hit counter script
Panasonic PV-V462 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. VCR
  5. PV-V462
  6. Service manual
Panasonic PV-V462 Service Manual

Panasonic PV-V462 Service Manual

Hide thumbs Also See for PV-V462:
Table of Contents

Advertisement

Quick Links

Download this manual
ORDER NO. MKE0201001C1
B3
Video Cassette Recorder
PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K /
PV-V4522-K / PV-V4612-K
SPECIFICATIONS
2002 Matsushita Kotobuki Electronics Industries Ltd. All rights

Advertisement

Table of Contents
loading

Related Manuals for Panasonic PV-V462

Summary of Contents for Panasonic PV-V462

  • Page 1 ORDER NO. MKE0201001C1 Video Cassette Recorder PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K SPECIFICATIONS 2002 Matsushita Kotobuki Electronics Industries Ltd. All rights...
  • Page 2 reserved. Unauthorized copying and distribution is a violation of law. 1. SAFETY PRECAUTIONS GENERAL GUIDELINES 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List.
  • Page 3 2. Measure the resistance value, with an ohmmeter, between the jumpered AC plug and each exposed metallic cabinet part on the equipment such as screwheads, connectors, control shafts, etc. When the exposed metallic part has a return path to thechassis, the reading should be between 1 M and 5.2 M .
  • Page 4 (ESD) TO ELECTROSTATICALLY SENSITIVE (ES) DEVICES Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits, some field-effect transistorsand semiconductor "chip" components.
  • Page 5 8. Minimize bodily motions when handling unpackaged replacement ES devices. (Otherwise harmless motion such as the brushing together of your clothes fabric or the lifting of your foot from a carpeted floor can generate static electricity (ESD)sufficient to damage an ES device). "NOTE to CATV system installer: This reminder is provided to call the CATV system installer’s attention to Article 820-22 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable...
  • Page 6 Fig. 1-4 Fig. 1-5...
  • Page 7 3. When 1 to 4 listed in Lock code occurs, Lock data will be stored in the Memory IC (latest Lock data only). Note: 1. Lock data will be kept after the AC Cord is unplugged. 2. When 1 to 4 listed in Lock code occurs for the first time, the VCR does not go into VCR shut-off condition.
  • Page 8 Note: 1. After replacing the Cylinder Unit, press COUNTER RESET button on remote in this mode. Total elapsed "Cylinder rotation" time (in hours) will be cleared to 0. 2. To release from Usage Screen Mode, press any operation button on VCR or insert a cassette tape in this mode. The VCR will return to normal operation mode.
  • Page 9 4.1.4.1.3. Service Position (2-2) (Wide Frame Model) Fig. 3-2-2 Note: 1. It is possible that the S-Tab SW. may not work correctly in Service Position (2-1), (2-2). (Recording can not be done). In this case, short the S-Tab SW. Pins on the foil side of the Main C.B.A. to turn this SW.
  • Page 10 2. Place the tape between the Cassette Up Ass’y and Main C.B.A. to get a stability. Fig. 3-4 4.1.5. HOT CIRCUIT Primary circuit exists on the Main C.B.A. This circuit is identified as "HOT" on the C.B.A. and in the Service Manual. Use extreme care to prevent accidental shock when servicing.
  • Page 11 To release from this mode, press POWER button off or disconnect AC Plug. 4.1.7. TRACKING CENTER MODE (TRACKING FIX AT CENTER) Insert the Cassette tape. Set the unit into Service Mode. Play back the Cassette tape. Press PLAY button in Play back mode. "TRACKING CENTER" will be displayed on the TV monitor. In this mode, the tracking is fixed at center.
  • Page 12 4.1.9. METHOD FOR LOADING/UNLOADING OF MECHANISM 4.1.9.1. (Manual Method) Turn the Loading Gear clockwise (for loading) or counterclockwise (for unloading) using needlenose pliers etc. Note: Do not use this method if Mechanism is jammed or locked. Fig. 6-1 4.1.9.2. (Electrical Method) Apply +10.0 V DC Power Supply to the Loading Motor terminals.
  • Page 13 4.1.9.2.1. WHEN LOADING WITHOUT A CASSETTE When loading without a cassette, push Portion "a" on the Holder Unit of Cassette Up Ass’y so that the Lever clear the First Tab and Second Tab. Fig. 6-3 4.1.10. HOW TO REMOVE A JAMMED TAPE CAUTION: Wiper Arm Unit may be damaged or its spring may be out of place when the jammed tape is removed by force.
  • Page 14 2. Remove the tape from the tape path. 3. Rewind the tape into the cassette by rotating the Center Clutch Unit counterclockwise. 4. Unhook Spring (A) of the Drive Rack Arm. 5. Remove Screw (A). 6. Lift the Cassette Up Ass’y. While pulling the Cassette Up Ass’y out far enough so that it clears the Drive Rack Arm, slide the Drive Rack Unit as indicated by the arrow to remove the cassette tape from the Cassette Up Ass’y.
  • Page 15 1. Perform Step 2 through Step 7 of Method -1. Note: After repairing mechanical trouble, make sure that all gear alignments are correct, especially the Wiper Arm Unit and Drive Rack Unit of Cassette Up Ass’y. (Refer to "EJECT Position Confirmation"in DISASSEMBLY/ASSEMBLY PROCEDURES.) 4.1.10.2.
  • Page 16 4.1.11. BLACK SCREWS ON THE CHASSIS Black Screws are used on the Mechanism Chassis to identify screws that require adjustment. 4.1.12. HOW TO RESET ALL VCR MEMORY FUNCTIONS To reset (clear) the select language, channel auto set and set clock functions to their initial power on condition (power on, no cassette inserted), hold down the PLAY and CH UP buttons on the unit together for more than 5 seconds.
