Placing A Call; Soft Keys; Status Messages; Forwarding Calls To Another Phone - Cisco 9951 User Manual

Hide thumbs Also See for 9951:

Table of Contents

Placing a call

To place a call on the Cisco IP Telephony (IPT) system you will follow similar dial

patterns that are used with your existing phone.

For all on-campus calling you will dial the 5 digit extension. For all off-campus dialing,

you must enter a 9, then dial the full telephone number, beginning with a 1 + area code

for long distance calls.

Soft keys dynamically change based on the state your phone is in. These buttons are

located on the bottom of the LCD screen. These keys control functionally and features of

your phone. To activate press the button below the soft key. If you don't see a soft key

try pressing the "more" key if it is available. If you still cannot find the soft key you are

looking for it is most likely not a feature you can use in your phones current state.

After setting certain options important messages will flash at the bottom of the screen for

a few seconds after completion.

When the phone is idle a soft key option titled "Forward All" is seen. To forward your

phone press the soft key below and dial the number you wish the phone to be forwarded

to. To turn off the forward press the soft key below "Forward All" again. When the

phone is forwarding calls you will see a message flash for a few seconds indicating your

line is forwarded.

Table of Contents

Show Quick Links

Table of Contents