Table of Contents
Advertisement
Room monitor
Entering SMS service centres, specifying Active Send Centre
The number for at least one SMS service centre must be saved in the device. SMS messages are
received from every entered SMS service centre as long as they are registered with their service
provider. Your SMS messages are sent via the SMS service centre that is entered as the active
send centre.
¤
Menu key v.
¤
Menu page Settings.
Enter SMS service centre:
ber of the SMS service centre.
Specify Active Send Centre:
service centre (1 ... 4). For the SMS centres 2 to 4, the setting only applies to the next SMS.
Please note
If you have agreed a flat fixed line network rate with your network operator, the chargeable
numbers with dialling code 0900 are often blocked. If, in this case, you enter a 0900 number
for the SMS service centre, you will not be able to send text messages from your phone.
Room monitor
When the room monitor is switched on, the stored (internal or external) destination number is
called as soon as a defined noise level is exceeded in the vicinity of the handset.
Incoming calls are signalled only via the display, the lighting is reduced to 50%. Vibration alarm,
ringtones, advisory tones and paging are switched off.
Caution
u
Always check the function when switching on (noise sensitivity, connection to an
external number).
Please note that the room monitor is only activated 20 seconds after being
switched on.
u
Place the handset in the charger so that the front with the microphone is facing the baby
and the distance between the handset and the baby is no more than 1 to 2 metres.
u
No answering machine may be activated at the destination number.
Changing the settings:
Menu key v.
In [ Ç Room Monitor] touch [ N Edit].
¤
¤
and the destination for the room monitor call (External or Internal). Touch
¤
Enter the destination number or select the internal number.
[ è Save].
Switch on room monitor:
¤
Accept alarm call:
c or pick up the receiver.
¤
Cancel alarm call:
Switch off room monitor:
key on the left.
30
¤
¤
'
Touch
next to an SMS service centre.
Confirm with è.
¤
¤
At the top of the display, touch the number of the desired SMS
Menu key v.
¤
On the destination phone/handset of the alarm call, press the pick-up key
Press a.
¤
On the handset on which the room monitor is activated, touch the
Ë
[
SMS Service Centres]
¤
Select the sensitivity (High or Low)
[ Ç Room Monitor]
¤
¤
Enter the phone num-
'
next to Number.
Confirm with è.
¤
¤
¤
Touch the key on the right.
Touch
el en
Hide quick links:
Advertisement
Table of Contents