  • Page 17 Figure...
  • Page 18 5.1.1.1. Notes in chart 1. Installation of Top Cover Install the Top Cover front portion at a downward angle so that the tab on the Front Panel Ass’y fits into the hole in the Top Cover. Then, lower the rear portion into place and tighten 2 Screws (447). 2.
  • Page 19 Opener Lever may be damaged when Front Panel Ass’y is installed, with Cassette Door-Lid of Front Panel Ass’y and Opener Lever of Cassette Up Ass’y set incorrectly. A. When installing the Front Panel Ass’y, swing the Cassette Door- Lid all the way open until the Cassette Door tab clears the Opener Lever.
  • Page 20 B. Install the Mechanism Chassis and Cassette Up Ass’y straight onto the Main C.B.A. so that the Sensor LED clears the hole in the Mechanism Chassis and that 2 Connectors (P4001, P6201) are aligned and seated securely. 5. Flat Cable solder points on the Cylinder and AC Head Solder the Flat Cables.
  • Page 21 C. Hook Spring to the Drive Rack Arm on the Mechanism Chassis. 5.2. MECHANISM SECTION 5.2.1. Disassembly/Reassembly Method 5.2.2. Inner Parts Location Fig. J1-1...
  • Page 22 5.2.3. EJECT Position Confirmation Fig. J1-2...
  • Page 23 5.2.4. Full Erase Head and Cylinder Unit Fig. J2 5.2.4.1. Reassembly Notes 1. After replacing the Cylinder Unit, clear the Total elapsed "Cylinder rotation" time (in hours) to 0. Refer to "USAGE SCREEN MODE" in...
  • Page 24 SERVICE NOTES. 5.2.5. Capstan Belt, Support Angle, Intermediate Gear B, and Main Cam Gear Fig. J3-1 5.2.5.1. Reassembly Notes 1. Alignment of Main Cam Gear, Drive Rack Arm, and Main Rod A. Confirm that the hole on Main Rod is a Through Hole with a hole on chassis.
  • Page 25 2. Confirmation/Alignment of Intermediate Gear B, Main Cam Gear, and Intermediate Gear A A. Confirm that the Hole A on Lift Gear is a Through Hole with a hole on chassis. B. Confirm that the hole on Intermediate Gear A is aligned with the hole on Lift Gear.
  • Page 26 Hole with Hole A on Support Angle in EJECT mode. The each mode Hole on Main Cam Gear should be a Through Hole with Hole B on Support Angle in each mode. Fig. J3-5 4. Main Cam Gear Kit A. Main Cam Gear is supplied as a Main Cam Gear Kit only (Kit No.
  • Page 27 Fig. J4-1 5.2.6.1. Reassembly Notes 1. Installation of Center Clutch Unit A. Fit the Center Clutch Unit into the Changing Gear. Fig. J4-2 5.2.7. Reel Gear, Main Rod, and SS Brake Arm Unit Fig. J5-1...
  • Page 28 5.2.7.1. Reassembly Notes 1. Alignment of Main Rod and T Loading Arm Unit A. Align the Gear on T Loading Arm Unit with Gear of Main Rod. Confirm that the Hole on Main Rod is a Through Hole with a hole on chassis.
  • Page 29 5.2.9. T Loading Arm Unit and S Loading Arm Unit Fig. J7-1 5.2.9.1. Reassembly Notes 1. Alignment of T Loading Arm Unit and S Loading Arm Unit A. Install the S Loading Arm Unit onto the chassis. B. Install the T Loading Arm Unit so that the hole on T Loading Arm Unit is aligned with the hole on S Loading Arm Unit.
  • Page 30 5.2.10. T Brake Unit, Tension Control Arm Unit, T Reel Table, S Reel Table, and Tension Arm Unit Fig. J8-1 5.2.10.1. Reassembly Notes 1. How to distinguish between S Reel Table and T Reel Table Fig. J8-2...
  • Page 31 5.2.11. Loading Post Base -T Unit and Loading Post Base -S Unit Fig. J9 5.2.12. Opener Piece, Drive Rack Arm, Pinch Arm Unit, P5 Arm Unit, and Intermediate Gear A Fig. J10-1...
  • Page 32 Note: In early units, a washer is used. When servicing the washer or the P5 Arm Unit, replace only the P5 Arm Unit with a new one, and remove the washer. 5.2.12.1. Reassembly Notes 1. Installation/Alignment of Intermediate Gear A, Lift Gear and P5 Arm Unit A.
  • Page 33 5.2.13. Motor Block Unit, Audio Control Head Unit, Lift Gear, Tension Arm Boss, and Cleaner Arm Unit Fig. J11 5.3. CASSETTE UP ASSEMBLY SECTION 5.3.1. Top Plate, Wiper Arm Unit, and Holder Unit Fig. K1-1...
  • Page 34 5.3.1.1. Reassembly Notes 1. Alignment of Wiper Arm Unit and Drive Rack Unit A. Slide the Drive Rack Unit to the far right as indicated by the arrow. B. Install the Wiper Arm Unit so that the hole on the Wiper Arm Unit is aligned with the hole on the Drive Rack Unit.
  • Page 35 2. Installation of Holder Unit A. Turn the Wiper Arm Unit so that the grooves on each end are aligned with the each groove on Side Plate L and R. B. Insert Holder Unit boss (A) and (B) into the grooves as shown in Fig.
  • Page 36 5.3.2. Opener Lever and Drive Rack Unit Fig. K2 6. ADJUSTMENT PROCEDURES 6.1. SERVICE FIXTURES AND TOOLS 6.2. MECHANICAL ADJUSTMENT 6.2.1. CLEANING PROCEDURE FOR THE UPPER CYLINDER UNIT 1. While slowly turning the Upper Cylinder Unit counterclockwise by hand, gently rub the Video Heads with a Head Cleaning Stick (VFK27) moistened with Ethanol.
  • Page 37 Note: 1. Do not rub vertically or apply excess pressure to the Video Heads. Do not turn the Upper Cylinder Unit clockwise while cleaning. 2. After cleaning, use a Dry Head Cleaning Stick (VFK27) to remove any Ethanol remaining on the cylinder tape path. Otherwise, tape damage will occur.
  • Page 38 3. If the reading is out of specification, make sure that there is no dust or foreign material between the Brake Pad of Tension Control Arm Unit and the S Reel Table. After cleaning, the reading of tension measurement is still out of specification, replace the Tension Arm Unit and the Tension Control Arm Unit.
