Table of Contents
Advertisement
Available languages
Available languages
Quick Links
Location of Controls
Remote Control Buttons
EJECT
(Ejects tape)
POWER
(Turns VCR off/on)
VCR (mode)
(Enables VCR functions)
VCR/TV
(For TV or VCR mode)
PLAY
(Plays a tape)/
FAST FORWARD/SEARCH
(Fast forwards tape/ forward
visual search)
REWIND/SEARCH
(Rewinds tape/ reverse visual
search)
STOP
(Stops tape)
Remote keys
PLAY, STOP, REW, and FF
function as
operation keys when menus
are displayed.
ACTION
(Displays menu)
COUNTER RESET
(Resets counter to zero)
PAUSE/SLOW
(Displays still, frame by frame,
or slow motion picture)
SAP/Hi-Fi
(Selects audio mode for play
or record)
VOLUME UP/DOWN
(Adjusts TV volume)
Light Tower Universal Remote Control
LIGHT button: When pressed, available buttons light and selected mode button (TV, VCR, or
EJECT button: Press to eject tape. EJECT is not available during recording.
Multi Function Display (FRONT DISPLAY)
Power Indicator
Lights up when power is on.
Clock/ Status/ Channel/ Speed Display
Displays the current time. Briefly displays VCR
status when a function button is pressed.
Briefly displays the channel number, or "L1" or "L2"
when a channel or line input is selected.
Briefly displays the recording speed when SPEED is
Montréal: 3075 Louis A. Amos, Lachine, Québec H8T 1C4 (514) 633-8684
pressed.
Toronto: 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 (905) 624-8447
Panasonic Canada Inc.
Calgary: 6835 8th Street N.E., Calgary, Alberta T2E 7H7 (403) 295-3955
Vancouver: 12111 Riverside Way, Richmond, BC V6W 1K8 (604) 278-4211
5770 Ambler Drive,
Mississauga, Ontario L4W 2T3
K
(905) 624-5010
Printed in Indonesia
www.panasonic.ca
LSQT0644A
S0203-0
- 8 -
V4623S-K (E) Basic-1 (030213).p65
1
PV-V4623S-K(E) Basic LSQT0644A FRONT
Location of Controls / Reset All VCR Memory Functions
Front View of the VCR
LIGHT
Cassette Compartment
(Illuminates the remote)
TV (mode)
(Enables TV functions)
POWER
DSS/CABLE mode
(Enables DSS/CABLE functions)
Video
INPUT
(For LINE or channel)
Input
Connector
PROGRAM
(Displays Timer Program screen)
Audio Input
NUMBER Keys
Connector
CHANNEL UP/DOWN
(Selects channel directly)
(L/R)
TRACKING/ V-LOCK
ADD/DELETE
(Adds or deletes a channel)
Multi Function Display
DISPLAY
(Displays VCR status)
TAPE POSITION
(Locates tape position)
SEARCH/ ENTER
(Sets Search System /TV channel)
Rear View of the VCR
MOVIE ADVANCE
(Set MOVIE ADVANCE)
AC Power Plug
SPEED
While plugged into an AC outlet,
(Changes tape speed)
the VCR consumes 3.0 W of
COMMERCIAL ADVANCE/
electrical power in off condition.
ZERO SEARCH
(Set COMMERCIAL ADVANCE/
Zero search)
RECORD
Video Input Connector
(Records a program, etc.)
CHANNEL UP/DOWN
TRACKING/ V-LOCK
(Selects channel/ reduces
picture noise during Play and
Slow mode)
DSS CABLE) flashes 5 seconds. If no button is pressed, light goes out in 5
seconds. Also, hold down a button to confirm the selected mode (mode button
Video Output
flashes) in the dark.
Connector
Reset All VCR Memory Functions
Use when moving VCR to new location, or if a mistake was made in the Initial Setup
section (return to Factory Setting).
Timer Indicator
Lights up when the VCR is set for a Timer
• Make sure a tape is not inserted in the VCR.
Recording, or when One Touch Recording
(OTR) is used.
Flashes when a Timer Recording is set, but a
tape has not been inserted into the VCR.
VCR Indicator
Lights up when the
VCR/TV selector is
1
2
set to VCR.
Hi-Fi Indicator
Lights up when Hi-Fi audio is
monitored in Playback Mode.
Note to CABLE system installer
This reminder is provided to call the CABLE system installer's attention to Article 820-40 of the
NEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for
proper grounding and, in particular, specifies that the cable ground shall be connected to the
grounding system of the building, as close to the point of cable entry as practical.
