Cycle description (2) Consumption values of the Energy Water Programme type of load programme consumption consumption duration (in kWh) (in litres) (in minutes) selector dial Hot prewash Main wash up to 70°C Heavy soil. Intensive 70°...
Starting a washing programme 1. Check that the baskets have been 7 . End of the washing programme loaded correctly and that the spray The dishwasher will automatically stop and the END indicator light will illuminate. arms can rotate freely The indicator light of the programme just ended will remain on.
Maintenance and cleaning Clean the external surfaces of the machine and control panel Attention! with a damp soft cloth. If necessary use only neutral Under no circumstances may the dishwasher be used without detergents. Never use abrasive products, scouring pads or filters.
Something not working Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the instructions given here, without calling out an engineer..a flashing fault code appears The dishwasher will not start or stops during operation. The intervention of an alarm is indicated by: - the continuous flashing of the indicator light of the running programme, - a combination of flashing and pauses of the end of programme indicator light (as described in the chart).
...the wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to wrong arrangement of the load.
Hints for test centres Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes" chart). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes"...
Page 20
152950 05/0 02/06 Subject to change without notice...