  • Page 39 VHS Alignment Tape (VFMS0003H6) Post Adjustment Driver (VFK0329) H-Position Adjustment Driver (VFK0330) 6.2.2.2.1. ENVELOPE OUTPUT ADJUSTMENT The height of the P2 and P3 Posts replacement part is preadjust at the factory. Purpose: To achieve a satisfactory picture and secure precise tracking. Symptom of Misadjustment: If the envelope is output poorly, much noise will appear in the picture.
  • Page 40 1. Release the Tracking center mode. 2. Press the Tracking Control Up or Down button on remote control. Make sure that the envelope waveform remains flat. If not, readjust P2 and/or P3 post heights. Fig. M3-1 Fig. M3-2 7. After adjustment, confirm that the tape travels without curling at P2 and P3 posts.
  • Page 41 will eventually be damaged. An intermittent Blue screen may be seen in Playback. 1. Play back a T120 cassette tape and check that the tape travels smoothly between the upper and lower guides of the P4 post. 2. If necessary, adjust Black Screw (B) clockwise until the tape begins to curl at the lower edge of the P4 post.
  • Page 42 6.2.2.2.4. AUDIO CONTROL HEAD AZIMUTH ADJUSTMENT Purpose: To adjust the position and height of the Audio Control Head so that it meets the tape tracks properly. Symptom of Misadjustment: If the position of the Audio Control Head is not properly adjusted, the Audio S/N Ratio is poor.
  • Page 43 If the Horizontal Position of the Audio Control Head is not properly adjusted, a maximum envelope cannot be obtained at the Neutral Position of the Tracking Control Circuit. 1. Insert the alignment tape. 2. Press and hold FF button and CH DOWN buttons on VCR together over 5 seconds in power off condition.
  • Page 44 adjusted by using " On Screen Display " and the remote control instead of adjusting mechanical controls (VR). 6.3.2. TEST EQUIPMENT To do all of these electrical adjustments, the following equipment is required. 1. Dual-Trace Oscilloscope Voltage Range: 0.001 V to 50 V/Div. Frequency Range: DC to 50 MHz Probes: 10:1, 1:1 2.
  • Page 45 T = 6 H±0.5 H (0.38 ms±0.03 ms) Mode : SP Playback Equipment : Oscilloscope, VHS Alignment Tape (VFMS0003H6), TV monitor 1. Insert the VHS Alignment Tape. Then turn off the power. Enter service mode by pressing and holding FF and CH DOWN buttons on VCR together for more than 5 seconds in power off condition.
  • Page 46 5. After adjustment is completed, press REC button on the remote control. Then " COMP " will appear on the TV monitor and adjusted value will be written to Memory IC (IC6005). Fig.E2-3 6. Press STOP button on the remote control to release from EVR PG SHIFTER ADJUSTMENT MODE.
  • Page 47 7.4. SIGNAL WAVEFORMS 8. CIRCUIT BOARD LAYOUT 8.1. MAIN C.B.A. 9. BLOCK DIAGRAMS 9.1. OVERALL BLOCK DIAGRAM (Model: PV-V4022-K) 9.2. OVERALL BLOCK DIAGRAM ( Models: PV-V4522-K, PV-V462, PV- V4602 , PV-V4612S, PV-V4612-K, PV-V4622) 10. EXPLODED VIEWS 10.1. MECHANISM (TOP) SECTION...
  • Page 48 1.6A 125/250V TYPE 1.6A 125/250V USE ONLY THE SPECIFIED PARTS. PV-V4022-K NOTE: CIRCUIT BOARD LAYOUT INCLUDES COMPONENTS WHICH ARE NOT USED. PV-V4522-K HOT CIRCUIT. BE CAREFUL AND USE AN ISOLATION TRANSFORMER WHEN SERVICING. PV-V462 PV-V4602 P3503 P3504 P3502 P3501 C4205 D4201...
  • Page 49 OVERALL BLOCK DIAGRAM REC VIDEO SIGNAL PB VIDEO SIGNAL REC AUDIO SIGNAL PB AUDIO SIGNAL MAIN C.B.A. CYLINDER UNIT P3501 VIDEO SP L HEAD IC3001 (VIDEO/AUDIO PROCESS / HEAD AMP) VIDEO SP R HEAD TUNER VIDEO VIDEO SIGNAL PROCESS HEAD AMP VIDEO IN2 VIDEO IN1 VIDEO LP/SLP L HEAD...
  • Page 50 LED ON(H) LED DRIVE TAKEUP PHOTO TR TAKEUP PHOTO TR(L) (WITH LED DISPLAY) Q6009 SUPPLY PHOTO TR SUPPLY PHOTO TR(L) KEY DATA KEY SWITCH KEY DATA SEFETY TAB BROKEN(H) SW6001 IR DATA IR RECEIVER SAFETY TAB SW PV-V4522-K/PV-V462/PV-V4602/PV-V4612S/PV-V4612-K/PV-V4622 OVERALL BLOCK DIAGRAM...
  • Page 51 Example: MODEL MARK The connections between C.B.A.s are shown below. PV-V4022-K PV-V4522-K PV-V462 Ref. No. of the connection parts such as lead cable, PV-V4602 flexible cable which is supplied as a replacement parts. PV-V4612S PV-V4612-K The Number of pins of the Connector.
  • Page 52 (SW6301, 6303, 6304, 6305, 6306, 6307, 6312, 6314, 6316) KEY VOLTAGE CHART (SW6303, 6304, 6305, 6306, 6311, 6314, 6315, 6317) In later units, MN101D09EPA is used for Microcontroller IC (IC6001). TERMINAL TERMINAL TERMINAL PV-V462 0.6V 0.7V 1.9V 2.0V 3.1V 3.2V 4.4V...
  • Page 53 REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK PV-V4022-K PV-V4522-K I/O CHART OF IC6001 IC6001 SERVO BLOCK CAPSTAN MOTOR ASS’Y PV-V462 PV-V4602 DIAGRAM PV-V4612S NOTE: CAPSTAN MOTOR ASS'Y (REF. NO. 46) IS SUPPLIED AS A UNIT ONLY. PV-V4612-K Pin No. I/O...
  • Page 54 Do not use the part number on this diagram. REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK PV-V4022-K PV-V4522-K REC VIDEO SIGNAL PB VIDEO SIGNAL REC AUDIO SIGNAL PB AUDIO SIGNAL CAPSTAN SERVO PV-V462 PV-V4602 PV-V4612S PV-V4612-K JK3002 AUDIO PV-V4622 B,C,D,E,F,G VIDEO Not used L3016...
  • Page 55 COLOR KILLER 629KHz DETECTOR 1/40 COMB CHROMA LP/SLP FREQUENCY 4Phase PHASE Trap COMB select COMPENSATOR Busrst up/down LP/SLP ROTARY Side 4.8MHz 3.58MHz COMPOSITE Lock TRAP LP/SLP COMPONENT SP/LP 2FSC COMPONENT PB AMP -OFF COMPOSITE PV-V4022-K/PV-V4522-K/PV-V462 /PV-V4602/PV-V4612S/PV-V4612-K/PV-V4622 IC3001 DETAIL BLOCK DIAGRAM...