- 9 -
Reset Language, Channels, Clock, VCR's Output Channel
Press ACTION*
VCR
C / A
CLOCK
CH
REPEAT PLAY
: OFF
REMOTE WARNING
: ON
to display MENU.
AUTO SHUT- OFF
: OFF
AUTO VCR/TV
: ON
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH : 3
STOP/EJECT
SELECT :
EXIT
: ACT I ON
PLAY
Language
Channels
Clock
1) Press
to select
1) Press
to select
1) Press
language item.
CHANNEL.
CLOCK.
FAST
FORWARD/
VCR
C / A
CLOCK
CH
VCR C / A CLOCK
CHANNEL
VCR
REPEAT PLAY
: OFF
ANTENNA : CABLE
AUTO CLOCK SET
SEARCH
REMOTE WARNING
: ON
AUTO SET
MANUAL
AUTO SHUT- OFF
: OFF
WEAK SIGNAL DISPLAY : OFF
TIME ZONE ADJUST : 0
AUTO VCR/TV
: ON
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH : 3
REWIND/
SELECT :
SET :
SELECT :
SELECT :
EXIT
: ACT I ON
EXIT
: ACT I ON
EXIT
SEARCH
2) Press
repeatedly.
2) Press
to select
2) Press
Remote
RECORD
"ANTENNA," then
"MANUAL," and press
Sensor
VCR
C / A
CLOCK
CH
REPEAT PLAY
: OFF
press
to set
. (For Auto Clock Set,
REMOTE WARNING
: ON
your antenna system
select "AUTO CLOCK
AUTO SHUT- OFF
: OFF
AUTO VCR/TV
: ON
IDIOMA/LANGUE : ENGLISH
("TV" or "CABLE.")
SET.")
VCR' S OUTPUT CH : 3
VCR C / A CLOCK
CHANNEL
VCR
SELECT :
SET :
EXIT
: ACT I ON
ANTENNA : CABLE
AUTO CLOCK SET
AUTO SET
MANUAL
WEAK SIGNAL DISPLAY : OFF
For English
TIME ZONE ADJUST : 0
VCR
C / A
RELOJ
CA
REPETICION
:INACT
SELECT :
SET :
SELECT :
AVISO/CONT.REMOTO
:ACT
EXIT
: ACT I ON
EXIT
APAGADO AUTOMATICO :INACT
VCR/TV AUTO
:ACT
3) Press
to select
("TIME ZONE ADJUST"
LANGUE/LANGUAGE:ESPAÑOL
CANAL DE SALIDA :3
"AUTO SET," then
appears only when
ELEGIR
:
FIJAR :
press
.
auto clock is set.)
SAL I R
: ACT I ON
For Spanish
• If you use Cable
VCR
Audio Input Connector
Box, set it to the
6 /08 / 20 0 3 SUN
MAGNETO. C / A
HORL.
CA
PBS channel in your
(L/R)
REPRISE LECTURE
: NON
MESSAGE D' ERREUR : OUI
time zone.
COUPURE AUTO
: NON
SELECT HOUR
MAGNETO. /TELE AUTO : OUI
SELECT :
LANGUAGE/IDIOMA : FRANÇAIS
VCR C / A CLOCK
CHANNEL
CA SORTIE : 3
EXIT
VHF/UHF Antenna
SEL.
:
REGLER:
3) Press
QUITTER : ACT I ON
Input Terminal
to select and set
For French
CH AUTO SET PROCEEDING
the date, time, and
3) Press ACTION to exit.
CANCEL : STOP
DST (Daylight
Saving Time).
• After Channel Auto
AUDIO
IN FROM ANT.
Set is finished, Auto
4) Press ACTION to
R
Clock Set will be
start the Clock and
L
VHF/UHF
VHF/UHF Antenna
performed.
exit this mode.
VIDEO
OUT TO TV
Output Terminal
IN 1
OUT
Audio Output
VCR's Output Channel
Connector (L/R)
1) Press
to select
"VCR'S OUTPUT CH."
Add or Delete a Channel
VCR
C / A
CLOCK
CH
REPEAT PLAY
: OFF
REMOTE WARNING
: ON
To add channel:
AUTO SHUT- OFF
: OFF
AUTO VCR/TV
: ON
Select channel with NUMBER keys and
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH : 3
press ADD/DLT.
SELECT :
SET :
EXIT
: ACT I ON
2) Press
.
VCR
C / A
CLOCK
CH
IF YOU PRESS ACTION
KEY, VCR ' S OUTPUT CH
SWITCHES TO CH 4.
