System Management
Log Management
STEP 6
NOTE
STEP 1
STEP 2
STEP 3
Cisco RV315W Broadband Wireless VPN Router Administration Guide
•
Receiver: Enter the email address used to receive the logs.
•
SMTP Server: Enter the IP address or Internet name of the SMTP server.
•
SMTP Port: Enter the port number of the SMTP server.
•
Mail Subject: Enter the subject name of the email. For example, if you set the
device name as the subject name, the email recipient can quickly recognize
which device the logs are coming from.
•
Number of Logs: Enter the maximum number of logs that can be sent in an
email.
•
Interval: Enter the period of time that you want to send the logs.
•
Username: Enter the username to log in to the SMTP server.
•
Password: Enter the password to log in to the SMTP server.
Click Save to save your settings.
Configuring Log Facilities
Use the Log Facilities page to specify which system messages are logged based
on the facility and determine where to save logs and whether to send logs to a
specified email address on schedule.
Before you configure the log facilities, make sure that you set the log settings on the
Log Settings page. See
To configure the log facilities:
Click System Management > Logs > Log Facilities. The Log Facilities page
opens.
In the Status area, click Enable to enable logging on the RV315W, or click Disable
to disable this feature.
If you enable logging on the RV315W, specify the following information:
•
Facility: Check the Enable box for a facility to log its events.
•
Severity: Choose the severity level of the events that you want to log. The
event severity levels are listed from the highest severity to the lowest
severity, as follows:
Configuring Log Settings
for more information.
9
103