  • Page 56 OF MODELS & MARKS Do not use the part number on this diagram. REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK PV-V4022-K PV-V4522-K PV-V462 U6301 LSSZ0001 (DISPLAY TUBE UNIT) U6301 LSSZ0002 (LED DISPLAY UNIT) U6301...
  • Page 57 OF MODELS & MARKS Do not use the part number on this diagram. REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK PV-V4022-K REC AUDIO SIGNAL PB AUDIO SIGNAL PV-V4522-K PV-V462 PV-V4602 PV-V4612S PV-V4612-K PV-V4622 Not used J4201 C4921 C4229 R4227 0.01...
  • Page 58 OF MODELS & MARKS Do not use the part number on this diagram. REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK PV-V4022-K PV-V4522-K PV-V462 PV-V4602 PV-V4612S PV-V4612-K IMPORTANT SAFETY NOTICE: PV-V4622 CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, COMPONENTS IDENTIFIED BY THE SIGN...
  • Page 59 OF MODELS & MARKS Do not use the part number on this diagram. REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK PV-V4022-K PV-V4522-K PV-V462 PV-V4602 PV-V4612S REC VIDEO SIGNAL PB VIDEO SIGNAL PV-V4612-K REC AUDIO SIGNAL PB AUDIO SIGNAL...
  • Page 60 Do not use the part number on this diagram. REFER TO BEGINNING OF SCHEMATIC SECTION. MODEL MARK WHEN REPLACING ANY OF THESE COMPONENTS, PV-V4022-K USE ONLY THE SPECIFIED PARTS. PV-V4522-K PV-V462 PV-V4602 PV-V4612S PV-V4612-K MAIN C.B.A. CAPSTAN MOTOR ASS'Y LOADING MOTOR FULL ERASE HEAD...
  • Page 61 PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K 7.2. MAIN SCHEMATIC DIAGRAMS MAIN I (SYSTEM CONTROL/ SERVO) SCHEMATIC DIAGRAM KEY VOLTAGE CHART (SW6303, 6304, 6305, 6310, 6311, 6314, 6315, 6317) KEY VOLTAGE CHART (SW6301, 6303, 6304, 6305, 6306, 6307,...
  • Page 62 EY VOLTAGE CHART (SW6301, 6303, 6304, 6305, 6306, 6307, 6312, 6314, 6316) KEY VOLTAGE CHART (SW6303, 6304, 6305, 6306, 6311, 6314, 6315, 6317) In later units, MN101D09EPA is used for Microcontroller IC (IC6001). TERMINAL TERMINAL PV-V462 0.6V 0.7V 1.9V 2.0V 3.1V 3.2V 4.4V...
  • Page 63 PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K MAIN II (SIGNAL PROCESS/AUDIO) SCHEMATIC DIAGRAM REC VIDEO SIGNAL PB VIDEO SIGNAL REC AUDIO SIGNAL PB AUDIO SIGNAL CAPSTAN SERVO L3016 R3019 R3020 L3101 100U C3109 R3025 R3026 100/6.3V...
  • Page 64 OF MODELS & MARKS REFER TO BEGINNING OF SCHEMATIC SECTION. Do not use the part number on this diagram. MODEL MARK PV-V4022-K PV-V4522-K PV-V462 PV-V4602 PV-V4612S PV-V4612-K JK3002 AUDIO PV-V4622 B,C,D,E,F,G...
  • Page 65 PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K MAIN III (OPERATION) SCHEMATIC DIAGRAM U6301 LSSZ0001 (DISPLAY TUBE UNIT) U630 TYPE 01-A LED TIMER Hi-Fi W/TYPE 01-A LED Q6603 (SWITCHING) R6677 R6678 TP63 TP63 R6676 R6679...
  • Page 66 OF MODELS & MARKS REFER TO BEGINNING OF SCHEMATIC SECTION. Do not use the part number on this diagram. MODEL MARK PV-V4022-K PV-V4522-K PV-V462 PLAY TUBE UNIT) U6301 LSSZ0002 (LED DISPLAY UNIT) U6301 B3CKS0000001 (DISPLAY TUBE UNIT)
  • Page 67 MAIN IV (Hi-Fi) SCHEMATIC DIAGRAM (B,C,D,E,F,G) REC AUDIO SIGNAL PB AUDIO SIGNAL J4201 C4921 R4901 PT R4902 PT C4902 2R2/50V C4903 3R3/50V L4901 C4914 R4903 C4915 PT C4916 PT C4917 0.1 WF33 MTS/SA C4918 SIGNAL C4919 PROCE TP4202 C4226 R4214 C4920 0.022 R4210 1K...
  • Page 68 PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K NOTE: NOTE: For placing a purchase order of the parts, COMPARISON CHART FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, be sure to use the part number listed in the parts list.
  • Page 69 PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K MAIN V (POWER SUPPLY) SCHEMATIC DIAGRAM IMPORTANT SAFETY NOTICE: CAUTION: FOR CONTINUED PROTECTION AGAINST FIRE HAZARD, COMPONENTS IDENTIFIED BY THE SIGN HAVE REPLACE ONLY WITH THE SAME TYPE 1.6A 125/250V FUSE.
  • Page 70 OF MODELS & MARKS REFER TO BEGINNING OF SCHEMATIC SECTION. Do not use the part number on this diagram. MODEL MARK PV-V4022-K PV-V4522-K PV-V462 PV-V4602 PV-V4612S PV-V4612-K PV-V4622 Not used FETY. C1029...
  • Page 71 MAIN VI (ADVANCE) SCHEMATIC DIAGRAM (E,F,G) REC VIDEO SIGNAL PB VIDEO SIGNAL REC AUDIO SIGNAL PB AUDIO SIGNAL TP3806 TP3802 L3801 100U TO M V SW_5V_VIDEO C3801 C3802 R3821 R3815 100/6.3V 0.01 R3814 R3813 R3822 R3812 100K 100K L3802 C3816 C3830 0.15 0.056...
  • Page 72 PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K NOTE: NOTE: For placing a purchase order of the parts, COMPARISON CHART FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, be sure to use the part number listed in the parts list.
  • Page 73 PV-V462 / PV-V4602 / PV-V4622 / PV-V4612S / PV-V4022-K / PV-V4522-K / PV-V4612-K 7.3. INTERCONNECTION SCHEMATIC DIAGRAM INTERCONNECTION SCHEMATIC DIAGRAM MAIN C.B.A. FULL ERASE HEAD P6201 UHF/VHF P4001 TUNER/TV (2 Pins) DEMODULATOR UNIT UHF/VHF UHF/VHF AUDIO CONTROL/FULL ERASE HEAD UNIT...
  • Page 74 REFER TO BEGINNING OF SCHEMATIC SECTION. Do not use the part number on this diagram. MODEL MARK WHEN REPLACING ANY OF THESE COMPONENTS, PV-V4022-K USE ONLY THE SPECIFIED PARTS. PV-V4522-K PV-V462 PV-V4602 PV-V4612S PV-V4612-K CAPSTAN MOTOR ASS'Y LOADING MOTOR PV-V4622 Not used...
  • Page 75 Please read these instructions carefully before attempting to connect, operate or adjust this product. Please save this manual. Spanish Quick Use Guide is included. (Guía para rápida consulta en español está incluida.) LSQT0509A For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...

