Configuring Network-Policy Tlv - Cisco Catalyst 2960-XR Configuration Manual
Switch interface and hardware component
Hide thumbs
Also See for Catalyst 2960-XR:
- Security configuration manual (404 pages) ,
- Configuration manual (196 pages) ,
- Configuration manuals (120 pages)
Table of Contents
Advertisement
Configuring LLDP, LLDP-MED, and Wired Location Service
Command or Action
Step 5
copy running-config startup-config
Example:
Switch# copy running-config
startup-config
Configuring Network-Policy TLV
Beginning in privileged EXEC mode, follow these steps to create a network-policy profile, configure the
policy attributes, and apply it to an interface.
SUMMARY STEPS
1. configure terminal
2. network-policy profile profile number
3. {voice | voice-signaling} vlan [vlan-id {cos cvalue | dscp dvalue}] | [[dot1p {cos cvalue | dscp dvalue}]
| none | untagged]
4. exit
5. interface interface-id
6. network-policy profile number
7. lldp med-tlv-select network-policy
8. end
9. show network-policy profile
10. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
Switch# configure terminal
Step 2
network-policy profile profile number
Example:
Switch(config)# network-policy profile
1
OL-29420-01
Catalyst 2960-XR Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX1
Purpose
(Optional) Saves your entries in the configuration file.
Purpose
Enters global configuration mode.
Specifies the network-policy profile number, and enter network-policy
configuration mode. The range is 1 to 4294967295.
Configuring Network-Policy TLV
63
Advertisement
Table of Contents
