Policy-Map Command; Qos Match Statistics Command; Policy Maps Feature; Policy Map Scaling Phase 2 - Cisco 10000 Series Configuration Manual
Quality of service configuration guide
Hide thumbs
Also See for 10000 Series:
- Configuration manual (370 pages) ,
- Troubleshooting manual (70 pages) ,
- Installation manual (14 pages)
Table of Contents
Advertisement
QoS Features, Commands, and Changes
policy-map Command
Cisco IOS Release: Release 12.0(17)SL
Description: This command was introduced on the PRE1 to configure a QoS policy map.
Cisco IOS Release: Release 12.2(16)BX
Description: This command was introduced on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This command was integrated in Cisco IOS Release 12.2(28)SB for the PRE2.
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3.
Cisco IOS Release: Release 12.2(33)SB
Description: This command was introduced on the PRE4.
qos match statistics Command
Cisco IOS Release: Release 12.2(31)SB2
Description: This command was introduced on the PRE3 to configure the router to count QoS matches
for each class or for each match statement and class. Per-class counts provide for greater QoS scalability.
Policy Maps Feature
Cisco IOS Release: Release 12.0(17)SL
Description: The QoS policy map feature was introduced on the PRE1 to configure a QoS service
policy.
Cisco IOS Release: Release 12.2(16)BX
Description: This feature was introduced on the PRE2.
Cisco IOS Release: Release 12.2(28)SB
Description: This feature was integrated in Cisco IOS Release 12.2(28)SB for the PRE2.
Cisco IOS Release: Release 12.2(31)SB2
Description: This feature was introduced on the PRE3.
Policy Map Scaling Phase 2
Cisco IOS Release: Release 12.2(33)SB
Description: This feature was introduced on the PRE2, PRE3, and PRE4 to allow up to 8192 policy
maps per system.
Cisco 10000 Series Router Quality of Service Configuration Guide
1-54
Chapter 1
Quality of Service Overview
OL-7433-09
Advertisement
Chapters
Table of Contents