  • Page 76: Important Safeguards And Precautions

    Important Safeguards and Precautions FOR YOUR SAFETY, READ AND RETAIN OUTDOOR ANTENNA INSTALLATION ALL SAFETY AND OPERATING 1 SAFE ANTENNA AND CABLE CONNECTION INSTRUCTIONS. HEED ALL WARNINGS If an outside antenna or cable system is connected to the IN THE MANUAL AND ON THE UNIT equipment, be sure the antenna or cable system is grounded so as to provide some protection against built up static charges INSTALLATION...
  • Page 77 Safety Precautions WARNING: To prevent fire or shock hazard, do not expose this equipment to rain or moisture. CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert. Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas exposer cet appareil à...

  • Page 78: Accessories

    (Super Long Play) 2) Insert batteries as marked. 3) Close cover. Battery replacement caution • Do not mix old and new batteries. • Do not mix alkaline with manganese batteries. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...

  • Page 79: Table Of Contents

    Table of Contents Important Safeguards and Precautions ......2, 3 Accessories ................4 Loading the Batteries .............. 4 Prevent Accidental Tape Erasure .......... 4 Record/ Playback Time ............4 Location of Controls ............6, 7 Initial Setup for ANT./ Cable-VCR-TV Connection ....8, 9 Initial Setup for DSS/ Cable Box-VCR-TV Connection ...

  • Page 80: Location Of Controls

    Front View of the VCR Cassette Compartment STOP/EJECT PLAY POWER Video REWIND/ Input SEARCH Connector Audio Input RECORD FAST FORWARD/ CHANNEL Remote Connector (L/R) SEARCH Sensor TRACKING/ V-LOCK For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 81 Multi Function Display Timer Indicator Lights up when the VCR is set for Timer Recording, or when One Touch Recording (OTR) Power Indicator is used. Flashes when a Timer Recording is set, Lights up when power is on. but tape has not been inserted into the VCR TIMER VCR Indicator Hi-Fi...

  • Page 82: Initial Setup For Ant./ Cable-Vcr-Tv Connection

    “VCR’s Output Channel” on page 13. AUTO CLOCK SET WARNING When using “Nut type” RF coaxial cables, PROCEEDING tighten with fingers only. Overtightening may damage terminals. CANCEL : STOP For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 83 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Settings are made automatically. When setup is done, this screen appears. C / A CLOCK 9 /30 / 20 0 2 SUN 2 : 20PM DST : ON SELECT/ SETT I NG : CH 10...

  • Page 84: Initial Setup For Dss/ Cable Box-Vcr-Tv Connection

    TV is tuned to channel 3, try switching it to channel 4. AUTO CLOCK SET • To change VCR’s output channel, PROCEEDING please refer to “VCR’s Output Channel” on page 13. CANCEL : STOP For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 85 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Settings are made automatically. When setup is done, this screen appears. C / A CLOCK 9 /30 / 20 0 2 SUN 2 : 20PM DST : ON SETT I NG : CH 10 AUTO CLOCK SET...

  • Page 86: Reset Language, Channels, Clock, Vcr's Output Channel

    • After Channel Auto Set is Time). finished, Auto Clock Set 3) Press ACTION to will be performed. exit. 4) Press ACTION to start the clock and exit this mode. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 87 VCR’s Output Channel POWER *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. SELECT/ :PLAY :STOP :REW Time Zone Adjust VCR’s Output NUMBER Channel keys (Only when Auto Clock is set.) 1) Press to select 1) Press...

  • Page 88: Playback A Tape

    • Rew/ FF speed slows down at start and end Remove loose or portions of the tape. peeling labels from tapes Press EJECT on remote, to prevent tape jam. or STOP/EJECT on VCR to eject tape. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...

  • Page 89: Record On A Tape

    *Important: If a remote control button does not work Record on a Tape when pressed, press the VCR button on the remote and try the button again. Insert a tape with a record tab (p. 4). Ready Checklist • VCR power comes on. All connections are made (p.

  • Page 90: Timer Recording

    If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” Press POWER off appears on-screen, please reenter to set the Timer Recording. the timer programs. (“TIMER” lights up on Multi Function Display.) For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 91 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Review, Replace or Clear Program Contents: (Recording is not in progress) To cancel a Timer Recording in progress... 1) Press VCR Plus+ PROG.