1
Turn VCR Power on.
To delete channel:
Select channel with CH
keys and press ADD/DLT.
3) Press ACTION.
2
Press and hold both PLAY and
VCR
C / A
CLOCK
CH
CHANNEL
on the VCR for more
PLEASE TUNE YOUR TV TO
than 5 seconds.
CH 4.
• The power shuts off.
3
Do "Initial Setup (Ready to Play)"
After 3 seconds
DST (Daylight Saving Time)
on page 4.
VCR
C / A
CLOCK
CH
REPEAT PLAY
: OFF
REMOTE WARNING
: ON
VCR auto adjusts clock for DST.
AUTO SHUT- OFF
: OFF
AUTO VCR/TV
: ON
Spring (First Sunday in April)
IDIOMA/LANGUE : ENGLISH
VCR' S OUTPUT CH : 4
DST:ON ➛ Sets clock ahead one hour.
SELECT :
SET :
EXIT
: ACT I ON
Autumn (Last Sunday in October)
DST:ON ➛ Turns clock back one hour.
• To Make Corrections,
• If your area does not observe Daylight
repeat steps 1) ~ 3).
Saving Time, select DST:OFF.
• Keep these time changes in mind when
programming VCR for timer recordings.
*Important: If a remote control button does not work when pressed,
press the VCR button on the remote and try the button again.
- 10 -
- 11 -
2003/02/13, 11:08
Limited Warranty
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario L4W 2T3
PANASONIC PRODUCT – LIMITED WARRANTY
Panasonic Canada Inc. warrants this product to be free from defects in
Time Zone
material and workmanship and agrees to remedy any such defect for a
Adjust
to select
period as stated below from the date of original purchase.
(Only when Auto
VHS Video Cassette Recorder – One (1) year, parts and labour
Clock is set.)
C / A
CLOCK
CH
LIMITATIONS AND EXCLUSIONS
1) Press
to select
This warranty does not apply to products purchased outside Canada or to
CLOCK.
any product which has been improperly installed, subjected to usage for
VCR
C / A
CLOCK
CH
AUTO CLOCK SET
which the product was not designed, misused or abused, damaged during
: ACT I ON
MANUAL
TIME ZONE ADJUST : 0
shipping, or which has been altered or repaired in any way that affects the
to select
reliability or detracts from the performance, nor does it cover any product
SELECT :
EXIT
: ACT I ON
which is used commercially. Dry cell batteries are also excluded from
2) Press
to select
coverage under this warranty.
"TIME ZONE
This warranty is extended to the original end user purchaser only.
C / A
CLOCK
CH
ADJUST"
A purchase receipt or other proof of date of original purchase is required
VCR
C / A
CLOCK
CH
before warranty service is performed.
AUTO CLOCK SET
MANUAL
TIME ZONE ADJUST : 0
THIS EXPRESS, LIMITED WARRANTY IS IN LIEU OF ALL OTHER
SET :
: ACT I ON
WARRANTIES, EXPRESS OR IMPLIED, EXCLUDING ANY IMPLIED
SELECT :
SET :
EXIT
: ACT I ON
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
and press
to
PARTICULAR PURPOSE.
subtract or add
IN NO EVENT WILL PANASONIC CANADA INC. BE LIABLE FOR ANY
hour(s) as necessary.
C / A
CLOCK
CH
SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES.
SUN 2 2 : --PM
3) Press ACTION.
DST:ON
In certain instances, some jurisdictions do not allow the exclusion or
• "TIME ZONE
limitation of incidental or consequential damages, or the exclusion of implied
ADJUST" returns to
SET :
: ACT I ON
"0" if clock is set
warranties, so the above limitations and exclusions may not be applicable.
manually.
and
WARRANTY SERVICE
For product operation and information assistance, please contact your
Dealer or our Customer Care Centre at:
Telephone #:
Fax #:
Web:
(905) 624-5505
(905) 238-2360
www.panasonic.ca
For product repairs, please contact one of the following:
• Your Dealer who will inform you of an authorized Servicentre nearest you.
• Our Customer Care Centre at (905) 624-5505 or www.panasonic.ca
• A Panasonic Factory Servicentre listed below:
Richmond, British
Calgary, Alberta
Mississauga, Ontario
Columbia
Panasonic Canada
Panasonic Canada Inc.
Panasonic Canada Inc.
Inc.
5770 Ambler Dr.
12111 Riverside Way
6835-8
th
St. N. E.
