Page 1
INSTRUCTION MANUAL Recordable DVD DVR-HT120 Home Theatre System Powered subwoofer: ASX-HT120W Front speakers: SX-HT120F Centre speaker: SX-HT120C Rear speakers: SX-HT120R TIMER CLEAR RETURN SELECT TRIM TEST SOUND FUNCTION LEVEL SURROUND MUTE CH/INPUT SYSTEM DISC MENU MENU EDIT DISPLAY REC MODE PAUSE...
Page 2
Do not remove the back cover with mains connected. This set complies with the EMC Directive 89/336 and with the LVD Directive 73/23. Your SANYO product is designed and manufactured with high quality materials and components which can be recycled and reused.
CONTROLS TIMER CLEAR RETURN SELECT TRIM TEST SOUND FUNCTION LEVEL SURROUND MUTE CH/INPUT SYSTEM DISC MENU MENU EDIT DISPLAY 1. Standby button and indicator (STANDBY) (z) Remote control 2. Surround button (SURROUND) Amplifier (Powered subwoofer) controls 3. Function button (FUNCTION) 1.
CONNECTIONS Note: Do not connect the mains lead to an AC outlet until all connections have been made. Please refer to the instruction manuals for the equipments that you are connecting (DVD recorder, TV, VCR, etc.). When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect all of the equipments from the AC outlet until all the connections have been made.
Speaker Placement Front right speaker Centre speaker Front left speaker Surround right speaker Subwoofer Surround left speaker Centre speaker The centre and front left/right speakers have built-in magnetic stray field Front left speaker Front right speaker compensation. They may be placed close to a TV without affecting the colour purity.
Connecting to the DVD Recorder DVD recorder (DVR-S120) Before connecting, remove the protective cap from the socket. Replace the cover when the socket is not in use. Also, remove the protective cap on the optical lead plug. Optical lead Powered subwoofer (ASX-HT120W) If your equipment has a coaxial digital audio output socket, use the COAXIAL DIGITAL AUDIO IN socket.
OPERATION In the CO (Coaxial)/OP (Optical) function: Either the main unit or remote control can be operated. However, If the signal is encoded with Dolby Digital 5.1 channel surround sound: for convenience, this instruction manual explains operation using s D (Dolby Digital) the remote control.
Adjusting the speaker volume balance Adjusting the delay time (Using the main unit only) This unit is set to the standard level before shipping from the factory. You The sound from speakers can reach the listening position at different times may not need adjustment.
Sleep timer operation (Using the main unit only) To check the remaining sleep time Press [SOUND] once. After several seconds, the “MENU ON” status The sleep timer automatically switches off the power after a preset time returns. has elapsed. There are 5 time periods available: 15, 30, 45, 60 and 90 minutes.