  • Page 92: Timer Recording Using Vcr Plus+ System

    • If the start time for a timer recording • Make sure to leave VCR comes up during Auto VCR Plus+ off (overnight). System Setup, the timer recording : ACT I ON will have priority. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 93 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Auto VCR Plus+ System Channel Setup (Part 2) Before you perform the following steps, you should have: •...
  • Page 94 : ACT I ON complete. To Make Corrections, press to move to error, then change, or ADD/DLT to erase number. Press ACTION twice to return to normal screen. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 95 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. VCR Plus+ System Programming POWER SELECT/ Ready Checklist Clock is set. :PLAY VCR Plus+ Setup is complete (see pp. 18 - 20). :STOP :REW Press PROG/VCR+...

  • Page 96: Multi-Brand Control Feature

    • Not all functions listed may be controllable. Notes • In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing NUMBER keys for channel selection. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 97 Oak Sigma ........46, 11, 129, 101 Archer ......44, 06, 01, 120, 05, 63, 126 Panasonic ........17, 16, 08, 87, 109 Cableview ....29, 09, 01, 63, 120, 44, 42, 30 Philips ....23, 24, 20, 13, 07, 50, 128, 129 52, 04, 124, 126 Pioneer ............

  • Page 98: Advanced Connections (Cable/Dss)

    AUDIO converter boxes, you select it at CATV an A/B switch, the cable box. IN 1 IN 2 VIDEO OUT 1 OUT 2 and a 2-way VHF/UHF splitter. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...

  • Page 99: Mts Broadcast/ Vhs Hi-Fi Stereo System

    MTS Broadcast/ VHS Hi-Fi Stereo System Connection Make the Audio/Video Connection as shown on the Stereo Amplifier previous page. AUDIO OUT • You can use a TV connected to a Stereo amp and VHF/UHF AUDIO IN speakers instead of a Stereo TV. OUT TO TV Receivable Broadcast Types The following are possible audio broadcast types and on-screen...

  • Page 100: Tape Operation ( And )

    When you are editing or dubbing a tape, or when you do not wish to use this feature, OFF should be selected. Press ACTION again to return to normal screen. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 101 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Playback PLAY When playing back a recording which has been marked using the feature, you can either set VCR to automatically advance through marked commercial blocks, or set it so that commercials are only skipped on your command.
  • Page 102 SRT, Inc. A Jerry lggulden invention licensed in association with Arthur D. Little Enterprises, Inc. U.S.Pat. No. 5,333,091; 5,692,093; 5,696,866 other patents pending For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 103 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Ready Checklist helps you locate certain All connections are made. parts of prerecorded movies (rented or One time Setup completed. purchased).
  • Page 104 • If Index Search is started very close to an index mark, that index mark may not be counted in the search. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 105 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Zero Search To quickly return to a specified tape location. SELECT/ Press DISPLAY during play to display Counter. PLAY :PLAY :STOP...

  • Page 106: Special Vcr Features

    Press ACTION twice then press to change, or ADD/DLT to to return to normal screen. delete the number. Press ACTION twice to return to normal screen. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 107 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Remote Warning ON/OFF Feature If Multi-brand feature is used (p. 22), and this feature is set to on, a warning appears whenever an invalid key is pressed in TV, DSS, or Cable mode.
  • Page 108 BEG I N remaining for tapes 30 minutes or less, or for tapes Press TAPE POSITION over 120 minutes in length. to return to normal screen. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 109 *Important: If a remote control button does not work when pressed, press the VCR button on the remote and try the button again. Auto Shut-Off Feature Weak Signal Display ON/OFF Feature The power shuts off at a preset time. When set to “ON,” picture is displayed regardless of signal strength.

  • Page 110: Copying Your Tapes (Dubbing)

    Guard will have poor quality results. • LINE1: For rear audio/video connection. LINE2: For front audio/video connection. Caution: Unauthorized exchanging and/or copying of copyrighted recordings may be copyright infringement. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...

  • Page 111: Vcr & Cassette Information

    VCR & Cassette Information Head Cleaning Specifications Playing older or damaged tapes may Power Source: 120 V AC, 60 Hz eventually cause video heads to Power Consumption: Power On Approx. 23 watts become clogged. Power Off Video Head Clog Sensor Approx.

  • Page 112: On-Screen Displays (Osd)

    If you press POWER TO CANCEL TIMER REC or STOP during a PRESS POWER THEN Timer Recording... STOP KEY (visible in VCR mode only) For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...

  • Page 113: Before Requesting Service

    Play mode and from Play to Rewind Search mode. If you cannot resolve the problem, please call the Customer Call Center for product assistance at 1-800-211-PANA (7262). To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262). or send e-mail to : consumerproducts@panasonic.com...

  • Page 114: Limited Warranty

    Also, the purchaser will be responsible for shipping the unit to the above address. This warranty is extended only to the original purchaser. Limited Warranty continued on next page. For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com...
  • Page 115 PANASONIC VHS VCR authorized repair facility, or damage that is attributable to acts of God.

  • Page 116: Spanish (Español) Quick Use Guide

    RELOJ en marcha y pase VERANO : ACT VERANO : ACT al paso 4 anterior. FIJACION ES COMPLETO ELEGIR MES For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com Por ayuda llame al 1-800-211-PANA(7262) o envie e-mail a : consumerproducts@panasonic.com...
  • Page 117 *Importante:Si un botón del control remoto no funciona al ser presionado, presione el botón VCR del control remoto y vuelva a intentarlo. Operaciones básicas para la Programación fácil para la reproducción grabación con temporizador Inserte un cassette, Presione PROG/VCR+ para visualizar PROGRAM. Presione PLAY para reproducir el cassette.