Mississauga, ON L4W
Richmond, BC V6W 1K8
Calgary, AB T2E 7H7
2T3
CHANNEL 08 ADDED
Tel: (604) 278-4211
Tel: (403) 295-3955
Tel: (905) 624-8447
Fax: (604) 278-5627
Fax: (403) 274-5493
Fax: (905) 238-2418
Lachine, Québec
Panasonic Canada Inc.
/
or NUMBER
3075, rue Louis A. Amos
Lachine, QC H8T 1C4
Tel:
(514) 633-8684
CHANNEL 08 DELE TED
Fax: (514) 633-8020
IF YOU SHIP THE PRODUCT TO A SERVICENTRE
Carefully pack and send prepaid, adequately insured and preferably in the
original carton. Include details of the defect claimed, and proof of date of original
purchase.
- 12 -
Video Cassette Recorder
Operating Instructions
(Basic Operations)
For advanced operations, see the separate
"Advanced Operations" instruction book.
PV-V4623S-K
Models No.
Table of Contents
Note
Important Safeguards and Precautions .................... 2
Before Using ............................................................ 3
Connections and Initial Setup (Ready to Play) ......... 4
Playback / Record on a Tape ................................... 5
Timer Recording ................................................... 6, 7
Location of Controls ........................................... 9, 10
Reset All VCR Memory Functions .......................... 10
Reset Language, Channels, Clock, VCR's Output Channel
.. 11
Limited Warranty .................................................... 12
E
S
®
As an
NERGY
TAR
Participant,
Panasonic has determined that this product or
E
S
product model meets the
NERGY
TAR
®
guidelines for energy efficiency.
Please read these instructions carefully before attempting to connect,
operate or adjust this product. Please save this manual.
LSQT0644A
Advertisement
Table of Contents
Related Manuals for Panasonic PV-V4623S-K
Summary of Contents for Panasonic PV-V4623S-K
- Page 1 (Illuminates the remote) SELECT : EXIT : ACT I ON Video Cassette Recorder POWER PLAY Panasonic Canada Inc. warrants this product to be free from defects in TV (mode) (Turns VCR off/on) Language Channels Clock Time Zone material and workmanship and agrees to remedy any such defect for a...
- Page 2 V-Lock control. setup and perform settings manually. (See p. 11.) - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - V4623S-K (E) Basic-2 (030213).p65 2003/02/13, 11:09 PV-V4623S-K(E) Basic LSQT0644A REAR...
-
Page 3: Copying Your Tapes (Dubbing)
(CYLINDER) continues to rotate... rotate for about 3 minutes. This reduces response channels on VCR” sections (see p. 5 of Basic Panasonic has determined that this product or USE VCR : VCR KEY (about 4 sec.) when LINE1 or LINE2 is time from Stop to Play mode and from Play to Rewind Operations book). - Page 4 Yes. marked recordings will play in non- IN 1 O U T equipment is selection. Panasonic .......... 16, 17, 97, 109 Vidtek ..............64 Select “NORMAL” stop at the last point non- VCRs? VCRs, but commercials will not be advanced through.
-
Page 5: Emplacement Des Commandes
Réglage du canal de sortie sur une touche, la touche du mode d’opération sélectionné clignote (ce qui permet de • notre service à la clientèle au (905) 624-5505 ou www.panasonic.ca ; Ajout ou suppression d’un canal. confirmer le mode de fonctionnement dans l’obscurité). - Page 6 Tout changement ou modification apportée sans autorisation préalable annule le droit d’utiliser l’appareil. (Voir la page 11.) - 2 - - 3 - - 4 - - 5 - - 6 - - 7 - V4623S-K Ba-2 (F) (030213).p65 2003/02/13, 11:32 PV-V4623S-K(F) Basic LSQT0657A REAR...
-
Page 7: Guide De Dépannage
Nota • La duplication de cassettes protégées (CÂBLE) insérée à fond dans la prise secteur. Panasonic assure que cet appareil, ou ce modèle, contre la copie donne de mauvais LIGNE2 LIGNE1 Nota satisfait aux normes d’efficacité énergétique du La cassette est éjectée au début... -
Page 8: Fonction De Commande Multimarque
Le marquage peut-il nuire à d’autres Non. Si l’intervalle entre 2 enregistrements programmés ou plus • effectuer un MAGNETO./TELE AUTO : OUI Panasonic ..........16, 17, 97, 109 Vidtek ................64 canal, y compris LANGUAGE/IDIOMA : FRANÇAIS puis appuyer sur pour messages publicitaires n’est pas désiré.