Advertisement
Quick Links
Download this manual
See also:
Operating Manual
MODEL
AN-PR1500H
HOME CINEMA RACK SYSTEM
This quick Start Guide will help you to correctly install and operate your system.
1
Accessories
Top glass cover x 1
Remote control x 1
Installing the main unit and
2
the subwoofer
1. Pull up both speakers outwards.
2. Turn the unit. Place the glass shelf on top of it.
Top glass cover cushion
Wooden shelf
3. Place the wooden shelf on top of the screw.
4. Cover the screws on the speakers with the screw covers provided.
Notes:
It is advisable for the top glass cover to be carried by 2 persons.
Top glass with sticker on its surface, must face upwards.
The maximum load for the top glass cover on the unit is 80 kg.
The glass is made of reinforced glass, but dropping pointed objects on it
or strongly hitting the surface may cause it to break.
The top glass cover and wooden shelf board are not fastened to the unit.
Take care when transporting the unit, otherwise these parts may fall off
and there is a risk of damage and injury.
Wooden shelf board x 1
"AA" size batteries (UM/SUM-3,
R6, HP-7 or similar) x 2
Protection
sheet
Top glass cover
Sticker up side
Screw cover
Wire clips x 5
FM aerial x 1
HMDI cable x 1
3
Remote control battery installation
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
1
Open the battery cover.
2
Insert the batteries as shown.
3
Close the cover.
4
To turn the power on
After checking all the connections have been made correctly, connect the
AC power lead to the wall socket.
Screw cover x 8
Cleaning cloth x 1
Wall socket
(AC 220 - 240 V ~ 50 Hz)
TINSEA216AWZZ
08D R MW 1
Advertisement
Related Manuals for Sharp AN-PR1500H
Summary of Contents for Sharp AN-PR1500H
- Page 1 MODEL AN-PR1500H HOME CINEMA RACK SYSTEM This quick Start Guide will help you to correctly install and operate your system. Accessories Wire clips x 5 Top glass cover x 1 Wooden shelf board x 1 Screw cover x 8 "AA" size batteries (UM/SUM-3,...
- Page 2 Playing a disc Turn on your system Press the ON/STAND-BY button. If the power does not turn on, check whether the power lead is plugged in properly. Press the DVD/CD button on the remote control or FUNCTION button repeatedly on the main unit to select DVD/CD function. Insert the disc into the disc slot, label side up.