  • Page 118: Index

    MTS Broadcast ..........25 Zero Search ............ 31 Multi-Brand Control ........22, 23 Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 Printed in Indonesia LSQT0509A Panasonic Sales Company (“PSC”), S1201-0 Division of Matsushita Electric of Puerto Rico, Inc.
  • Page 119 +0.24Vp-p +40mVp-p V1 +5.2Vp-p +0.24Vp-p +0.24Vp-p OF MODELS & MARKS MODEL MARK PV-V4022-K PV-V4522-K PV-V462 PV-V4602 PIN 100 OF IC3001 PIN 92 OF IC3001 PIN 67 OF IC3001 PIN 93 OF IC3001 CUE/REV CH1 TP3002 CH1 TP3002 CH2 TP6205 CH2 TP6205...
  • Page 120 COMPARISON CHART +1.0Vp-p +2.500VDC +5.00Vp-p +4.0Vp-p +90Vp-p +0.44Vp-p OF MODELS & MARKS MODEL MARK PV-V4022-K PV-V4522-K PV-V462 PV-V4602 TP6206 POWER ON CH1 PIN 2 OF P3501 REC SLP TP6209 REC/PB TP6205 REC/PB PIN 7 OF T1001 PIN 53 OF IC4201...
  • Page 121 10.2. MECHANISM (BOTTOM) SECTION...
  • Page 122 10.3. CASSETTE UP COMPARTMENT SECTION...
  • Page 123 10.4. CHASSIS FRAME AND CASING PARTS SECTION...
  • Page 124 10.5. PACKING PARTS AND ACCESSORIES SECTION...
  • Page 125 11. REPLACEMENT PARTS LISTS BEFORE REPLACING PARTS, READ THE FOLLOWING: 11.1. REPLACEMENT NOTES 11.1.1. General Notes 1. Use only original replacement parts: To maintain original function and reliability of repaired units, use...
  • Page 126 only original replacement parts which are listed with their part numbers in the parts list. 2. IMPORTANT SAFETY NOTICE Components identified by the sign have special characteristics important for safety. When replacing any of these components, use only the specified parts. 3.
  • Page 127 When servicing the washer or the P5 Arm Unit, replace only the P5 Arm Unit with a new one, and remove the washer. 4. Main Cam Gear is supplied as a Main Cam Gear Kit (Ref. No. 8) only. Main Cam Gear Kit consists of a Main Cam Gear and a Main Cam Push Nut.
  • Page 128 Wirewound Flameproof C.B.A.: Circuit Board Assembly P.C.B.: Printed Circuit Board E.S.D.: Electrostatically Sensitive Devices 3. When replacing 0 resistor, a wire can be substituted for it. 4. Since the UHF/VHF TUNER/TV DEMODULATOR UNIT (Ref. No. 743) has already been pre-adjusted at the factory, do not try to adjust the UHF/VHF TUNER/TV DEMODULATOR UNIT.
  • Page 129 11.2. MECHANICAL REPLACEMENT PARTS LIST MECHANICAL REPLACEMENT PARTS Ref. No. Part No. Part Name & Description Remarks VBSS0033 FULL ERASE HEAD LSXK0094 MOTOR BLOCK UNIT LSDB0045 TENSION ARM BOSS LSXY0278 MECHANICAL CHASSIS SUB ASS'Y ( A ) LSXY0279 MECHANICAL CHASSIS SUB ASS'Y ( B,C,D,E,F ) LSXY0280 MECHANICAL CHASSIS SUB ASS'Y ( G ) LSMD0209...
  • Page 130 Ref. No. Part No. Part Name & Description Remarks LSEM0056 CAPSTAN MOTOR ASS'Y ( A,B,C,D,E,F ) LSEM0058 CAPSTAN MOTOR ASS'Y ( G ) LSMM0003 MAIN ROD ( A,B,C,D,E,F ) LSMM0004 MAIN ROD ( G ) LSJW0027 FLEXIBLE FLAT CABLE W/OUT PLUG VXLS1099 S LOADING ARM UNIT VXLS1098...
  • Page 131 Ref. No. Part No. Part Name & Description Remarks LSQF0578 FAN BAG ( E ) LSQF0538 FAN BAG ( F ) LSQF0509 FAN BAG ( G ) LSSQ0263 INFRARED REMOTE CONTROL UNIT ( A ) LSSQ0290 INFRARED REMOTE CONTROL UNIT ( B ) LSSQ0342 INFRARED REMOTE CONTROL UNIT ( C ) LSSQ0300...
  • Page 132 SERVICE FIXTURES AND TOOLS Ref. No. Part No. Part Name & Description Remarks VFMS0003H6 VHS ALIGNMENT TAPE VFKS0081 GREASE VFK0329 POST ADJUSTMENT DRIVER VFK27 HEAD CLEANING STICK VFK0330 H-POSITION ADJUSTMENT DRIVER 11.3. ELECTRICAL REPLACEMENT PARTS LIST PRINTED CIRCUIT BOARD ASSEMBLY Ref.
  • Page 133 Ref. No. Part No. Part Name & Description Remarks IC1001 0N3131-R.KT IC, LINEAR IC1001 PS2501-1-X IC, LINEAR IC1001 0N3131-S.KT IC, LINEAR IC1002 TA76431ASTP6 IC, LINEAR IC1002 C0DAEMZ00001 IC, LINEAR IC3001 NN13400A IC, LINEAR IC3101 MN3885S IC, LINEAR IC3801 AN3275SB-E1 IC, LINEAR ( E,F,G ) IC4151 C0JBAR000292 IC, CMOS STANDARD LOGIC ( A )
  • Page 134 Ref. No. Part No. Part Name & Description Remarks Q3001 B1ADCF000001 TRANSISTOR SI PNP CHIP Q3002 2SB709A-RS TRANSISTOR SI PNP CHIP Q3002 B1ADCF000001 TRANSISTOR SI PNP CHIP Q3003 2SD601A-RS TRANSISTOR SI NPN CHIP Q3003 B1ABCF000011 TRANSISTOR SI NPN CHIP Q3875 2SB0709A0L TRANSISTOR SI PNP CHIP ( E,F,G ) Q3875...
  • Page 135 Ref. No. Part No. Part Name & Description Remarks D1001 DB105G DIODE SI D1001 B0EBKR000003 DIODE SI D1001 B0EBKR000020 DIODE SI D1002 B0HAHP000014 DIODE SI D1002 B0HAJP000007 DIODE SI D1002 B0HAMP000061 DIODE SI D1003 B0HAHP000014 DIODE SI D1003 B0HAJP000007 DIODE SI D1003 B0HAMP000061 DIODE SI D1005...
  • Page 136 Ref. No. Part No. Part Name & Description Remarks R1001 VRESC2TK275 CARBON 1/2W 2.7M R1001 VRESC2TK275C CARBON 1/2W 2.7M R1001 VRESC2TK275T CARBON 1/2W 2.7M R1003 D0AF334JA038 CARBON 1/2W 330K R1004 ERG2SJ333H METAL OXIDE 2W 33K R1005 ERG1SJ560P METAL OXIDE 1W 56 R1006 ERJ6GEYJ222V MGF CHIP 1/10W 2.2K R1007...
  • Page 137 Ref. No. Part No. Part Name & Description Remarks R3810 ERJ6GEYJ473V MGF CHIP 1/10W 47K ( E,F,G ) R3811 ERJ6GEYJ473V MGF CHIP 1/10W 47K ( E,F,G ) R3812 ERJ6GEYJ104V MGF CHIP 1/10W 100K ( E,F,G ) R3813 ERJ6GEYJ563V MGF CHIP 1/10W 56K ( E,F,G ) R3822 ERJ6GEYJ104V MGF CHIP 1/10W 100K ( E,F,G ) R3874...
  • Page 138 Ref. No. Part No. Part Name & Description Remarks R4226 ERJ6GEYJ152V MGF CHIP 1/10W 1.5K ( B,C,D,E,F,G ) R4228 ERJ6GEYJ103V MGF CHIP 1/10W 10K ( B,C,D,E,F,G ) R4453 ERJ6GEYJ333V MGF CHIP 1/10W 33K ( B,C,D,E,F,G ) R4455 ERJ6GEYJ152V MGF CHIP 1/10W 1.5K ( B,C,D,E,F,G ) R6001 ERDS2TJ101 CARBON 1/4W 100...
  • Page 139 Ref. No. Part No. Part Name & Description Remarks R6231 ERJ6GEYJ683V MGF CHIP 1/10W 68K R6232 ERJ6GEYJ682V MGF CHIP 1/10W 6.8K R6233 ERJ6GEYJ153V MGF CHIP 1/10W 15K R6234 ERJ6GEYJ103V MGF CHIP 1/10W 10K ( E,F,G ) R6236 ERJ6GEYJ562V MGF CHIP 1/10W 5.6K R6237 ERJ6GEYJ562V MGF CHIP 1/10W 5.6K R6238...
  • Page 140 Ref. No. Part No. Part Name & Description Remarks C1009 VCYSBRE183KX CERAMIC 25V 0.018UF C1010 ECJ2VC1H101J C CHIP 50V 100PF C1011 ECA1HHG4R7I ELECTROLYTIC 50V 4.7UF C1012 ECEA1PEE331 ELECTROLYTIC 18V 330UF C1013 ECA1EM331B ELECTROLYTIC 25V 330UF ( A,B,C,D,E,F ) C1013 ECA1EM102B ELECTROLYTIC 25V 1000UF ( G ) C1016 ECEA1PEE331...
  • Page 141 Ref. No. Part No. Part Name & Description Remarks C3047 ECJ2VC1H181J C CHIP 50V 180PF C3048 ECJ2VC1H560J C CHIP 50V 56PF C3049 ECJ2VF1E104Z C CHIP 25V 0.1UF C3050 ECJ2VF1E104Z C CHIP 25V 0.1UF C3051 ECEA0JKA101 ELECTROLYTIC 6.3V 100UF C3052 ECJ2VF1H103Z C CHIP 50V 0.01UF C3053 ECEA1HKAR47...
  • Page 142 Ref. No. Part No. Part Name & Description Remarks C3826 ECEA1HKAR47 ELECTROLYTIC 50V 0.47UF ( E,F,G ) C3828 ECJ2VC1H101J C CHIP 50V 100PF ( E,F,G ) C3830 ECJ2VB1E563K C CHIP 25V 0.056UF ( E,F,G ) C4001 ECJ2VF1C224Z C CHIP 16V 0.22UF C4002 ECEA1HKA010 ELECTROLYTIC 50V 1UF...
  • Page 143 Ref. No. Part No. Part Name & Description Remarks C4901 ECEA1HKA010 ELECTROLYTIC 50V 1UF ( B,C,D,E,F,G ) C4902 ECEA1HKA2R2 ELECTROLYTIC 50V 2.2UF ( B,C,D,E,F,G ) C4903 ECEA1HKA3R3 ELECTROLYTIC 50V 3.3UF ( B,C,D,E,F,G ) C4904 ECEA1HKA3R3 ELECTROLYTIC 50V 3.3UF ( B,C,D,E,F,G ) C4905 ECEA1CKA100 ELECTROLYTIC 16V 10UF ( B,C,D,E,F,G )
  • Page 144 Ref. No. Part No. Part Name & Description Remarks L1001 ELF15N005A LINE FILTER 0.5A 18MH L1001 ELF18D290A LINE FILTER 0.5A 18MH L1001 G0B183D00001 LINE FILTER 0.5A 18MH L1001 J0HBLD000001 LINE FILTER 0.5A 18MH L1001 VLQS0167 LINE FILTER 0.5A 18MH L1001 VLQS0170 LINE FILTER 0.6A 18MH L1002...
  • Page 145 Ref. No. Part No. Part Name & Description Remarks SW6001 LSSH0002 LEAF SWITCH-SAFETY TAB SW6002 LSSS0012 MODE SELECT SWITCH SW6301 EVQ11A09K PUSH SWITCH ( D ) SW6303 EVQ11A09K PUSH SWITCH SW6304 EVQ11A09K PUSH SWITCH SW6305 EVQ11A09K PUSH SWITCH SW6306 EVQ11A09K PUSH SWITCH ( C,D,E,F,G ) SW6307 EVQ11A09K PUSH SWITCH ( D )
  • Page 146 JACKS Ref. No. Part No. Part Name & Description Remarks JK3001 LSJH0028 AUDIO/VIDEO JACK SOCKET ( A ) JK3001 K2HA608B0002 Hi-Fi AUDIO/VIDEO JACK SOCKET ( B,C,D,E,F,G ) JK3002 K2HA104B0007 FRONT AUDIO/VIDEO JACK SOCKET ( A ) JK3002 K2HA306B0058 AUDIO/VIDEO JACK SOCKET ( B,C,D,E,F,G ) MISCELLANEOUS Ref.

This manual is also suitable for:

Pv-v4602Pv-v4622Pv-v4612sPv-v4022-kPv-v4522-kPv-v4612-k

Table of Contents